Find Values From Column In Another & Copy All Occurrences
Aug 16, 2007
I have created (pieced) together a macro to search through a list and paste the results in another worksheet it works fine but i can't get it to loop through the list.
Sub Findall()
Dim y As Long
Dim starta As String
Dim tr As Long, tc As Long
Dim sr As Long, sc As Long
Dim s As Worksheet, t As Worksheet
Dim SourceCell As Range
'Setup
Application. ScreenUpdating = False
Set t = Sheets("Target Sheet")
Set s = Sheets("Search sheet")
Set SourceCell = ActiveCell
Do While IsEmpty(ActiveCell) = False
Counter = 1
'Get last used row in Target Sheet
t.Select..........................
View 6 Replies
ADVERTISEMENT
Feb 25, 2014
I'm using a macro for searching through ~200k rows of a column, finding all the occurrences of a string and copying them to another column.
This is the code (copied from somewhere some time ago, modified as needed) :
[Code] .....
It works great but it takes a little less than 20 seconds to complete the task.
And, since I have to search for multiple strings and the results need to be copied to different rows, I use multiple subs like this in a bigger macro.
The problem is that it got to the point where it takes 3 minutes to execute that bigger macro and I'm trying to find a way to speed things up.
View 5 Replies
View Related
Sep 22, 2007
The code is supposed to find HEQL in column G in BOOKED.XLS ( attached) and then do a series of copy pastes into two other workbooks. For some reason, it is only finding one instance of HEQL and there should be 255.
Sub COF1()
Dim lastrow As Long
Dim x As Long
Windows("COF_OUPUT.xls").Activate
Worksheets("Sheet1"). Range("B:B").NumberFormat = "0.0000000000000000"
Windows("BOOKED.xls").Activate
Range("A65536") = "100"
Range("A65536").Copy
Range("F2").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlDivide, SkipBlanks _
:=False, Transpose:=False
Range("A65536").ClearContents
Range("A1").Select .....................
View 9 Replies
View Related
Feb 3, 2014
I would like to design a macro that can find a value within a cell in a colunm and copy a value in the row then count occurances of that value next time a match in the colunm is found on a different row, but also do this only if the date range in the row is within a specified range. So a multi-critieria search and copy operation.
To explain a little better here is a simplified example of my spread sheet that is in input for the macro.
A
B
C
D
E
1
PART NO.
date in
date out
comp1
comp2[code]......
Column A lists the coponents found on the same row as the seach critria, in this example "12-3".
Column B lists the number of occurances of the components. This search is limited to a date range input by the user.
So what I can see is the components replaced and the amount of times replaced on a specific item over a fixed time.
*It is difficult to describe this problem without showing the macro output, but this is just an example for the purpose of explanation.
I know a bit of VBA programming and initially I started with an input box that asks for the part number and limit dates.
View 2 Replies
View Related
Mar 18, 2013
I've got two columns, one with policy numbers, the other with error codes.
A policy could be in the list more than once, so I'm counting the number of unique policy numbers with the function
=SUM(IF(FREQUENCY(A10:F10000,A10:A10000)>0,1))
I want to count the number of errors that are NOT code 00 or code 21. Because the error codes are saved as text, I'm counting the number of errors with
=SUMPRODUCT((B10:B10000"21")*(B10:B10000"00")*(B10:B10000""))
The problem is that since a policy number could be listed twice, when I count the errors, I might be counting the same policy as an error twice. This means that I could feasibly end up with more errors than I have unique policies, which doesn't work.
What I'd like to do is only count the number of errors that have unique policy numbers. That is, I only want to count an error the first time it is in the list, based off it's policy number. Is that possible?
Here's my sample data: [URL]
View 9 Replies
View Related
Jul 31, 2008
1. For a file moving from one cell to the next, down the column, get the values and seach for the values in file number two.
2. If that value is found, copy a cell from file 1 to a cell of a column on the same row where the value was found on.
3. Do what was done on number two, but with a different column.
this is what i have so far...
Sub replace()
'
' Macro2 created by david
'
' for the entire sheet, moving from one cell to the next down the column, changing rows
' search for the contents in another sheet, and then if that is found,
' copy the row number to a variable, and then
' copy column K from sheet 1 to column N of sheet 2, using the same variable above
' after that same, but L goes to P.
'
'
Windows("file1.xls").Activate
Rng = Selection.Rows.Count
Dim toFind As String
ActiveCell.Offset(0, 0).Select
Application. ScreenUpdating = False
Dim i As Integer
For i = 1 To Rng
Windows("file1.xls").Activate
toFind = Range("A + i")
Windows("file2.xls").Activate
View 7 Replies
View Related
Jun 26, 2009
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
View 3 Replies
View Related
Sep 29, 2007
I've got the code to change all the relevant cells, but cannot get it to stop looping. The data is a converted text to Excel document, so cannot filter on it.
Sub FindIt()
Dim rngFound As Range
Dim n As Range
Dim o As Range
Dim ProjName As String
ProjName = 0
With Selection.Columns("D:D").Activate
Do
Set rngFound = Cells. Find(what:="Do Not Use", after:=ActiveCell, LookIn:=xlValues, _
lookat:=xlPart, searchorder:=xlByColumns, searchdirection:=xlNext, _
MatchCase:=False) .....................
View 9 Replies
View Related
Feb 2, 2010
I have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.
View 9 Replies
View Related
Aug 6, 2007
The following macro does what it is designed to do and needs to be run from a control sheet called "Guide". When I run it from this Guide sheet it stops at around row 53 (out of 1400 rows) on each of the specified sheets in the macro. I have struggled with this problem and have now discovered that the macro will run correctly when run from one of the worksheets specified in the array, e.g. sheet "200 and 100".
Sub Calculateclosingtrades1()
Dim r As Long, c As Integer, LastRow As Long, rcheck As Long
LastRow = Range("J65536").End(xlUp).Row
Dim shtTemp As Worksheet
Dim vntName As Variant
For Each vntName In Array("200 and 100", "100 and 50", "50 and 25", "40 and 20", "20 and 10", "15 and 10", "18 and 9", "200 only", "100 only", "50 only", "40 only", "25 only", "20 only", "15 only").............
View 7 Replies
View Related
Dec 18, 2006
I want to find a string Variables via Find Method . Once this string is found, it will output the offset cell string. For example, in the attached file. i would want to find the string "ggg", once found the code will output the string "xxx"
I tried using the below code but it didn;t seem to work.
If Cells.Find(What:="ggg", After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False).Activate Then
File_array(1,1,1) = Cells.Offset(0, -3)
End If
Msgbox(File_array(1,1,1))
View 6 Replies
View Related
Dec 18, 2013
I'm trying to use a VLOOKUP formula in a blank cell on a separate sheet from my data.
Essentially I'm trying to search the sheet for the word "VIOLATION" and then report back what it says in field 1, which in this case is a date.
=VLOOKUP("VIOLATION",'Master sheet'!1:1048576,1,FALSE)
Right now I just get #N/A.
Eventually I would like to be able to find all occurences of the word VIOLATION and then have the dates all show up in one cell together seperated by commas if that's possible.
View 14 Replies
View Related
Sep 21, 2012
I have a very large range of text; g2:g23000. I am trying to find the number of times ABC shows up in this range and provide a count. The cells contain all bits of information, but i am only looking for ABC.
View 9 Replies
View Related
Jun 7, 2007
i've got two textboxes and a command button on a userform.
Textbox1's value is "A" Textbox2's value is "B".
On commandbutton_click, i'd like to search down column P for textbox1's value.
then offset -5 to column J and insert textbox2's value.
Then Next search for the next textbox1's value and replace the offset again until all values have been replaced.
I've done the searches and not sure exactly how to go about it, it seems so easy but i'm getting tired of looking at this project.
View 8 Replies
View Related
Jul 23, 2014
Ccheck the attached sheet for the explanation.
Book1.xlsx
View 2 Replies
View Related
Mar 6, 2014
I have a workbook with 20 sheets in English Language, but I must to translate in Russian. Translating has done by human translator, so translation is good. I must change phrases and words in english to russian. I can use find/replace function but doing by hand it's very tie consuming. I need VBA or macro who takes values in column A, finds it in entire worksheet and changes it to matching value in column B. Is it possible and how I can do it?
View 1 Replies
View Related
Oct 5, 2013
I am looking for a formula that will find the lowest 5 number group in column A with a total value from column B under $100 in the below table.
1 $28.75
2 $28.00
3 $27.75
4 $24.75
5 $25.50
6 $25.25
7 $25.25
8 $16.50
9 $24.75
10 $26.50
11 $24.50
12 $27.00
13 $26.50
14 $23.50
15 $23.00
16 $19.25
17 $20.75
18 $25.00
19 $20.50
20 $20.50
21 $17.75
22 $22.50
23 $20.50
24 $19.75
25 $20.00
26 $10.75
27 $11.25
28 $5.25
29 $13.00
30 $9.00
View 3 Replies
View Related
Dec 20, 2013
In column A I have a set of Ids that are not unique. In column B I have a set of latlong values for those Ids in column A. In column D I have the unique list of Ids from column A(Removed duplicates from column A & pasted them in column D). In column E, I need the latlong value which has highest frequency for each Id. I tried countif,Frequency and tried mixing them up with various other formulas but it is out of my reach.
View 3 Replies
View Related
Jul 25, 2014
how to count the unique occurrences in column A based on the value in column B. In the example below, I am trying to count the number of unique names in each state (Illinois=1, Colorado=2, New York=2). I would like the formula to count unique occurrences for the entire column A because I will be adding to the list.
..A.............B............C
John......Illinois
John.....Illinois
John.....Colorado
Alex.....Colorado
Alex.....New York
Steve...New York
Steve...New York
View 10 Replies
View Related
Dec 13, 2013
I'm working on a productivity report, on which some employees may produce units for more than one team. The report is organized by team.
I'm already totaling the number of units for each employee which I'm listing in alphabetical order.
But, I would also like to do the following:
a) see the number of occurrence/teams each employee is producing units for.
b) see the row numbers for each occurrence, which would normally be three or less.
c) see the value for each occurrence.
View 9 Replies
View Related
Aug 2, 2006
I am trying to locate specific values in column a of a spreadsheet and I want to be able to move (cut and paste, offset, ???) only those values to column c of the same row. The values I am looking for are text and they all begin <@29>, <@33>, etc. (pagemaker codes). I want to move the cells with the pagemaker codes to column c. and leave the other ones in column a. Does anybody know how to do this using vba? Below is a sample of my column a.
16D
16D
16D
16D
16D
16D
16D
16D
16D
16D.........
View 3 Replies
View Related
Aug 10, 2006
Here's what I need to do. I need to search 3 huge columns from multiple workbooks and copy all values > 0 onto 1 Worksheet in a completely new workbook.
I've done a search and this was the closest I've found to what I need: Find, copy, paste to diffrent sheet
But I couldn't get it to work.
Here's where I am:
For iteration = 1 To numFiles
'blah blah blah get filenames
'filename of new workbook = outputFileName
'worksheet name in new workbook = Cumulative Record Data
'filename of data workbook = dataFileName
'worksheet name in data workbook = Record
The error code I get is Run-time error '1004' - Application defined or object-defined error on line
View 9 Replies
View Related
May 21, 2008
I am building a Macro which can be found underneath. The red code is not working right now and I am looking for alternatives to solve this error but until now I haven't found none.
Basically, I am looking for a correct code to copy files from a sheet to another sheet with a find macro.
Sub vinden()
Dim FindString As String
Dim Rng As Range
FindString = Range("A21")
If Trim(FindString) <> "" Then
With Sheets("Voorraadverloop").Range("A1:IV65536")
View 9 Replies
View Related
Jan 2, 2010
If values in column B are alike or if only one value exist in column B, I would like to copy values from column A over into columns D and all other columns to the right of D,
Before and after examples are below....
View 9 Replies
View Related
Aug 21, 2014
I have 2 worksheets, "Data Dump" and "Target List"
I'm trying to cycle through the "Target List" in column "A", find the same value in column "B" in the "Data Dump" sheet. When I find it, I want to copy several other cells from the found row into cells on the "Target List" (though probably to a different column). Here is the code I'm trying to use. How to correct it to get the result I'm looking for.
[Code] ....
View 4 Replies
View Related
Jul 11, 2014
See attached spreadsheet for reference : MacroHelp.xlsx
I would like the macro to look in column I, and when it finds "TRUE", I'd like it to copy and paste values in all the cells to the left of it.
Reason being is that I want to rid the row of its formula, so the next time someone changes the info (the date the vlookup is searching for) in the tabs those cells are referring to, I will not lose the data it returned previously.
Really all I want is to copy and paste the values in the lowermost row of new information for each plant, but this is the best way I can currently think of.
I've removed the tabs the cells in columns B-G are referring to for sensitivity's sake.
View 2 Replies
View Related
Mar 11, 2014
I've got two question on how to 'find' some values in a specific data file, namely:
- the '52-Week High' of the share price (highest value of the share in that specific year)
- the value of the share price of the last trading day of that specific year (this isn't always 12/31/20..)
Simplified, my data looks as follows:
-In column 'A' I've a created a line of unique edentifiers (company CUSIP + year -> combined column D and E), in my set this column consists of 405 companies over 6 years of daily data -> aprox 460000 rows
-In column 'B' the date is shown -> its daily trading data
-In column 'C' the daily share price is shown
-In column 'D' the company's CUSIP (edentifier for specific company)
-In column 'E' the year
Sheet 1:
1.JPG
My final data set has to look something like this:
-In column 'A' the unique edentifiers (company CUSIP + year)
-In column 'B' the specific year
-In column 'C' the '52-Week High' of the share price (highest value of the share in that specific year) -> red numbers from sheet 1
-In column 'D' the value of the share price of the last trading day of that specific year (this isn't always 12/31/20..) -> green numbers from sheet 1
-> off course all the empty cells in column C and D normally contain the missing values
Sheet 2:
2.JPG
The big question is how do I manage to identify the red and green colored values (and link them to 'sheet 2')?
Regarding to the '52-Week High' (red colored in the sheets) I've already tried with the following functions:
- VLOOKUP: When I use this one I only get the most upper value, for example in the case of '8668102001' this would become '12'
- Combined INDEX/MATCH: The same problem as with VLOOKUP
- IF-function:In this case I get the max value of the entire 'C'-column, in the example of sheet 1: this would be '115'
Regarding the value of the share price of the last trading day of a specific year, I couldn't manage to come up with one.
View 5 Replies
View Related
Aug 3, 2007
I'm trying to do is scan down Column A (1:100 would be more than enough) and looking for 3 values, "INCOMING:", "OUTGOING:" and "WEBALERT". These will always be under Column A but the lines of text between them are different everytime. I'd like to capture the Row values of each of these values and store it in a variable which I will use in a range later. I think the way is to use a loop, but for the life of me I can't figure out how to get it to scan.
View 7 Replies
View Related
May 25, 2014
I realise this is beyond me and wonder if it is possible to list uniqure values in excel and place a count occurrences of each. I have a hugh list of over 400 alpha code i.e ABCD, ABCD, ABCE, BDCE, BDCF ZXYE etc etc. What I'd like to do is pick out all the unique values so I can see what alpha codes are on the list. But then I would also like to count the occurrences of each value/name so I know how many times they appeared on the list.
Col A
ABCD
ABCD
ABCE
BDCE
BDCF
ZXYE
ZXYE
YEZY
CDEF
Col B is where i would like to list all the unquie vaules with a count e.g.
ABCD 2
ABCE 1
BDCE 1
BDCF 1
ZXYE 2
YEZY 1
CDEF 1
View 14 Replies
View Related
Aug 6, 2012
I tried to make something to find a certain value (from a userform) in a range, and then copy the line partially to another sheet. Then go forth to the next found item and do the same. But... I cannot seem to make this loop.
With Sheets("Data input").Range("N5:N1100")
Dim FoundRange As Range
Worksheets("Data input").Activate
[Code].....
View 5 Replies
View Related