I have a text string "Area" which relates to an entry in a named range "AreaCodes", which is stored on a non-active sheet. How can I activate the cell contaning the string other than using this, recorded, code
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
I'm a bit uncertain if my named range has turned out the way i want it to.. Is their anyway of finding the dimensions of my namned range, i.e. # of rows and columns?
In VBA, does anyone know how I can find the beginning and end of a named range?
eg: Range "CellsToTotal" is A1:A10, if I know only the name of the range, can I retrieve both A1 and A10 values?
What I have done is named a range on the fly as so (where vStartCellCoordinates and vEndCellCoordinates are both variables holding 2 ints):
ActiveWorkbook.Names.Add Name:="CellsToTotal", RefersTo:="=" & Cells(vStartCellCoordinates(1), vEndCellCoordinates(2)).Address What i'd like to do is then set a third arbitrary cell to sum up the range as a formula (note the following is a wierd adapted pseudocode thing):
Cells(iRow, iCol).Value = "=sum(" & start(Range("CellsToTotal").Address(0, 0) & ":" & end(Range("CellsToTotal").Address(0, 0) & ")" How can I make this work?
Is it possible to use Match to find a value within a Named range and then, based on that value, use Match and Index again to find a value two columns across?
I have a list of clients in Column A, with 10 cells between each. In Column B, I have a list of currencies (the same currencies next to each client) and in Column C the rate this client pays for this currency. I want to reference these rates from an external workbook. Is there any way to use Match to locate the client name, then use Index/Match to locate the rate for a particular currency, somehow telling Excel where to look the second time?
I have four named ranges (Segment, Keyword, Impressions and Dropdown) and I would like to create a formula-based ranking of keywords by impressions and clicks. Using the following array formula, I am able to return the correct values for impressions or clicks:
{=LARGE(IF(Segment=DropDown,Impressions),$H7)} where $H7 is the number ranking 1, 2, 3 etc.
My question is what array formula could be used to find which row in the array returned that number and then pulls the data from the same row in the other named ranges?
Essentially find row of {=LARGE(IF(Segment=DropDown,Impressions),$H7)} but return Keyword and Clicks on that row.
Other Notes: I cannot use pivot tables and some values might be the same which would make Vlookups not accurate for duplicate values.
Link to an example document to clarify this. [URL] .......
No matter what changes in this string, these four digits (9, 10, 11 & 12) will always be in the same position.
What I would like to do is (I think) use the FIND funtion and then perform a VLOOKUP against an already defined table/range which identifies the actual location in the destination cell. Will FIND be the easiest for me to do this our should I use something else?
The what to interpret characters 9-12 (using 3600820040030500050005271000 as an example):
3600820040030500050005271000
4003 is the location information which consistantly breaks down:
4 = Region Name 003 = Office / City (001 thru 024)
There are 7 possible regions with 24 possible Offices/Cities. I want to believe I can make this lookup happen using VLOOKUP tables that break them down - but I just don't have the brainpower to identify those 4 digits and then break them out for a look up.
Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
I'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.
Picture2.jpg
Using the following code when updating just one criteria with several charts
VB: Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then [valMeasurePicked] = ActiveCell.Value [code].....
which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.
if I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
I am having trouble getting my IF statement to test if the cell contains the text "sale" return "X" if not "Y". I need it to search through the text string in that cell and find a certain word, and if it finds that word, retrn a value. I am really having difficulty with is what symbol or function do I use for the logical test? (i.e. =, <>, MATCH, INDEX?)
I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData() Dim counter As Integer counter = Sheets("Imported Data").Range("Counter")
I am trying to do a sort of index match thing using VBA. What I am attempting to do is to use the prefix of a long number and try to find that exact prefix in a string array, and output that string array value. So this is what I have so far as a test:
[Code].....
So I can match the text exactly so if I put PREFIXB in cell A1 in this example, i will get the msg box saying "YES", but if I make it PREFIXB1231k4j3jj1kj32cj, it will display "NO". I want to get it so that PREFIXB will be displayed in the cell that I put the formula in. So if A1 = "PREFIX1AAA100CF" and cell B1 = "=ABC(A1)", cell B1 will display "PREFIX1AAA".
Now the thing is that these prefixes can have different lengths, but will never encompass the exact prefix of another. So if I had a prefix of: PRE1AB, I won't have a prefix of PRE1A.
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
I have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A Row2 56 Row3 44 Row4 65
AllData is a named range that refers to the range A2:A65536 AllData_UsedRange refers to A2:A4 by way of this formula. =OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work... ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
I am trying to create a graph for a range of data that updates monthly (adding an extra month each time). I wanted the graph source data to update automatically each time the data is refreshed so used an OFFSET formula to identify a named range. I then point the graph to the named range as the source data.
When I enter the range as the source data the graph picks it up. However, when I re-enter the source data option on the graph it has converted the named range into a cell written range (ie. replaces "=QUALITY" with "='Front page'!$B$7:$J$10" - which therefore will not update when the range increases.
I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
My searches have not produced anything that I could apply to this situation.
I'm trying to write VBA that would:
1. Search a Workbook for Dynamic Ranges.
2. When a Dynamic Range is found the code would:
A. Determine the current coordinates for the range. B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"
3. Save Changes.
4. Close File.
My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.
I am working on data that needs to be cleansed of the symbols i.e. *&/- etc so I am hoping that I can automate this as their are over 30,000 rows of data and takes time to go through each find and replace.
I have a named range, called SubjectNamesPastoral on a worksheet called Worksheets("Group to Teacher")
I can't assign the named range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable in vba.
the first two lines of code work fine, the msgbox shows "E100:E105", happy days!
However when I try to assign the same range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable, the debugger runs past the 'Set' line without error, but throws 'error 91' at the second msgbox.
