Find Text In Workbook And Then Deleting Range Of Cells Above It
Jan 29, 2014
I want to create a macro that will find a text string called "Season Average" in the entire workbook and delete a range of cells above it 4 cells longs starting right above the text and then going left.
Example is if "Season Average" is in cell D11, than I want the cells D10, C10, B10 & A10 Deleted and the cells to shift up
This happens throughout the entire workbook and multiple times on each work sheet in different spots not consistently same cells.
View 9 Replies
ADVERTISEMENT
Jun 9, 2006
I'm trying to find the max value in range of cells that hold text equivalents?
e.g. cells contain 001, 002, 003, 004.
therefore max value is 004
Dim lMaxVal As Long
lMaxVal = Application.WorksheetFunction.Max(Val(rangeHazRoomNum))
View 3 Replies
View Related
Dec 8, 2011
I'm developing a fixture list (involving 26,000 individual fixtures) I'm trying to come up with a Macro which will enable me to delete part of each cell containing the two team reference numbers and the match number, and paste it in another column. I'd like to do this for all 26,000 fixtures.
In case you didn't understand that too well. For example, with the cell value of '1v2-54', I'd like to get rid of the '-54' and put it in another cell.
But the key thing is, using this principle, I'd like all 26,000 fixtures to be done this way. Obviously I'm not going to do it by hand.
As you can see from the screenshot, the pattern of how the column goes:
View 2 Replies
View Related
Jun 12, 2009
I need to have my macro select a certain range of cells with a specific product code and delete them. What would be the code for it (product code 107). Here is what i have so far:
Workbooks.Open Filename:=fNameAndPath, UpdateLinks:=1
ActiveWorkbook.Save
ActiveWorkbook.SaveAs Filename:=myStrPath1 & myStrPath2 & myFile3 & myExt, FileFormat:=xlNormal, CreateBackup:=False
Windows(myFile3).Activate
Cells.Select.Range ("A78:K153")
Selection.Delete
Cells.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
Range("A1").Select
ActiveWorkbook.Save
ActiveWorkbook.SaveAs Filename:=myStrPath1 & myStrPath4 & myFile4 & myExt2, FileFormat:=xlCSV, CreateBackup:=False
View 9 Replies
View Related
Jun 11, 2014
I have a sheet with thousands of rows and 45 columns and I need to delete a range of cells (G:Y) if the cell in column V = the cell in column X, and I need to do this by row. I think an if/then statement would work.
View 4 Replies
View Related
Jun 2, 2014
I have a target range for a worksheet change. Then when finished I highlight the data and press 'delete' I get an error within the code.
View 2 Replies
View Related
Aug 1, 2013
I am attempting to make a range of cells' data be deleted if a cell outside of that range that had a name in it is no longer there. So if I have a list of names in cells A1:A6 and a range of data in cells D10:E20 that corresponds to a name in cell A2. If the name in A2 is deleted I would want the data in D10:E20 to be deleted.
View 9 Replies
View Related
Jul 28, 2009
I'm running this code to find a text in a workbook but i need to know if this code find nothing .
View 12 Replies
View Related
Mar 16, 2013
I am trying to simplify process for the users of a workbook. This workbook has about 20 tabs and I would like the users to manually paste a value in C1 of sheet1 and have a macro button that will find that value in the whole workbook.
View 3 Replies
View Related
Feb 21, 2007
I want create a macro which will find a text "9:55:00" in the cell of column A and if found copy that entire row in a new workbook which i have opened. the text "9:55:00" will be there every workbook i will open. Once the row is copied in the new workbook, when i again do the second find the row must be copied below the first find in the new workbook.
View 4 Replies
View Related
Feb 11, 2010
I m not able to use the standard Excel Paste Special function when I copied a range of cells in another Excel workbook opened in a separate instance of Excel. Instead, Paste Special thinks that I have copied some non-Excel objects and gave me the Paste As options. This is not the case if I open both workbook within the same instance of Excel. Could you share with us if there is a trick to trigger the normal Paste Special options in such situations (without having to invoke Macro procedures)?
View 2 Replies
View Related
Apr 10, 2008
I want to search for a word in column A and when I find it I want to copy it to column B.
Column A is a description that can be 6 or 7 words long. Column B is a single word.
Example:
Col A
Engine Kit, V-8, 306, forged.
I need to copy the word Kit to column B.
View 9 Replies
View Related
Aug 27, 2006
I'm trying to create an Excel function that allows me to choose a row from a table based on text found within entered data. For example, say I have a table called "categories" that looks like this:
Categories
cat
dog
mouse
Now in a different section of the workbook, I want to be able to enter an arbitrary number of sentences, one per row, that look something like:
"It's raining cats."
"The mouse is hiding."....................
View 3 Replies
View Related
Aug 6, 2013
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
View 9 Replies
View Related
Aug 12, 2011
I've scoured the internet for this answer and have not found a formula that works.
I have a list of domain names/URLs in column A of workbook 1:
jhjh.com
hajfh.co.nz
123.123.12.12
I have a list of domain name extensions in workbook #2:
.com
.co.nz
.net
I want to determine if the cells in column A workbook one contain any of the strings in workbook 2 - note that I need to look at the string, not the entire cell in workbook one. If there is a match, true, if not, false for that cell within workbook one.
It's sort of a reverse array lookup with text. It seems that cross workbook and text is what causes the challenge.
View 9 Replies
View Related
Oct 10, 2009
I'm trying to make a by month spreadsheet that has all twelve month ranges starting in for a3. in a3 it would have the start date and in a4 it would have the end date. I'm trying to locate all of the dates between those two dates and pull in the profit ammounts from another sheet, the results would be in row 5. I would also like to pull in the loss amounts and have them in row 6. All corresponding with the date range in rows 3 and 4.
View 9 Replies
View Related
Oct 4, 2012
I have the following formula that is supposed to grab a value from C2 and check for that value in a range of cells and if it matches it is supposed to display the corresponding value in another range of cells. What am I missing??
=IF(C2='Google Doc'!$B1122:$B1266,"'Google Doc!K1122:K1266'","Not OK")
View 9 Replies
View Related
Feb 1, 2010
I'm working on a project for my company. We make plastic tanks and for quality control we want to start recording the thickness of the tanks in different areas/zones of each tank.
Attached to this message is an Excel sheet that I've been working on. From "Sheet 1", it records inputted thicknesses into WorkSheet "1098". On the top of "1098", it shows all of the recordings, and just below that are the "10 Most Recent Entries".
Right below the "10 Most Recent Entries", there are formulas to calculate the Min and Max Values. Whenever a new entry is recorded, the selected cells for the Min and Max formulas change. Is there a way to force the cells to always stay the same?
View 3 Replies
View Related
Feb 6, 2014
I have the following;
Code:
=IF(COUNTIF(AG:AM,K12),"Yes","No")
How can I get that to look at the range and when it finds similar items that it gives a Yes. For instance Cell K12 may have "Tractor" and it may have "Tractor Trailer" so I need it to say Yes if it sees any combination using Tractor (or the contents in column K). I tried to use left(K12,4) but that did not seem to work.
View 2 Replies
View Related
Dec 29, 2006
I want to search a text in a range...and not in a particular cell...
For example,
Col A-------------------------------Col B
2306-------------------------------JAHSN-AJS-2398-2US9
2332-------------------------------AHSNAHSB 2346 09
AND SO ONNNNNN
Suppose I want to search if 2306 is available in col B by any chance?
View 3 Replies
View Related
Jun 19, 2014
I have data that is on a separate .txt file (the source file) that resembles this;
A
B
C
D
E
F
1
Case
District
Pct
Division
Level1
Level2
2
305035
0
20
72
[Code] ..........
Using VBA from within the destination workbook, I would like to use an input box that allows the user to request/specify what numerical number (0 through 55) in Column B of the txt file (the source file) will be used to determine what data to copy to the destination file. The cells to copy to the destination file would be from Column A through Column G of the source file onto Sheet1, E2 of the destination file.
Column B of the Source file will only contain numbers. However there will be numerous identical numbers in Column B. All of which will need to be copied onto the destination workbook.
From the sample above, if the user were to enter '15' in the input box, the desired result on the destination sheet beginning at E2 would look like this;
E
F
G
H
I
J
1
Case
District
Pct
Division
Level1
Level2
2
502046
15
1
3
[Code] ............
View 9 Replies
View Related
Jul 21, 2014
Type/Unit Sold
Car-A/20
Bike-A/5
Bike-B/20
Car-B/50
Car-C/100
Bike-C/100
I need a formula if it's Car then sum it up to 170 and for Bike is 125.
View 9 Replies
View Related
Sep 27, 2006
I try to write the function that gets some "ref" and returns appropriate item.
For example: if I give to function "C3", it returns "AAA"
if I give to function "R18", it returns "BBB" (cause it between R15 to R26)
if I give to function "R9", it returns "BBB" also.
View 9 Replies
View Related
May 15, 2007
I have some EXCEL files, titled as "AAA", "BBB", "CCC", so on... Calculated values are placed in Column Z for each file. In order for me to export the files to another software, I would need to create another new EXCEL file (I call it MASS) and place all the calculated values in that new file. In that new file, the titles have to be on Column A and the calculated values on Column B.
For example, File "AAA" has 120 calculated values. In MASS, the word "AAA" has to appear on Column A a number of 120 times and the 120 calculated values are then placed on Column B. Each value must correspond to the word "AAA". The same procedure goes for "BBB", in which the word "BBB" is placed on Column A after the end of "AAA". What I want to achieve is by using a macro that will look up the title of the Active Worksheet and then scan Column A in MASS. If the title matches whatever is in Column A, then the macro will paste the corresponding calculated values onto Column B automatically.
For example, for file "GGG", the macro will look up the word "GGG", scan through Column A in MASS for the start of the word "GGG" and paste the calculated values at the start of Column B. Could I have an idea of how might the macro looks like?
View 9 Replies
View Related
Jun 17, 2008
I am having trouble with the Find method in Excel VBA.
This is the piece of code that I have written:
Sub NCMVariables()
Dim x As Integer
Dim c As Object
Sheets("Data").Select
With Worksheets("Data"). Range("A1:A60000")
Set c = .Find("USD", LookIn:=xlValues)
If Not c Is Nothing Then
View 3 Replies
View Related
Aug 5, 2013
I'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
View 2 Replies
View Related
Aug 16, 2007
The word " Total" can exist in any row only in Column A. How can I find the cells that are in the same row as the word "Total" are in. Also, the word "Total" can exist more than once in Column A.
View 5 Replies
View Related
Mar 6, 2008
Got a question regarding the Range. Find function. I'm using it to search within the customer workbook, but while testing, I found something weird. Lemme give you an example:
This is my search code (please note, French version of Excel 2007, thus Feuil1 = Sheet1, and last row is 1048576) :
strName = Feuil1.Range("D13")
OpenFile ("Clients")
With Worksheets(1).Range("A1:A1048576")
Set SRange = .Find(strName, LookIn:=xlValues)
If Not SRange Is Nothing Then
CloseFile ("Clients")
FillCustomerInfo (strName)
Application. ScreenUpdating = True
Exit Sub
Else
Feuil1.Range("D15:D17") = " "
AjoutClient.Show
End If
End With.......................
View 6 Replies
View Related
Jan 6, 2014
Need formula to find a specific account no. from a range of text and return that account's value as a usable numeric.
Account number:012345678 XZ
Account value as of 12/31/2013:$12,345,56
Account number:987654321
Account value as of 12/31/2013:$876,543.21
View 12 Replies
View Related
Nov 29, 2007
I'm working on a macro that requires me to loop through a column and stop every time the cell has underlined text. My code currently looks like this:
For i = 1 To 5
If cells(i,1).font.underline = xlunderlinestylesingle Then
strUnderlineText = Cells(i,1)
End If
Next i
View 3 Replies
View Related
