Find Minimum Currency Amount In A Row
I want to find out the minimum $ amount in a row with multiple columns but some columns will also have numbers that cannot be converted to string.
What formula could I use to only find the lowest $ amount?
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Putting In A Minimum Amount In A Cell
I have a row that is a percent of sales with this: =(F4*0.2+G4*0.1)*I4 "I4 will either be 1.0 or 0.5" Now I want to have it so if this equation equals less than 100 with I4 being 1.0 to equal 100 OR if I4 is .5 then it should be 50. I have looked all around and I am no excel wizard so this is troubling me significantly.
View Replies!
View Related
VLookup :: Equal To Or Greater Than The Minimum Amount?
I am revising a spreadsheet to automate some cells and size cable for my job. I am currently using the VLOOKUP command to search a table for the proper ampacity and return a cable size based on the minimum circuit amps. The problem however is the VLOOKUP command searches for a number equal to or less than my circuit amps and returns this cable size. I need it to return a size equal to or greater than the minimum circuit amps. How do I get it to lookup something equal to or greater than the minimum amount?
View Replies!
View Related
Find A Minimum Query
I have a set of worksheets all of which are identical and covered by first:last sheets What I am trying to do is come to up with a minimum figure for cell G30 With the proviso that it is a minimum of 30 as some of the entries in G30 are less than that figure. =MIN(first:last!G30) is not the answer as it gives an answer of zero.
View Replies!
View Related
Find Minimum Value Corresponding To Maximum Value
I am having trouble with large data sets of rents by market: trying to find the peak rent in a time-series, and then look for the next trough rent in time. I tried using the Newsletter 3 techniques which feels like the right direction, but I am not getting the nesting right or some of the parameters in the functions. So, within each time-series I need to find the MAX value (peak rent), wherever that is in the array. Then I need to look to the right of that exact MAX value and find the exact MIN value (trough rent), whereever that is in the array (again, to the right of the MAX value). A small sample of what the data set looks like: 2008 Q22008 Q32008 Q42009 Q12009 Q22009 Q3 Atlanta771773768761749756 Austin770786784779776776 Baltimore947948949950950953 Boston1,6471,6601,6541,6481,6301,613 Chicago998998996985984986
View Replies!
View Related
Find Minimum Value From A Data Group
I have been trying to solve this problem for the past couple of weeks and I have not been able to do so. I have come to do the operation manually, and it really takes a lot of my time, so if you guys could help me, I would really appreciate it. Basically the problem is this: In column "A" I have what I call point numbers for all the data entries. In column "B" I have the station (or location) at which I vary slightly a parameter (represented by column "E") to give me a value shown in column "D" (the "Z" value, as shown in the sheet). So basically you can see that my station 0 has 11 different "E" parameters (0, -1, -2.62, -5, etc) and each of them has a "Z" parameter (390.76, 390.775, etc). What I am trying to do is to come up with a table that shows a summary of the following: A column with each of the stations (0, 20, 40, etc -- notice that I have some weird numbered stations like 411.89). Another column with the "E" parameter corresponding to the lowest (or minimum) "Z" parameter within the station range. And a final column with the minimum "Z" parameter corresponding to its "E" parameter, which is included in the station range You can see in yellow the way I have been doing this and you can see that it would take me so much time to accomplish the task.
View Replies!
View Related
Find Minimum With Criteria - MINIF
I have following problem I have some table - 2 columns - in first is text in second is value. example: A 10 B 5 C 3 A 15 C 8 D 7 A 9 I need to use formula, which shows me minimal value for choosen text. I tried matrix formula like {=min(if(text table=choosen text; second column;0}, but it's not working
View Replies!
View Related
Conditional Count (Find The Minimum Value In The Range)
I am trying, without success, to create a formula that will refer to a column of data and do the following in one step: 1. Find the minimum value in the range, and then 2. From that minimum value, count back “up” the column the number of occurrences, including the minimum value, until a zero is reached. The zero should not be counted. For example, if the values in A1:A6 are 1, 0, 2, -1, -2, 1, the minimum value is -2 and the count would return 3. (i.e. 2, -1 and -2)
View Replies!
View Related
Find Minimum/Maximum Excluding Zeros
I have inherited some legacy templates (Standard, Leave and Exception) which cannot be changed. I need to summarise them (Total) selecting the earliest start and the latest finish. (Sample attached). The templates are 90 columns wide and about fifty lines deep so named ranges isn't practicle (I think). I'm running 2003.
View Replies!
View Related
Find 2 Corresponding Values & Multiple The Minimum
Look in Column A and find the cell that contains "Std A 1" and the cell that contains "Std A 2". Compare the corresponding values in Column B, and multiply the lowest value by .2 I've tried using various methods (find, if cell.value.instr) but I keep getting errors. Can anyone point me in the right direction?
View Replies!
View Related
Find Minimum Value In Column Corresponding To Specific Text
I have a table that contains various aspects of information about customer cases, and I want to replicate a user 'picking up' the case by a simple press of a button. Users have access to only one Country, so I want to be able to search a particular column for the lowest value, but check that the Country for that row matches the user's access. If it doesn't, I then want to find the next lowest value in the column, and this is what's perplexing me??? As mentioned, I want to click a button to trigger this, and therefore want to use VBA code.
View Replies!
View Related
Lookup Functions Find The Address Of The Minimum Value In That Range
I have a range of cells (say A1:D8). I wanna find the address (say $B$2) of the minimum value in that range. This command does it but it only works on a column. it does not accept a range spanning more than one column. =CELL("address",INDEX(B2:B7,MATCH(MIN(B2:B7),B2:B7,0))) this will tell me the address of the minimum value.. but in a column... I need a range of many columns. So I tried converting things to a Table.. but it never worked. basically the MATCH command is my problem. It only accepts single-column-ed ranges.
View Replies!
View Related
VBA Solver: Find Minimum Value Of Cell By Changing X Cells With Constraints
I'm trying to use solver to find the minimum value of a cell by changing 5 separate cells. These cells are subject to a set of constraints that are formulae. On top of that I have a large number of these solve's to run (The spreadsheet is creating randomly distributed data to form a Monte Carlo simulation). Therefore I am referencing the formulas using the ActiveCell, Offset() function. For some reason when running this code none of the values are changed. Also I changed the UserFinish to false so I could see what solver was doing at each solve, It stops at the correct cell (one after the final cell) but without me having to confirm it each time. Here is the ....
View Replies!
View Related
Match Amount And Colour Row
I am trying to match by amount with 1 column to another in a different sheet. If Data in column A in worksheet 1 matches data in column b worksheet 2 then color the entire row in column A worksheet 1 red, I am matching by amount so it(amount in column a) can be within 1 $ of amount in column b worksheet 2 also color item in column b(worsksheet2) red if matches with column a in worksheet 1 both can have a threshold of 1$ difference
View Replies!
View Related
Lookup Maximum & Minimum. Return Corresponding Row
I have searched your forums and thought I had found a sufficient answer but could not get the vba to work. So any help is greatly appreciated. I am trying to determine a max value from a list then put that value in a cell. Next I want to determine how many times and on what day that max value occured. From there take the value and concatenate them adding a "," between them I have attached an example. I would like the values placed in cells F1 and H1 (the other is a min value and when it occurred)
View Replies!
View Related
How To Add Values For Amount That Are Higher Than Same Row In Another Column
I have two columns (let's say column A and C), i would like to add the values in column A only if they are higher than the ones in Column C in the same row... how could i do that? The sheet looks something like this, i would like to add the values in the first column only if they are higher than the ones in the third column and then of course get the sum of them... i would also like to know how many were there in total, but i guess i could do that with a count formula i just need the parameters $ 67,100.00 $ 110,000.00 $ 165,100.00 $ 146,034.00 $ 239,400.00 $ 220,100.00 $ 90,184.69 $ 147,843.75 $ 168,500.00 $ 51,011.25 $ 83,625.00 $ 95,100.00 $ 89,860.32 $ 147,312.00 $ 198,200.00 $ 159,121.36 $ 260,854.69 $ 26,000.00 $ 129,941.44 $ 213,018.75 $ 235,700.00 $ 88,869.38 $ 145,687.50 $ 95,600.00 $ 27,772.54 $ 45,528.75 $ 43,000.00
View Replies!
View Related
Inserting A Total Amount Field In Each Empty Row
to run a macro that enters a new row after each set of currencies (which have been sorted). I now need to enter a total balance cell within this empty row which calculates the total amount for each currency. I need to do this using the SUMIF function below: SUMIF($J$3:$J$300,"L/C",$I$3:$I$300)-SUMIF($J$3:$J$300,"L/D",$I$3:$I$300) the above basically lets me calculate the total but as no - and + signs were input it does this by recognising the 'dr' and 'cr' in the column next to the amount.
View Replies!
View Related
IF Statement- To Remain Blank Until An Amount Is Entered In That Row
Amount Amount Item Total Account $ - No Profit$ 629.50 $ - $ 629.50 No Profit$ 46.29 $ - $ 46.29 No Profit$ 2,333.01 $ 233.30 $ 2,566.31 233.3 $ - No Profit $ - No Profit $ - No Profit $ - No Profit #1 If there is an amount in column B, I want column D to reflect that amount. #2 If there is no amount in column B, I want column D to state the words "No Profit." #3 Already in column B is the formula =C1-A1. I tried =IF(B1=0,"No Profit",B1) but when I copy that formula down the spreadsheet, it inserts "No Profit" into all of column D. I only want "No Profit" to exist when there is a $0 resulting from the formula mentioned in point #3. When there is a blank cell in column D, I want it to remain blank until an amount is entered in that row?
View Replies!
View Related
Sumif; Find The Amount Spent Based A A "tag"
I have a spreadsheet(see attached) that I am needing to find the amount spent based a a "tag" I have created. If you bring up the spreadsheet and look at the dashboard sheet, I am wanting to find the total tag amount based off what is listed in the paychesk sheet. For tests I have used this formula and have put it in B6 on the dashboard sheet. =SUMIF('PayCheck - DEC-09-B'!$F$2:$F$1000,A20,'PayCheck - DEC-09-B'!F$2:$G$1000) But the "bank amount" field on the paycheck sheet is a negative number the value of course coming back is not right. How do I fix this?
View Replies!
View Related
Reference Cell & Add Amount If Positive & Subtract Amount If Negative
Im trying to set up an active running inventory sheet where: (A)the progressive daily sheet cells reference back to the corresponding master sheet cells fluctuating the master values, (B) the same progressive daily sheet cells reference back to a cummulative totals-cell based on whether I added or subtracted inventory. I want to make a copy of the blank "sheet 2" with all of the formulas and move it to the end of the workbook each day and enter new values which will reference back to the master sheet so that I can click on a date sheet and see an individual day's values or click on the master sheet to see the fluctuating inventory on-hand and the cummulative +/- totals of all days combined. I've got a couple hundred individual cells to reference. I've tried and tried but I can't make it work. Heres what I need to do: I need to reference individual cells from "sheet 2,3,etc" back to a corresponding cell in a master sheet. But I need the values in each cell in "sheet 2,3,ETC" to increase or decrease the corresponding cell values in the master sheet. For example: If the value in the master sheet B5 is 200. Then in sheet 2, I enter +50 in B5, I need the master sheet cell B5 to increase by 50 to 250. I also need a way to decrease the cell value in the master sheet B5 if I enter a negative value -50 in sheet 2 B5. I also want to know if I can reference the same cell values entered in "sheet 2,3,etc cell B5" back to totals columns C5 for adding inventory or D5 for subtracting inventory in the master sheet where the master totals columns would reflect cummulative totals added or subtracted. For example: if the value in sheet 2 B5 is +50, then the value in Master sheet C5 would add 50 to a progressive total. But if the value in sheet 2 B5 is -50 then the value in master sheet D5 would add -50 to a progressive total.
View Replies!
View Related
If Minimum Below Zero Then Return Minimum
I have had a lot of luck finding what I need from the search areas, and I even found some information on the formula I am trying to build. The problem is I don't understand it and I need some help. First let me set it up for you. (I do not know the formula) If cell L125 is has a value >0.00, I need to locate the smallest value the range of cells C125:F125, I then need to subtract L125 from that number, otherwise enter nothing. This really has me baffled. I tried and I tried but it will not find the smallest value then subtract L125.
View Replies!
View Related
Find Value On Row & Find Last Used Column Before Found Value
Dim ColNo As Byte Dim LastCol As Byte ColNo = Application.WorksheetFunction.Match("Column find", Range("sheet1!A1:Z1"), 0) LastCol = Range("sheet1!b1").End(xlToRight).Column But the below code errors? Dim ColNo As Byte Dim LastCol As Byte ColNo = Application.WorksheetFunction.Match("Column find", Range("sheet1!A1:Z1"), 0) LastCol = Range(Cells(1, ColNo)).End(xlToRight).Column
View Replies!
View Related
Find Column A Of Same Row Anywhere On Row
I typically record macros that need to copy information like a company name from say sheet 2 and paste in a specific cell in sheet 1. As the cursor can be anywhere on a specific row I usually create a column that holds something like zz.. and then in the macro go Shift + Spacebar to select the line I need to work from then Ctrl + F to find zz.. and that is how I know where the cursor is as a starting point. How is it possible to have the cursor know how to find a specific point i.e. column A from any specific column on that same particular row?
View Replies!
View Related
Find Last Row Containing Value, Then Insert Row After
I am creating a worksheet of contacts and the date and time that I phone them, along with their current "status" in our company. I have created a form and have got it to do the insert of new data that I input, BUT What I would really like is enter a "client number" (which is unique) and have it search my table for any record(s) with that client number, and then show me the last record that matches the client number, (this can all be done from within my form) then If I click on the "insert" command button, I want it to insert a new row after the current row and move my form data in the form into the new row which will include a date and time. So, To summarize.....I need 2 similar subroutines. LOOKUP ----- I need to have my form scan down the data for a match in a particular (pre-sorted) column, stopping at the last line that matches, then display the data or display nothing is there is no match. INSERT ----- I need to have the form scan down the data for a match in a particular (pre-sorted) column, stopping at the last line that matches and then insert a blank row here and move my data into it.
View Replies!
View Related
Currency Sign
I have a very frustrating problem with my business plan i am writing in Excel. every so often it crashes and when I open it again all the £ signs have turned to $ signs and i have to go through and painstakingly change them all. This also happens even if I just close the file carefully and open it up again. I have tried looking in preferences to see if there is a default setting but can't seem to work it out. can anyone help me with this tiresome issue?
View Replies!
View Related
Currency Conversion
I am working on a sheet that logs sales enquiries and quotations. The quotations may be made in either Dollars, Euros or Pounds. However, I want the 'reporting' column to be Pounds. I would appreciate any advice on the simplest way of achieving this. Imagine column A is dollars, column B is Euros and column C is pounds. Most of the time the quotations are done in pounds and the other two columns will be blank. Also, there will only ever be one figure quoted per row. Would it be easier to create a fourth column (D) to consolidate the three separate figures together? We are using fixed exchange rates for the year, so to convert to pounds we will multiply any dollar quotations by 0.5 and any euro quotations will be multiplied by 0.69.
View Replies!
View Related
Format Currency In IF Statement
I am having a problem defining a currency format based on an IF statement. My statement looks like this......... =IF(E22=1,"USD",IF(E22=2,"CAD",IF(E22=3,"EURO","USD"))) What I want is to show $ when USD or CAD is returned and € when EURO is returned.
View Replies!
View Related
Spell A Number (not Currency)
I am using Excel 2003 and have a column within my spreadsheet that, through a formula, inserts a decimal that has formatting to show as a percent. I would like to know who to convert that number to words. I saw spellnumber (and love it!) but don't know how to edit it so that it converts properly.
View Replies!
View Related
Format Textbox For Currency
I need to be able to format a textbox as curancy. Simple enough, right? The problem is that this box is loaded from two sources. The first is automatic using the change event, this works well. The second is to enter directly into the textbox, which requires using the exit event, this also works. The problem comes when I try to use both events. The change event interfers with the direct entry (the format keeps changing the entered value and will not allow the user to finish entering). Private Sub TextBox1_Change() TextBox1.Text = Format(TextBox1.Text, "$ #,##0.00") End Sub Private Sub TextBox1_Exit(ByVal Cancel As MSForms.ReturnBoolean) TextBox1.Text = Format(TextBox1.Text, "$ #,##0.00") End Sub How can this be changed to work for both aut load and direct load?
View Replies!
View Related
Live Currency Rates
I know that Excel has a function to import currnecy rates from the MSN Money web site. But MSN Money doesn't support all currencies. I would like to build an excel sheet where a user can maintain the currency codes and the currency rate is being fetched from the internet. Does anybody have a suggestion from where I could get currency rates into Excel?
View Replies!
View Related
Automatic Currency Conversion
I'm using excel 2000 Is there anyway to format cells such that I can enter values as Euros and they automatically convert to £ eg If I enter 14.60 (Euros) it automatically displays as £10.00, my conversion rate of 1.46 is constant throughout I know I can do the copy paste special divide thing but the above would be a much nicer solution
View Replies!
View Related
Text Representing A Currency Value
I am a complete newbie at Excel, but trying to set up a simple worksheet that I can use to save a lot of time. I have a list of names and each has a paper delivered each day. Can I set it up to treat the name of the paper ie. Tel as a value ie. 0.35? and then have it total etc?
View Replies!
View Related
|
TRACKER
