Find Minimum In Multiple Tables & Match To Heading
Referring to the post Find Min Value In Multiple Columns And Match The Header. I would like to go little bit further and see is there a way to find and match not just in multiple columns but in multiple tables (see the example)
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Find Heading To Match CheckBox & Hide / Unhide Column
I need to work with the run times for some equipment. This is just hours and minutes and I get the raw data as like "Pump # 1 - 35:30". This is not date/time data per se, just a raw number of hours. I thought I would format the cells as hh:mm and for 15:00 I would just enter 15 to save time. No go, that becomes 1/15/00 00:00 and displays as 00:00. I discovered that if I just leave the formatting as general and enter 15:00 it works fine and displays right but the formula bar says 3:00 PM (Excel figured to format it hh:mm). When I enter 30:00 it again seems fine but the formula bar says Excel stores it as 1/1/00 6:00:00 AM (Excel figured to format it [h]:mm:ss but I deleted the seconds). I can just set the formatting as [h]:mm to be consistent and enter the full 15:00 but I guess that after working that out I am just curious - can Excel store hours:minutes as just hours:minutes without turning it into a meaningless date? And without converting it to a decimal number? I don't want to total 1:30 + 1:45 = 3.25; I want the total to be 3:15. Again, it appears that [h]:mm will do what I need but it just seems unelegant to me that it is stored as some weird date and I wonder if it will cause a problem at any point.
View Replies!
View Related
Find 2 Corresponding Values & Multiple The Minimum
Look in Column A and find the cell that contains "Std A 1" and the cell that contains "Std A 2". Compare the corresponding values in Column B, and multiply the lowest value by .2 I've tried using various methods (find, if cell.value.instr) but I keep getting errors. Can anyone point me in the right direction?
View Replies!
View Related
Search/Find Values From Multiple Tables/Worksheets
As in attached file, I have 5 tables: Table 1: matrix that contains Weight data in each cell Table 2: matrix that contains Code data in each cell Table 3: Relationship between Code and Level data Table 4: Table with relationship between Weight data, Code data and Level data Table 5: I want to populate each cell in Table 5 matrix from getting values from Table 4 by looking up the right value from Table 5 based on : 1) Weight data from corresponding cell in Table 1 2) Code data from corresponding cell in Table 2 3) Code and Level relationship. for e.g. to get value for Table 5, Worksheet cell B140 ( intersection of A1-A1), 1) corresponding weight is 1.17 as in Table 1 (Weight data) (Worksheet cell B3) 2) corresponding Code is 6 as in Table 2 (Code data) (Worksheet cell B35) 3) Code 6 corresponds to Level 2 (as seen in Table 3)(Worksheet cell A74) so, looking up the 3 values from Table 4 i.e. Level 2, Code 6, Weight 1.17, one gets cell AR98 with corresponding value. therefore, final value in Table 5, Worksheet cell B140 (intersection of A1-A1) will be equal to $4.00 I have been trying to solve this using Vlookup, Hlookup, Index/Match but am getting confused. Also, not too sure if this can be done in 1 step. New to these excel and these functions
View Replies!
View Related
Find Min Value In Multiple Columns And Match The Header
I am trying to find min value for a row (product price) within two columns (price lists) and return row one (company name) in third column ( see the attachmet). My first idea was to use “min” and “if” but a problem occur when there are text or zero or none values in the price list. I tried with conditional formatting, offset function, match-index and other methods without success
View Replies!
View Related
Match Criteria According To MINIMUM And MAXIMUM
I need a macro that will search MIN and MAX columns and identify which horse has the maximum number in both the MIN and MAX columns an example is highlighted yellow in the attached spreadsheet. If there is a selection i want the macro to keep the horse that matches the criteria along with the race date and time e.t.c (header) but delete all other horses in that race. If there are no selections that meet the criteria in a race i want it to delete all details for that race including headers and go to the next race.
View Replies!
View Related
Find Value In Row, Then Return Heading Above It
I have a 10x10 table. First row contains column titles (plain text, hardcoded). Each line below them has a 1 in *just one* cell. So, each line contains 9 zeros and one 1. In the 11th column I want to check which column has the 1 in it and return the column's title. So, if the 5th row has a 1 in cell E5 I should get, in K5, the value of E1 (the title of the E column that is).
View Replies!
View Related
Find Current Date Heading Column
I have created a simple command button for tallying that will increase the count in the output cell by one every time it is clicked. It has basic code like this: Private Sub ProductRegistration_Click() [D4] = [D4] + 1 End Sub On top of that, I want the output cell of this command button to switch every day. In this case, it would move to E4 tomorrow. The columns are dated but I can't figure out how to get the output cell to automatically change with the system date so I don't have to manually change it every day.
View Replies!
View Related
Multiple Menu Items Under One Heading 2003
I've got several add-ins that I'd like the end user to install and have accessible under one menu item ("Assessments") in Excel 2003. So far, the code below successfully adds the item, but it only shows the item of one add-in. How can I get it to show all the items under the "Assessments" category? Private Sub Workbook_Activate() Run "AddMenus" End Sub Private Sub Workbook_Deactivate() Run "DeleteMenu" End Sub Sub AddMenus() Dim cMenu1 As CommandBarControl Dim cbMainMenuBar As CommandBar Dim iHelpMenu As Integer Dim cbcCutomMenu As CommandBarControl
View Replies!
View Related
Align 2 Tables, Match Two Outputs From A Database
My goal is to match two outputs from a database so that the same person's record can be found on one row. At present output 2 does not marry up to output 1 due to staff leaving and new appointments being made. The data in output 1 should remain static. The data in output 2 must be manipulated to match the order of output 1. Output 1 is a 5 column record containing (in A6:E6) Forename, Surname, Branch, Roll Number, and a % score Output 2 is again a 5 column record containing (in G6:K6) Forename, Surname, Branch, Roll Number, and a % score Each employee can be identified by a unique Roll Number Code contained in the fourth column of each record. If an ideal match has been found I'd like the letter Y to be inserted in the L column of each record to signify a positive comparison. All non matches should have the letter N in the L column & these non matches should be placed at the bottom of the dataset.
View Replies!
View Related
Find A Minimum Query
I have a set of worksheets all of which are identical and covered by first:last sheets What I am trying to do is come to up with a minimum figure for cell G30 With the proviso that it is a minimum of 30 as some of the entries in G30 are less than that figure. =MIN(first:last!G30) is not the answer as it gives an answer of zero.
View Replies!
View Related
Find Minimum Value Corresponding To Maximum Value
I am having trouble with large data sets of rents by market: trying to find the peak rent in a time-series, and then look for the next trough rent in time. I tried using the Newsletter 3 techniques which feels like the right direction, but I am not getting the nesting right or some of the parameters in the functions. So, within each time-series I need to find the MAX value (peak rent), wherever that is in the array. Then I need to look to the right of that exact MAX value and find the exact MIN value (trough rent), whereever that is in the array (again, to the right of the MAX value). A small sample of what the data set looks like: 2008 Q22008 Q32008 Q42009 Q12009 Q22009 Q3 Atlanta771773768761749756 Austin770786784779776776 Baltimore947948949950950953 Boston1,6471,6601,6541,6481,6301,613 Chicago998998996985984986
View Replies!
View Related
Find Minimum Value From A Data Group
I have been trying to solve this problem for the past couple of weeks and I have not been able to do so. I have come to do the operation manually, and it really takes a lot of my time, so if you guys could help me, I would really appreciate it. Basically the problem is this: In column "A" I have what I call point numbers for all the data entries. In column "B" I have the station (or location) at which I vary slightly a parameter (represented by column "E") to give me a value shown in column "D" (the "Z" value, as shown in the sheet). So basically you can see that my station 0 has 11 different "E" parameters (0, -1, -2.62, -5, etc) and each of them has a "Z" parameter (390.76, 390.775, etc). What I am trying to do is to come up with a table that shows a summary of the following: A column with each of the stations (0, 20, 40, etc -- notice that I have some weird numbered stations like 411.89). Another column with the "E" parameter corresponding to the lowest (or minimum) "Z" parameter within the station range. And a final column with the minimum "Z" parameter corresponding to its "E" parameter, which is included in the station range You can see in yellow the way I have been doing this and you can see that it would take me so much time to accomplish the task.
View Replies!
View Related
Find Minimum With Criteria - MINIF
I have following problem I have some table - 2 columns - in first is text in second is value. example: A 10 B 5 C 3 A 15 C 8 D 7 A 9 I need to use formula, which shows me minimal value for choosen text. I tried matrix formula like {=min(if(text table=choosen text; second column;0}, but it's not working
View Replies!
View Related
Conditional Count (Find The Minimum Value In The Range)
I am trying, without success, to create a formula that will refer to a column of data and do the following in one step: 1. Find the minimum value in the range, and then 2. From that minimum value, count back “up” the column the number of occurrences, including the minimum value, until a zero is reached. The zero should not be counted. For example, if the values in A1:A6 are 1, 0, 2, -1, -2, 1, the minimum value is -2 and the count would return 3. (i.e. 2, -1 and -2)
View Replies!
View Related
Find Minimum/Maximum Excluding Zeros
I have inherited some legacy templates (Standard, Leave and Exception) which cannot be changed. I need to summarise them (Total) selecting the earliest start and the latest finish. (Sample attached). The templates are 90 columns wide and about fifty lines deep so named ranges isn't practicle (I think). I'm running 2003.
View Replies!
View Related
Find Minimum Value In Column Corresponding To Specific Text
I have a table that contains various aspects of information about customer cases, and I want to replicate a user 'picking up' the case by a simple press of a button. Users have access to only one Country, so I want to be able to search a particular column for the lowest value, but check that the Country for that row matches the user's access. If it doesn't, I then want to find the next lowest value in the column, and this is what's perplexing me??? As mentioned, I want to click a button to trigger this, and therefore want to use VBA code.
View Replies!
View Related
MINIMUM If With Multiple Criteria
I am trying to find the minimum date in column B based on the value in column A and the Maximum date in Column C. I already have a calculation for column C that ignores certain values, i am fine using that date.... On the first sheet, I have.... the "summary of data" The date in column C is the Maximum value ignoring 3 certain dates (10/10/2030, 11/11/2011, 12/12/2012) I used this formula to find that value. =MAX(IF((Sheet2!A$3:A$16=A4)*ISNA(MATCH(Sheet2!C$3:C$16,{47766,41255,40858},0)),Sheet2!C$3:C$16)) Now, based on that I need to find in column B the Minimum value based on both the value in Column A (item) and the maximum date already found in colum C (Max)
View Replies!
View Related
Lookup Functions Find The Address Of The Minimum Value In That Range
I have a range of cells (say A1:D8). I wanna find the address (say $B$2) of the minimum value in that range. This command does it but it only works on a column. it does not accept a range spanning more than one column. =CELL("address",INDEX(B2:B7,MATCH(MIN(B2:B7),B2:B7,0))) this will tell me the address of the minimum value.. but in a column... I need a range of many columns. So I tried converting things to a Table.. but it never worked. basically the MATCH command is my problem. It only accepts single-column-ed ranges.
View Replies!
View Related
Finding Minimum Value Using Multiple Criterias
I have managed to make a work queue and lots of other stuff for the model, but I can't get it to take orders in the way I want it. Each order has a order number (from 1 to 100) and the orders come in almost randomly e.g. 3, 5, 11, 2, 7, etc. What I want to do is to take the smallest available order that has not been processed in. The available orders column and processed orders look something like this: A B C D Time, Available, Processed, Start processing 5 2 0 2 10 0 0 0 15 0 0 0 20 0 0 0 25 5 0 0 30 0 0 0 35 0 0 0 40 0 0 0 45 4 2 4 50 0 4 0 55 7 0 5 60 6 5 6 Zero means no new orders or no processed orders. Now the Start processing column should select the smallest not processed order if previous order has been processed. A have, for now at least, all other problems solved, but can't figure out how to get start processing column check for the smallest not processed order line. I have tried combination of Min and Max functions with If, but it soon requires too many Ifs to make any sense out of it. I also tried the Dmin function, but it wasn't up to the task becouse the model requires ~1000 lines and as Dmin only takes criterias vertically I ran out of columns . So how could find minimum from row one until current row excluding values processed so far and only checking orders available so far?
View Replies!
View Related
Compare Tables And Find Difference
I have two lists (List A and List B) of hundreds of items that reside in a single worksheet. Some items may or may not occur in both lists. Every item in both lists has a value on the range of 1-50. I am only interested in those items that occur in both lists. I need to find the difference of the values for each of these items (List A - List B), including negative values. I have tried many variations of formulas using VLOOKUP with no luck. I cannot figure out how to accomplish this with a Pivot Table. I want to make a macro for this. Here's an example: List A W 29 X 11 Y 13 Z 4 List B V 8 W 10 Y 30 Z 6 Where the results would be: W = 19 Y = -17 Z = -2
View Replies!
View Related
VBA Solver: Find Minimum Value Of Cell By Changing X Cells With Constraints
I'm trying to use solver to find the minimum value of a cell by changing 5 separate cells. These cells are subject to a set of constraints that are formulae. On top of that I have a large number of these solve's to run (The spreadsheet is creating randomly distributed data to form a Monte Carlo simulation). Therefore I am referencing the formulas using the ActiveCell, Offset() function. For some reason when running this code none of the values are changed. Also I changed the UserFinish to false so I could see what solver was doing at each solve, It stops at the correct cell (one after the final cell) but without me having to confirm it each time. Here is the ....
View Replies!
View Related
Pivot Tables To Find Max Value In Time Period
I have a in field column M of my table that gives the week number of various dates within the table. I would like to find the high value reached during each week based on the Highs which are located in column P, the highs consist if workdays during each week number. I would like this to appear as a new calculated field entitled "Week High", I am assuming I need to input a custom formula to do this. I also want to create calculated fields for the the high reached during each year, the year is in column L
View Replies!
View Related
Compare Datas From Multiple Tables
I have 2 tables One is paycheck issued The other one is paycheck cashed My goal is to find out which paycheck is not cashed Table 1 Table 2 PAY CHECK ISSUED PAY CHECK CASHED Name Net Pay Name Net Pay Last, FIRST 76.28 FIRST LAST 76.28 Last, FIRST 163.14 Last, FIRST 193.48 FIRST LAST 193.48 Last, FIRST 156.97
View Replies!
View Related
Vlookup With Multiple Tables (15 To Be Exact)
Okay, so I have this project for my accounting computer applications class. I'm making it so much arder on myself than what it probably should be. But anyways, this project is a four year plan spreadsheet for the business/accounting division of the school. Inside the spreadsheet is a page that has 15 different tables, representing 5 years with 3 semesters each, fall spring and summer. On the requirements for the major chosen, I would like it to automatically recognize if the class has been placed in the semesters tables and recognize all of the information needed. The only problem is, a single vlookup only allows one table per cell but I need all 15. I've heard of using the if statement along with these but I've only heard of it being done with a few tables and not 15, and I don't understand how exactly that works anyways.
View Replies!
View Related
Pivot Tables Multiple Worksheets
Background: I know ZERO about VBA and I am a Vlookup & Pivot Table noob, but experimenting everyday. Every week, since August 29, 2009, I get a sales report from my customer in raw form showing point of sales data for the previous 7 days. After manipulating the data I end up with 11 columns. Now, if I am only concerned with that one week then I can drop the whole sheet into a Pivot Table and all is well. However, I have 12 sheets now (with more to come), one for each week, and the row count ranges from 3,328 to 16,414. I do not want to consolidate the data. I can copy everything to one sheet, and hope not to max out at the million row mark, but would prefer to keep it tabbed by week.
View Replies!
View Related
Perform Vlookup Across Multiple Tables
I am wondering if there is a way of performing Vlookup across several tables? I have tried to create a formula myself based on lookup and nested vlookups, but am getting all tanlged up, especially as I need an If isna formula in there so that if there isn't a result, it displays a 0 rather than a #N/A. See the attached. I do compeltely understand that it would be so much easier if all the data on the commission worksheet was in a simple 3 column table, but it has to be split as it is creating 3 tables. exactly what formula needs to go in cell D7 on the rates worksheet that I can drag down, which will check for those initials across all 3 tables? (The initials will only appear once on the table on the commission worksheet.
View Replies!
View Related
Creating Multiple Pivot Tables Using VBA
I am having a lot of trouble with pivot tables in Excel 2007 VBA. I am trying to create pivot tables using macros (connected to buttons the user can press to create the pivot table) - please don't ask why, but i need to do this!!! I used the record fuction in excel 2007 to produce macro code which will produce the required pivot tables when the user presses a button. Unfortuanately the coding seems to work fine when i have one pivot table in a file but breaks down if i record code to produce another pivot table. I have attached some code below (which was produced by the record function) and is intended to produce 2 seperate pivot tables (the macro submacro2 produces the 1st pivot table and the macro submacro4 lower down the page produces the 2nd pivot table). I have also indicated the point in sub 4 where the code breaks down - basically submacro4 just doesnt run!
View Replies!
View Related
Running Multiple Pivot Tables With Same Macro
I am trying to find a way to set up a macro that will allow me to pull in data - create the Pivot table - delete the table - then pull in fresh data (of a different row length - same number of columns) and create another Pivot table. I have tried to manipulate recorded code to no avail. Here is what I am starting with: Const lngLastPossRow As Long = 65536 Range(Cells(1, 1), Cells(Cells(lngLastPossRow, 1).End(xlUp).Row, 24)).Name = "Data" ActiveWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:="Data"). _ CreatePivotTable TableDestination:="", TableName:="PivotTable2", _ DefaultVersion:=xlPivotTableVersion10 ActiveSheet.PivotTableWizard TableDestination:=ActiveSheet.Cells(3, 1) ActiveSheet.Cells(3, 1).Select ActiveSheet.PivotTables("PivotTable2").AddFields RowFields:=Array(" ", _ "Channel", "Sales/Exchange", "Mode of transp.", "Sold-to Party", "Material", "Data") While it creates the first pivot table fine, after deleting it and starting again it wants to create the next sequence (PivotTable3) which crashes the macro. I must close the file and reopen to run it again.
View Replies!
View Related
Copy Tables From Multiple Sheets To One Worksheet
I need, I do not know Visual Basic, so I need something in simple Excel format that I can use before I am able to take the training (upon reading more threads, looks like VBA is just the editor used to create a macro where I can copy and paste in code text from your suggestions? I think I can handle that). I need to condense multiple tables into one master table, and then perform calculations on those entries. Each table contains three columns, but after being manually pasted -- as I am doing currently -- into the condensed worksheet, there'll be two or three additional columns based on calculations from the entries. The Workbook does currently contain 2 worksheets that do not contain data in this format, so please share code that could exclude those? I am fine with every so often manually applying a formula on the last worksheet that says something like, look in SH1 A2:C300. If entire row is not blank copy over contents, if blank move on to SH2, etc etc. Since I'm a newbie I imagine there are much more efficient ways to do this. I may be a little shaky on the VBA but surely I can copy and paste.
View Replies!
View Related
Combine Data From Multiple Worksheets - Pivot Tables
I am trying to combine sorted data from 2 worksheets to a new work sheet to process further. I have one worksheet with order number, part number, order qty but with different delivery dates. On another worksheet, I have the order number too, part number, the qty delivered. The qty delivered is not always the same each delivery. My aim is to find out how many are already delivered under a certain purchase order and the balance of undelivered parts. I used pivot tables to sort out the data but I am stuck here not knowing how to extra the sorted data from the pivot tables to the 3rd worksheet. I will need to match the order number and the part number.
View Replies!
View Related
Pass Multiple Tables Into Custom Interpolate Function
I have 5 worksheets each with tables that are formatted the same on each sheet. I have named each table as a named range (ex:filter5tsd15BSF). I have a userdefined function that interpolates values for a single table in a vba module. I can make this function work for a single table by calling the function as =Linterp(filter5tsd15BSF,C12) so I know the function is OK. However, I really rather program this some way that all the tables get passed to the function and then a select case for the conditions for which filter and which TSD (15 or 25) will then select the correct table.
View Replies!
View Related
Extract Text From Multiple Tables In Alphabetical Order
how to extract names from a worksheet and put them in another by alphabetical order? There are 6 “could be more” blocks of data on Monday’s Worksheet, not all rows of each block will be filled. The idea is put the data from Monday WS in List WS without spaces and by alphabetical order. Because my English is not good enough, I attached a file with what I need.
View Replies!
View Related
Find In VBA Code: Find Exact Match
I'm using the below VBA Dim c, DataRow With Data Set c = . Range("A5:A350"). Find(KPI, LookIn:=xlValues) If Not c Is Nothing Then DataRow = c.Row End If End With Now,If KPI is for example = "Favourite Hotel" and if i have data that looks like : Favourite Hotel - London Favourite Hotel - Cardiff Favourite Hotel Favourite Hotel - Birmingham Then it seems to not look be looking for an exact match (e.g. Favourite Hotel) and rather is finding the first item in the list that contains the KPI string (E.g. Favourite Hotel - London). How do i make it search for an exact match?
View Replies!
View Related
VBA To Add Multiple Tables To End Of Word Document
I have an Excel spreadsheet of data that I would like to export into tables in a new word document. The code below (without the marked section) does this, but I can’t figure out how to create a second table after the first one. Eventually I will use a For…Next loop to do this many times, but I’m trying to make the problem smaller by just making a second table. Sub CreateNewWordDoc() ' add a reference to the Word-library Dim wrdApp As Word.Application Dim wrdDoc As Word.Document Dim wrdTable As Word.Table Dim xText Set wrdApp = CreateObject("Word.Application") Set wrdDoc = wrdApp.Documents.Add ' create a new document Set wrdRange = wrdDoc.Range wrdApp.Visible = True.........
View Replies!
View Related
Match Value Of 1 Cell To Multiple Cells And Give Multiple Values
Sheet 2 is the problem. I need to match cells e3:h3 whenver the dates change in in cells c5:c9 and then put there result of cells b5:b9 into the corresponding cells of e5:h9. Basically what I'm saying is that I want to keep a track of all previous pay amounts from each pay period. So when the next period changes the date it also copies the new pay amount to the corresponding date of the previous pay section. I have included a sample.
View Replies!
View Related
If Minimum Below Zero Then Return Minimum
I have had a lot of luck finding what I need from the search areas, and I even found some information on the formula I am trying to build. The problem is I don't understand it and I need some help. First let me set it up for you. (I do not know the formula) If cell L125 is has a value >0.00, I need to locate the smallest value the range of cells C125:F125, I then need to subtract L125 from that number, otherwise enter nothing. This really has me baffled. I tried and I tried but it will not find the smallest value then subtract L125.
View Replies!
View Related
|
TRACKER
