Find And Replace COLOR Of Values?

Jul 27, 2013

Is there a way to find specific values and change their colors all at once in xls?

For example, if it looked like:

1 4 5 3 7
4 2 6 3 1
5 9 2 6 4

And if I tell it to change every 4 to red, it'd be like:

1 4 5 3 7
4 2 6 3 1
5 9 2 6 4

Or changing the cells' color would be ok, too.

View 1 Replies


ADVERTISEMENT

Excel 2003 :: Find And Replace Missing The Ability To Replace Values?

Feb 5, 2009

This problem has come up fairly frequently lately, and I'm not sure how to fix it, or if this is by design...but in Excel 2003 I can't seem to do a "Find and Replace" based on the value of a cell. I can do a find, based on cell value, but the moment I change to the replace tab, the "values" and "comments" are missing from the "look in" dropdown.

I've only noticed this when I'm trying to replace on a filtered list, so I'm not sure if that is part of the issue.

Perhaps an alternative way of arriving at the same goal. Basically I have a worksheet with a number of filtered columns. They are filtered just right, using custom filtering, and so I do not want to undo the filters. In some columns I have formulas that are returning #VALUE! errors. I'd like to replace all of these cells with NA.

View 6 Replies View Related

Find/Replace Values With X

Jun 8, 2009

I've got a piece of code I'm stuck on. Basically, I have a range of data and most cells are empty. However, I want to replace all the nonblank cells with an X. I can't quite figure out how to have the code replace something non-specific...

View 3 Replies View Related

Find And Replace Different Values In A Range Of Cells

May 8, 2008

I would like to be able to replace all cell values in a range of 20c by 20r (i.e. 400 cells). In all cases the condition would be the same (find all cells with a value greater than than zero), but then replace with different values.

e.g. Cells with value >0 in range CX119:DQ138 replace with "NT", then cells with value of >0 in range DR119:EK138 replace with "NU"

I thought you could do it with find and replace by just selecting that range of cells but can't see how to set the conditional >0 bit.

View 9 Replies View Related

Find/Replace Asks To Update Values

Aug 16, 2006

I am copying fomulas from one row to the next. Then I am using the Find and Replace tool to replace some key text. This technique has worked 65 times. Now when I try to Replace All a box comes up asking me to Update Values for the text im replacing. Why is this happening?

View 4 Replies View Related

Find, View, And Replace Values With A Form

Feb 24, 2007

I’ve created a form, from which I want to search and replace information into several sheets. Ex: When I select the button ‘find record’ after entering a name, I want it to search through consecutive sheets to find the name and populate all information associated with that name into the form. From there, I would like to be able to edit that particular record’s information in my form and then select another button on my form ‘update record’ to have the information automatically replaced back into wherever it finds that record’s name in the sheets.

View 9 Replies View Related

Find & Replace Values Based On Condition

Aug 21, 2007

I have a simple problem I am trying to find a set a values on a column and what to replace once found with the first 5 most left characters. Example:

in column A I can have text and numbers; the numbers that I want to find are in the following format xy:zw / xy:zw on each case the values can be from 0 to 9 so this is tons of posible combinations, I been trying to use **:** ? **:** but I don't get none. This is what I am doing

Set target = Sheets("Sheet1"). Range("A1:A9000")
For Each cell In target
If cell.Value = "**:** ? **:**" Then cell.Value = "00.00"
Next cell

A example would be 02:47 / 03:15 the next row could have 03:15 / 04:09
and so on however I could have text in some rows. In reality I would like to find and replace the cell.value with the Left 5 characters if the cell contains ANY value maching that format. Text in that column will never have that format combination

View 4 Replies View Related

Find Values On One Tab And Replace Data From Adjacent Cell

Apr 3, 2014

I have one sheet in my workbook called 'mapping' which has a list of codes on it, the length of which will vary on a periodic basis.

I have another fairly large sheet on the workbook called 'data' (around 2000 rows) that will also vary in size. I want to do a search on the data tab for each code that is contained on column 4 of the mapping tab and if the code is found, enters the corresponding value from column 1 of the mapping tab to the cell 6 columns to the left of where the code was found on the data tab (cols H and B in this case).

The issue I have is the codes maybe contained more than once on the data tab so I need the find/replace command to search the whole of the data tab and perform the task each time.

View 2 Replies View Related

Find And Replace Multiple Values Within Individual Cells?

Mar 13, 2014

So I have a list of organizations in Column A, with multiple names (anywhere from 0 to 50 names) for each org. in Column B.

Org
Names
Company A
Brown, Jones, Smith, West

[Code]...

I want to do a find and replace for all of Column B, where all the names are replaced with their respective color values. If possible, I'd like this to all happen with the individual cells (so for example, B3 might go from "Brown, Jones, Smith" to "Red, Red, Blue").

If that's not possible, I could divide all the names into individual cells and then find and replace.

View 3 Replies View Related

Find And Replace Values In Closed Workbooks From A Folder

Jul 15, 2009

Is there a way to find and replace the values from a closed workbooks of a folder.
say i have some 15 files in a folder c:/test

I want to find all "Ltd" and replaceAll with Limited
and find all "Co" and replaceAll with "Company" etc (some 20 different values to be found and to be replaced) if this is in a single file i can easily record a macro to this job, i am stuck for doing 15 files at one shot.

View 9 Replies View Related

Excel 2013 :: Find And Replace Values In Selected Range?

Jul 13, 2014

I have Excel 2013. I would like to use the code below but I need it to let me select the range instead of specifying it in the code, then pop up a form into which I can fill in what I want it to search and what I need it replaced with.

[Code] ......

View 3 Replies View Related

Macro To Find And Replace Values Across Multiple Sheets In Same Workbook?

May 27, 2014

I have an excel workbook with 60 sheets (each contain data in the same categories and in the same column locations, just different information on each sheet). What would the VBA code look like if I wanted to manually enter the find and replace values and perform the function (find and replace) across multiple sheets in the workbook?

View 5 Replies View Related

Find And Replace To Not Replace Characters Found As Wildcards?

Jul 2, 2013

I recently became owner of a spreadsheet with some issues, and I am trying to make it useful. Each row has a URL of a blog post, and I want to extract the date from it (which is present in each URL) while getting rid of the rest of the URL. I was able to get rid of everything up to the year (which comes first), but then the URL continues, for example, 2013/05/16/the-rest-of-the-url/ and I would like to just have 2013/05/16 remain.

I am trying to use find and replace with the find box reading 2013/??/??/*/ and replacing it with 2013/??/?? which effectively erases everything else in the url, but leaves ?? instead of the numbers. Is there any way to have it so that it keeps whatever was in the original box?

View 4 Replies View Related

Doing Find / Replace Not Working If Replace Text Is Too Large

Feb 5, 2014

[Code] .....

Trying to repeat a 550 or so character statement with a find/replace however I am getting type mismatch errors. When I use a smaller message in the "replace" it works.

I need it to post a message exactly as long as what I have in there. How do I get it to work?

View 6 Replies View Related

Catching Errors When Using The Find / Replace Function / Replace All

Apr 20, 2006

Need assistance with the code for catching errors when using the find / replace function in excel? In particular, I am trying to write code to break to an error message when the value or string searched for isn't found in the find / replace. At the minute I have just copied the standard code using a macro and all this does is return a message box saying X entries replaced.

View 3 Replies View Related

Find, Replace With And Then Replace Adjacent Cell

Mar 18, 2009

I am trying to create a macro where it finds a a certain word in a column for example C. What i want it to do is find anything that says FWD_EUR and then replace that cell (e.g C2) with CASH_EUR_FWD and after it has done that it replaces the adjacent cell (e.g. D2) with EUR_FWD. I then want this to do the same with FWD_USD to CASH_USD_FWD and adjacent cell to USD_FWD.

View 2 Replies View Related

Find / Replace From Column A Values To Column B Values VBA

Mar 6, 2014

I have a workbook with 20 sheets in English Language, but I must to translate in Russian. Translating has done by human translator, so translation is good. I must change phrases and words in english to russian. I can use find/replace function but doing by hand it's very tie consuming. I need VBA or macro who takes values in column A, finds it in entire worksheet and changes it to matching value in column B. Is it possible and how I can do it?

View 1 Replies View Related

Search And Replace: Loop To Look Up Xxx And Replace It With The Values Consecutively In Row C

Jun 15, 2006

I have values in row A and I have values in row C. I want to create a loop to look up xxx and replace it with the values consecutively in row C. Look at example for a better Idea. I found a way to find and replace, but I not sure how to use it with qoutes. I was thinking maybe I dont even need row A and just supply a list and excel could have the chunk of data in the code itself.

View 2 Replies View Related

Find Replace :: Find All Occurences Of And Or AND And Replace With And

Oct 26, 2009

Range B3:B1000 is text strings. Column C2:C50 is a list of words that I would like to "Find" in Column B and replace with it's lowercase values unless they start off the string.

Example

Find all occurences of And or AND and replace with and
Find all occurences of With or WITH and replace with with.
Find all occurences of Or or OR and replace with or

View 9 Replies View Related

Fill Values And Replace Told Values By Vba Code Depends Upon 2 Columns

Mar 26, 2014

I have set of data in multiple range ,need to fill the and replace the old values depends upon two column values (AH & AL)

IF Active Calls is "TATA" In AH:AH, and IF Action Onwer Col is "Blank",in AL:AL
Then Fill the Blank cells by Values "SVC" in the col Action Owner,Then Replace Old values by "Updates Awaited" in Status Col(AM:AM)

Find the attachment & basic code take this code for this task

[Code] ....

toggle-2.xlsb‎

View 5 Replies View Related

Replace Values In Range Of Cells With Varying Values?

Mar 14, 2013

I am trying to replace a range of cells with certain values but I can not figure it out. I'm almost there I think but don't know how to get the varying values I'm looking for. So I have a column (AJ in this instance) that has a bunch of "xx" values at different spots within the column. I want to replace those xx values with numbers 01 through 36. What I have below gets me just about there but it replaces every xx value with 01. How do I get it to go 01 on the first one, 02 on the second one, etc?

/code
Dim cell As Range
For Each cell In Range("AJ1", Cells(Rows.Count, "AJ").End(xlUp))
If cell.Value = "xx" Then _
cell.Value = "01"
Next cell
/code

View 3 Replies View Related

Find And Replace ....

Jun 9, 2009

I was wondering if it is possible to do this unique find and replace that is explained below.

I have many columns with data from our database. I have one column that has my html layout in it. I want to find within the html text data and replace it with data from another column for that row.

Example: We have [[manufacturer]] in the html area that we want to replace with data from our column called Manufacturer. So, it will replace the text in the html named [[Manufacturer]] with that rows Manufacturer data we have.

Is that possible to do?

View 14 Replies View Related

Find / Replace Using VBA

Oct 31, 2011

I have around 10 names which I want to replace with their code names. For Example, "Alan Richard" needs to be replaced with AR001. Problem is I don't know cell range and this name might appear more than once in the data.

View 4 Replies View Related

Find & Replace In VBA

Nov 15, 2006

I am trying to find and replace #N/A from a formula (link to another sheet) with nothing in the cell, using VBA.

Using this code it will do the first "find"
Cells.Find(What:="#N/A", After:=ActiveCell, LookIn:=xlValues, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
True, SearchFormat:=False).Activate
ActiveCell.ClearContents
Trying this
Cells.Replace What:="#N/A", Replacement:=" ", LookIn:=xlValues, LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=True, SearchFormat:=True, _
ReplaceFormat:=False
LookIn:= is highlighted and I get a "named argument not found"
Don't understand that because LookIn:=xlValues works in the first code.

I did try and place After:=ActiveCell,before this, but that does not work. I Get the same error.

I have more then one cell with the #N/A which I would like to get rid of. I want this to work only on this one sheet. The other sheet that the formula is pulling from does have #N/A, and that is okay, I need it there.

View 9 Replies View Related

Find And Replace ..?

Mar 2, 2007

I have a list of sales associates that are assigned numbers. For example, John Doe is 1022. The data I have to work with only shows his number 1022 but for my reports management wants the name John Doe. I have about 60 sales associates and have a VB code that 'finds and replaces'. The code is huge. It has slowly grown out of hand, with more sales associates added daily. I also have 22 sheets in one workbook with specific columns to search for the numbers to replace with the names.

This is what I would like to do. Have a sheet named associates, as more associates are added I would just have to add their name and number. Have two columns with headers column A - Associates column B Associate #. Name ranges for the two columns and write a code that says look in the sheet associate, at named range 'numbertoname' and if the current sheet 'total sales' I am in has the number 1022 in column C replace it with the name John Doe. It seems like it should be easy but.......I have tried and tried today.

View 9 Replies View Related

Find And Replace ‘*’

Sep 15, 2006

I am facing a strange problem with Find and Replace function of Excel. I converted a PDF document into a Word document. I copied the tables in the Word document to an Excel document. As the data had many ‘*’ characters, which I did not want, I used Find and Replace function to get rid of them. However, to my surprise, two things were happening.

1.When I tried to replace ‘*’ in a cell with ‘ Construction revenue ********************** ’, it was deleting all the contents of the cell.
2.When I tried to find all the cells with ‘*’ , it was selecting cells even without ‘*’

I tried various things like changing the format, pasting only values..etc, but nothing worked. Finally I had to use the Replace function of VBA to do the task. For further analysis I am attaching my Excel file with that data.

View 3 Replies View Related

Find Replace Not Working?

May 15, 2014

In the attached file I want to do a Find/Replace for 599 --> 599.0 and 428 --> 428.0. When I do a F/R for each it tells me it has made 3 and 5 replacements respectively but the data is not changed?

View 7 Replies View Related

Find And Replace With Criteria?

Jan 6, 2014

how to find and replace to prefix and suffix string/text, see this below :

JACK MANHOLD ----------- JACK
SISCA JACK HOLAND ------- JACK
ANDREW JACK ------------- JACK

View 14 Replies View Related

Using Wildcards In Find & Replace

Aug 16, 2007

I'm doing a search simular to this

=VLOOKUP(D*,Sheet2!A*:B*,2,FALSE)

and I want it replaced with this

=VLOOKUP(D3,Sheet2!A1:B42,2,FALSE)

HOWEVER when I do the find & replace I don't want it to change whatever the current value is to D3 I want it to stay as whatever it was already....so how do I exempt the "D" value from the search?

View 13 Replies View Related

Find And Replace Not Working ...

Sep 11, 2008

I'm using Excel 2007 and trying to replace about 2000 commas with full stops. I want to use find and replace but keep getting a message saying that Excel cannot find the data I'm searching for.

Excel help suggests I haven't clicked on "find" before clicking "replace" but I did.
I've tried highlighting the column in which I want to make the replacements, but same message.

Also tried highlighting nothing, same message.

Tried copying and pasting the whole thing into a new file, but same message.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved