I need the macro for deleting duplicate rows only it should keep one lowest value row.
for e.g.
Column A Column B
TS1234 100
TS1234 50
TS1234 200
Macro will compair dublicates in column A & it will keep lowest value row (i.e. 50 value in Column B), other dublicate rows will be deleted.
In Column "C" there is a list of numbers ( these number realte to incidentsm and are called incident IDs) and I want to delete the rows that have duplicate incident IDs.
the row of numbers looks like this ....
I have an excel spreadsheet with approximately 10000 rows. There are approximately 10 columns...
Column A - person's ID number
Column B - name
Column C - Street Address
Column D - City
Column E - State
etc...
It being such a large list there are many many duplicates (it was pulled from a bunch of different excel spreadsheets and combined into one via copy and pasting one document into the other).
I figured out a way to have excel highlight the duplicates in a different color... but scrolling through 10k people and deleting the duplicates is obviously very tedious (approx 40% of the spreadsheet is duplicates).
Is there a way to sort out the duplicates (via their ID number, column A) so that there are no repeats? I want to get rid of the 2nd/3rd/4th (etc) occurance of the person's information but I was to obviously keep the first occurance.
I tried using Advanced Filter but I must have done something wrong because it shrunk the list too far down.
I have a spreadsheet with only 80 rows in it and I need data from another spreadsheet with over 200 rows. One of these rows in each spreadsheet contains a matching field (Job #). I only want the 80 matching rows data from the over 200 row sheet.
Is there an easy way to combine these two. Even adding the 80 to the 200+ will be fine as I can just remove the blanks. I can't figure out a way to combine them and match them up.
I need to merge rows with duplicate values in column A (Patient Name being the most important one), with columns B, C, & D usually having different isolated values as well. Columns E, F, G, H, & I are date columns, but the data is always going to be the number 1, meaning a patient was seen once that day (if they were seen two times that day for different reasons, information would be in an unmerged second row [same patient name listed in two separate rows], where columns B & C would be different). Column J is an autosum of columns E through I if that makes a difference. Column K is a notes column. The data that needs to be merged is always added to the bottom of the spreadsheet in order to show that a patient was seen on any given day, with columns B through K almost always being blank. Example:
Column A---------Column B---Col C----Col D--Col E--Col F--Col G--Col H--Col I--Col J---------Col K
Patient Name-----Therapist---Shared--%P----2/3----2/4----2/5-----2/6----2/7---Total Visits--Notes
Alice Alpha--------AB----------PT-------1---------------------------------------------0-------------blah
Boris Beta---------BC----------SELF----2----------------------------------------------0------------blahblah
Carl Carlisle-------CD---------PTA------3----------------------------------------------0
Carl Carlisle-------AB---------SELF-----2----------------------------------------------0
Donny Delta-------DE---------PT--------1---------------------------------------------0
Ernie Elephant-----EF---------PTA-------2---------------------------------------------0
Alice Alpha-----------------------------------------------1
Carl Carlisle--------------------------------------1--------------1---------------1
Ernie Elephant-------------------------------------------1---------------1
This is what I'm hoping it can look like:
Column A---------Column B---Col C----Col D--Col E--Col F--Col G--Col H--Col I--Col J---------Col K
Patient Name-----Therapist---Shared--%P----2/3----2/4----2/5-----2/6----2/7---Total Visits--Notes
Alice Alpha--------AB----------PT-------1---------------1-----------------------------1-------------blah
Boris Beta---------BC----------SELF----2----------------------------------------------0------------blahblah
Carl Carlisle-------CD---------PTA------3-------1--------------1---------------1------3
Carl Carlisle-------AB---------SELF-----2----------------------------------------------0
Donny Delta-------DE---------PT--------1---------------------------------------------0
Ernie Elephant-----EF---------PTA-------2--------------1---------------1-------------2
In this example Carl Carlisle is being seen for two different things, however how would it be written so the macro would know which Carl Carlisle row to merge with? I'm thinking that before running the macro I could manually enter the information into column B so it knows which Carl Carlisle row above to merge with.
Data always starts at row 14 (row 13 is frozen pane header column), and extends to a row that is different every week depending on how many people happen to be in the list.
I found something from this link that looks very similar to what I need, but with no knowledge of coding, I have no idea how it should be tweaked: Merge Duplicate Rows Keeping Data In Same Columns
I know I'm asking a lot, but the amount of time this takes to manually go through hundreds of rows of patient names every week is incredibly time consuming, and I have too many other things to stay on top of at work for this to drag me down day in and day out.
After sorting and filtering rows with in a set range I will have several rows that are almost duplicates. This is normal and expected due to how the workbook is used. Among these rows also will be several single rows that are not duplicates. It is important that I combine any two duplicates into one row. Example:
CREATE TABLES LIKE BELOW?
ABC D E F G H I J K
1 NameA 0XX15930777PS101300PS9
2 NameA0XX15930777PS91200PS10
3 NameX1159XXP555FBX1545PS9
4 NameB0A1234P123PS101263PS9
5 NameB1A1234P123PS90512PS10
What I need is this end result:
CREATE TABLES LIKE BELOW?
ABC D E F G H I J K
1 NameA 0XX15930777PS91200PS10PS101300PS9
2 NameX1159XXP555FBX1545PS9
3 NameB1A1234P123PS90512PS10PS101263PS9
Its important that the data in each column stay with in that same column. Also of course it needs to be on the same row with the same person (NameA and NameB). The Columns that would determine if its a duplicate are D and E . I would need this to be preformed via macro or some easy way so that others will not have a hard time. It will be on a protected Shared Workbook with Excel 2003. I've enclosed a Sample. How can I sort these or accomplish this and maintain the data where it needs to be?
I need to sort my data by the oldest date first in colum L (NEED_DATE), but I need to keep the rows grouped by colum A (Material No). See example of data.
Material No
Tool No
Prodn Ordr No
Curr Oper No
Curr Workcenter Cd
Next Oper No
Next Workcenter Cd
[code]....
In my Excel 2003 worksheet I need a macro to search column B for duplicate entries. The data in column B is both numeric and string. If there are any duplicate entries, then I need the duplicate rows to be deleted.
View 4 Replies View RelatedI deal with leads for a sales room and get sent over leads in bulk, I've created a master scrub list that I can attach to the end of a new lead file and sort by number to show which are duplicates.
When you do the: Data, Filter, Advanced Filter, select Unique Records, it hides the duplicate but what I need is not only for the duplicate to be hidden or gone but the row that it is a duplicate of, i.e. I need BOTH rows to go
Name-----number
Dave 555-1212
Dave 555-1212
John 536-2343
Smith 423-2312
needs to become
Name-----number
John 536-2343
Smith 423-2312
I would need a formula that figured out that Dave with number 555-1212 was a duplicate and delete BOTH rows,
I found a useful resource on the web that gives a macro that deletes rows when the cells within a SINGLE column are identical. [url]
Does anyone know of a macro that can do more than that, one that will delete rows if ALL cells within ALL columns are identical?
For example, the macro should delete row 4 of the attached spreadsheet. It should leave row #2 there because it's the orginal row. But the duplicate row #4 should be deleted. The macro should leave row #5 there because not all columns are identical for that row.
I have a spreadsheet that I need to delete duplicate rows in. However, in order to determine if a row is a duplicate I need to check 2 cells per row. In the attached file you will see that each row has 4 cells. I need to compare the cells in columns B and C with the B and C cells of the Row beneath. If the B and C cells match then it is considered a duplicate and one of the rows needs to be deleted. Also, there may be multiple duplicate rows.
For an example see rows 17, 18 and 19. I only need 1 row to remain.
I am looking for a vb script that would analyze a file with thousands of rows and delete the duplicates.
I have a sheet whereby in column A i have company names and column B how much is invested in this company so:
A B
AAPL 10
GOOG 5
MSFT 15
APPL 5
IBM 20
GOOG 10
What i would like to do via macro is take all the duplicates sum them so that i see AAPL as 15 but only be left with one row. So we would be left with only 4 rows each with their summed weight.
I have a long list (over 1000 lines) of numbers, some of which are duplicated. Up to now I have been sorting them, adding in a simple check column to see if the number is a duplicate of the one below, and then manually deleting this cell.
Is there a better way to do this using VBA? The only way I have managed to find is by deleting the entire row, but I cannot do this as I have additional data to the right that I need to keep.
I also cannot install any add-ons as this on a work computer.
I have many rows that contain some common data but I need to be able to select the row with the most recent data and delete the others. For example, a car part is assigned a unique number which never changes, it may be ordered several times and in different quantities, for each car part I want to select the most recent order and delete any others. Is there a simple way of doing this?
View 9 Replies View RelatedI have a sheet with 45,000 rows. Let's say each row has 4 columns: Create_timestamp, Update_timestamp, email_address, and o_flag
Many rows have duplicate email addresses. I would like to remove all the duplicate rows, EXCEPT for the row with the most recent Update_timestamp.
And actually, if I could just "hide" all those rows, that would be even better, but I'd be happy just figuring out how to delete all the "old" rows, so I just have a list of unique email addresses, with their create/update timestamps and o_flag column. Seems like this is such a basic use case for "Remove Duplicates,",.
I have an excel spread sheet with several rows of 265 (9A-IV) columns each with a heading. I would like to transpose the worksheet columns so that the heading is placed in Column A against the corresponding that is placed in column B. For example
ABCD14692571038Transpose to A1A2A3B4B5C6C7C8D9D10
Below is an example of an Excel sheet I'm working with: [URL]
Basically, I'm trying to delete the duplicate rows by matching ID, Date and Type. If ID, Date and Type are the same, then, I want to only keep the record with the earliest Time in case of Type = In and the latest Time in case of Type = Out.
So, for example, in the case of ID = 1, there are 3 records for In, I only want to keep the one where Time is: 8:01 as this is the earliest. The other 2 records should be deleted.
Similarly, in the case of ID 3, I want to keep the record where Time = 18:05 as this is the later time out of the 2.
Can this be achieved by Conditional Formatting or Macro or VBA?
I am looking for some code that will use A,B,C as filters to find duplicate cells, and if duplicate found, there should be deleted the duplicated row (but not only the row from a,b,c column, but the whole 8 cells from that row - A,B,C,D,E,F,G,H).
As filter I would like to be used A,B,C columns.
EXAMPLE:
BEFORE
A B C D E F G H
Kristijan Markovski 26,2,1992 1389 Prilep Prilep Mice Kozar1 1
Kristijan Markovski 26,2,1992 1389 Prilep Prilep Mice Kozar01 1
Kristijan Markovski 26,2,1992 1389 Prilep Prilep Mice Kozar001 1
Bojan Smileski 5,2,1992 1356 Prilep Prilep Borka Taleski 1
AFTER
A B C D E F G H
Kristijan Markovski 26,2,1992 1389 Prilep Prilep Mice Kozar1 1
Bojan Smileski 5,2,1992 1356 Prilep Prilep Borka Taleski 1
I have imported and filtered a .csv. to specified sheet names. I have rows that have been sorted by a specific column's cell contents. i.e.
A B C C E F G H I
xxx xxxx xxx xxx xxx 1 xxxx xxx xxx
xxx xxxx xxx xxx xxx 1 xxxx xxx xxx
xxx xxxx xxx xxx xxx 2 xxxx xxx xxx
xxx xxxx xxx xxx xxx 2 xxxx xxx xxx
xxx xxxx xxx xxx xxx 2 xxxx xxx xxx
I need to be able to select all the rows or ranges that contain a common value 1's and then loop back and select the next group 2's of rows until the row or column contains "".
With a macro i want to delete some lines in sheet1. In sheet2 however i have formulas that point on sheet1 .. like this
=sheet1!A1
=sheet1!A2
=sheet1!A3
Now when i delete line 2, the result would look like this
=sheet1!A1
#NV!
=sheet1!A2
Is there a way to make these formulas pointing at the same cells after line two is deleted? And i do not mean a work around, with different formulas. I just want the Formulas in sheet2 to remain unchanged, regardless of what happens in sheet1...
I am attaching a small sample data set. The first column contains the ID numbers and the second column has the dates. The rest of the columns are some data. When you look at the ID numbers, there will be some common ID Nos. numbers, for example, 300003 (4 in number) but the dates are different for them. What I am going to do is to create a pivot table with the ID Nos and the months. But I want the date to be only the oldest date for example, I want the date for 300003 to be 12/3/2004.
View 6 Replies View RelatedI have a sheet where i want to delete duplicate rows where column A and column B combined are equal, i.e. range(Ax:Bx) where x is the current row. I am using the macro below but cant seem to get it working as I keep getting a type mismatch error and Im not sure why.
View 2 Replies View RelatedHow can I delete rows in a worksheet using values in a certain column as criteria?
Example: I want to delete all rows that show a value of zero in column k. How is this done?
I am trying to create a search function in a database I have made. I have a userform with drop down boxes that people can choose what they want to search for. Once they have chosen and clicked the search button I want it to search only in the relevant column, i.e. search for the word in the dropdown for "engine" only in the "engine" column of the database. Once it has found the appropriate cells with the answer, I want it to delete all other rows that don't include the answer.
Once it's done this it needs to do it again for the other fields, unless they are empty. I have used 'If engine_type <> "" Then' as the starting point so that it only searches chosen fields.
I'm trying to get a VBA macro put together that would delete all the rows, throughout every sheet, and shift up wherever the cell in column A = "Delete Row" in a workbook I've made. In the below copy of the workbook you can see that a lot of the information from all the tables is linked to the topmost table on the 'Mix Detail Sheet'.
If the the Cell in column A is blank on that first table, its corresponding cells in tables throughout the workbook displays the words "Delete Row". I need the macro to delete the rows and shift everything up where this occurs.
Ideally I'd also like the macro to then delete the rows in that first table where the column A cells are blank.
I have attached a spreadsheet of sample data. Column I has duplicates and the data in columns A to H are in any of the duplicates. I want to eliminate the duplicates and align the data in the other colums to the single row. Eg I2 and I3 are the same value, I want to end up with only one row with the value 27217 and the data in F2 and G3 to end up in the single row. If value 27217 is in I2 only then F2 will still contain 5 but 6 will be in G2 not G3.
View 3 Replies View Relatedwith deleting duplicate entries in a spreadsheet that contains two names, a code number and a date. All rows with a duplicate number in column “B” should be deleted. Write a micro code? I have a few thousand of entries that need to be knocked out.
A sample file is attached : Example.xls
I have a worksheet with two columns and a few hundred lines. One has titles and the other integers indicating how many times the title needs to be copied to another worksheet or text file.
Existing Worksheet (Input)
TitleA1
TitleB6
TitleC4
TitleD3
Desired Output (Worksheet or Text File) [The entire row, including the integer could be copied as well, if it is easier.]
TitleA
TitleB
TitleB
TitleB
TitleB
TitleB
TitleB
TitleC
TitleC
TitleC
TitleC
TitleD
TitleD
TitleD
i have to clean a worksheet from duplicat rows. The list looks like:
A---------B-----------C
a---------s-----------b
a---------f------------b
a---------s-----------b
a---------e-----------d
a---------d-----------v
Those rows have to be deleted where duplicates exist in column A and C. In our example the first three rows would meet the criteria and two of them have to be deleted. Content of Column B has to be merged with ";" but without duplicates. The result would then look like:
A---------B-----------C
a---------s;f----------b
a---------e-----------d
a---------d-----------v
I need a VBA/macro very similar to several I have seen posted here. I have a worksheet with two columns and a few hundred lines. One has titles and the other integers indicating how many times the title needs to be copied to another worksheet or text file.
Existing Worksheet (Input)
TitleA1
TitleB6
TitleC4
TitleD3
Desired Output (Worksheet or Text File) [The entire row, including the integer could be copied as well, if it is easier.]
TitleA
TitleB
TitleB
TitleB
TitleB
TitleB
TitleB..............