I want create a macro which will find a text "9:55:00" in the cell of column A and if found copy that entire row in a new workbook which i have opened. the text "9:55:00" will be there every workbook i will open. Once the row is copied in the new workbook, when i again do the second find the row must be copied below the first find in the new workbook.
View 4 RepliesWhat I'm looking for is to copy information from certain cells, G9 G11 G13 G16 G19 G21 in book1 into A B C D F and K into book2, like so G9 = A G11 = B G13 = C G16 = D G19 = F G21 = K
I tried running the macro and copying and pasting it in but what i need it to do is to find the next empty row down and enter new data rather than copy over the old.
The second, although really before copying is I'd like to the data in G11 to search collumn B and find if there are any existing entries containing that data and, if so, maybe pop up a window that says "Entry alreadyexists" or even loop it round and enter it in G11 saying the same thing and doesn't copy anything, but if the data doesn't exist in G11 then data in all cells on book1 is copiesd as aforementioned
I'm running this code to find a text in a workbook but i need to know if this code find nothing .
View 12 Replies View RelatedI am trying to find text in one workbook and paste it into another. I've tried a Vlookup, and now I'm trying a Find, and neither is working.
This is what I have so far...
Sub FindAddress()
Dim GCell As Range
Dim Page$, Txt$, MyPath$, MyWB$, MySheet$
Txt = "N.A.V."
MyPath = "T:01862a7R228 Reports2039067"
[Code] ...........
Here's what I need to do. I need to search 3 huge columns from multiple workbooks and copy all values > 0 onto 1 Worksheet in a completely new workbook.
I've done a search and this was the closest I've found to what I need: Find, copy, paste to diffrent sheet
But I couldn't get it to work.
Here's where I am:
For iteration = 1 To numFiles
'blah blah blah get filenames
'filename of new workbook = outputFileName
'worksheet name in new workbook = Cumulative Record Data
'filename of data workbook = dataFileName
'worksheet name in data workbook = Record
The error code I get is Run-time error '1004' - Application defined or object-defined error on line
Here is some sample code I found on the internet similar to mine:
Windows("Waterfall 1.xls").Activate
Cells. Find(What:="accounts", After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Activate
Windows("test Schedule.xls").Activate
ActiveCell.Offset(0, 0).Range("A1").Select
Application.CutCopyMode = False
ActiveCell.Offset(0, 1).Range("A1:G1").Select
Selection.Copy
Windows("Waterfall 1.xls").Activate
ActiveCell.Offset(0, 2).Range("A1:G1").Select
ActiveSheet.paste
Windows("test Schedule.xls").Activate
ActiveCell.Select
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "4"
ActiveCell.Offset(0, -1).Range("A1").Selectp.
I now understand that there's a way to remove the activate statements, while still selecting that document to work with, and therefore greatly increasing the speed.
What I have is a collection of about 500 .xls files that I want to import into a single worksheet in a new workbook, but I only want to bring in specific cells from the source sheets which are unfortunately not always in the same row numbers.
I have found this link on loops:
http://www.ozgrid.com/VBA/loop-through.htm
Which looks like it will do the work of digging through each workbook in a certain folder, but do I need to further specify a sheet within the workbook once it's opened in that loop code? Even if there's only one sheet in each source workbook? The sheets are named differently in each workbook, so that may be a problem.
Now the really complicated bit (I think) is the conditional stuff. Each source sheet is three columns (A, B and C) and I want to import the string (some will be numbers, some will be text) from the C column to a single row of the destination sheet, but only if the string in the source's B column matches what I'm looking for. There will actually be a few dozen of these conditional searches based on different strings from the B column, but if someone could just show me how to do it for a single string, I can expand that to all the other searches I need to do.
Let's say the search term is 'Application ID,' how do I look through the source worksheet for that string in column B and if I find it bring the string from column C on the same row into my destination sheet?
I have a "data" workbook with various data in columns. Need to create "master" workbook that generates 3 different reports. Need "master" to contain macros that searches "data" and generates report based on search.
View 7 Replies View RelatedI am trying to simplify process for the users of a workbook. This workbook has about 20 tabs and I would like the users to manually paste a value in C1 of sheet1 and have a macro button that will find that value in the whole workbook.
View 3 Replies View RelatedI want to create a macro that will find a text string called "Season Average" in the entire workbook and delete a range of cells above it 4 cells longs starting right above the text and then going left.
Example is if "Season Average" is in cell D11, than I want the cells D10, C10, B10 & A10 Deleted and the cells to shift up
This happens throughout the entire workbook and multiple times on each work sheet in different spots not consistently same cells.
I've scoured the internet for this answer and have not found a formula that works.
I have a list of domain names/URLs in column A of workbook 1:
jhjh.com
hajfh.co.nz
123.123.12.12
I have a list of domain name extensions in workbook #2:
.com
.co.nz
.net
I want to determine if the cells in column A workbook one contain any of the strings in workbook 2 - note that I need to look at the string, not the entire cell in workbook one. If there is a match, true, if not, false for that cell within workbook one.
It's sort of a reverse array lookup with text. It seems that cross workbook and text is what causes the challenge.
I have data that is on a separate .txt file (the source file) that resembles this;
A
B
C
D
E
F
1
Case
District
Pct
Division
Level1
Level2
2
305035
0
20
72
[Code] ..........
Using VBA from within the destination workbook, I would like to use an input box that allows the user to request/specify what numerical number (0 through 55) in Column B of the txt file (the source file) will be used to determine what data to copy to the destination file. The cells to copy to the destination file would be from Column A through Column G of the source file onto Sheet1, E2 of the destination file.
Column B of the Source file will only contain numbers. However there will be numerous identical numbers in Column B. All of which will need to be copied onto the destination workbook.
From the sample above, if the user were to enter '15' in the input box, the desired result on the destination sheet beginning at E2 would look like this;
E
F
G
H
I
J
1
Case
District
Pct
Division
Level1
Level2
2
502046
15
1
3
[Code] ............
I need to find a specific text in column D of sheet2 of my worksheet and copy that row to sheet1 to the last blank cell in column B. The macro should continue to search for the next text and copy rows only if there is active cells in the range column A : C of sheet2. I need a VBA code to do this.
View 5 Replies View RelatedSee attached spreadsheet for reference : MacroHelp.xlsx
I would like the macro to look in column I, and when it finds "TRUE", I'd like it to copy and paste values in all the cells to the left of it.
Reason being is that I want to rid the row of its formula, so the next time someone changes the info (the date the vlookup is searching for) in the tabs those cells are referring to, I will not lose the data it returned previously.
Really all I want is to copy and paste the values in the lowermost row of new information for each plant, but this is the best way I can currently think of.
I've removed the tabs the cells in columns B-G are referring to for sensitivity's sake.
Finding any specified Text like "Cube" down a specified Column in this case "D" when Text has been found
Copy the 24 cells directly below and Then Paste to G1.
I tried to writer my code myself but I have a long way to go. Here is what I must do for my case:
I want a macro to find the row that include a specific text (For example "SMSC") in a range (A1:A100) then copy this entire row below the cell which has the value "OTHERS". That is, if there are 10 pieces of "SMSC" so these rows including "SMSC" should be listed below the cell "OTHERS"
I have some EXCEL files, titled as "AAA", "BBB", "CCC", so on... Calculated values are placed in Column Z for each file. In order for me to export the files to another software, I would need to create another new EXCEL file (I call it MASS) and place all the calculated values in that new file. In that new file, the titles have to be on Column A and the calculated values on Column B.
For example, File "AAA" has 120 calculated values. In MASS, the word "AAA" has to appear on Column A a number of 120 times and the 120 calculated values are then placed on Column B. Each value must correspond to the word "AAA". The same procedure goes for "BBB", in which the word "BBB" is placed on Column A after the end of "AAA". What I want to achieve is by using a macro that will look up the title of the Active Worksheet and then scan Column A in MASS. If the title matches whatever is in Column A, then the macro will paste the corresponding calculated values onto Column B automatically.
For example, for file "GGG", the macro will look up the word "GGG", scan through Column A in MASS for the start of the word "GGG" and paste the calculated values at the start of Column B. Could I have an idea of how might the macro looks like?
I am having trouble with the Find method in Excel VBA.
This is the piece of code that I have written:
Sub NCMVariables()
Dim x As Integer
Dim c As Object
Sheets("Data").Select
With Worksheets("Data"). Range("A1:A60000")
Set c = .Find("USD", LookIn:=xlValues)
If Not c Is Nothing Then
I have a commissions workbook with about 20-30 sheets. In A1 of every sheet is a Name and in column G is a bunch of Numerical Values. I want to create a "Grand Total" sheet where I have the Name and the Values corresponding from each of the sheets onto my final one.
View 3 Replies View RelatedI have a workbook with many sheets in it. Within each sheet there is a cell with the Text "March 09" there are then 3 cells to the right of this cell with relevant information. Is there a Macro that can search for this text March 09, then copy this and the 3 cells to the right of it and paste special this information 1 cell below for all 4 cells.
View 2 Replies View RelatedEssentially, I have 2 Sheets:
"SheetWSS" = data to be copied
"SheetWSD" = destination of copied data.
Below is a sample of the data in "SheetWSS"
----------A------------------------B-------------------------C
1------Trade ID -------Description---------System no.
2--------579----------------Loan ---------------------- 7
3--------580----------------Deposit---------------------22
4--------702----------------Deposit--------------------- 11
5--------703----------------Loan ----------------------- 58
6--------732 ---------------Loan------------------------66
7--------733----------------Deposit-------------------- 99
etc...(no more than 10000)
Now, an explanation of the data:
1) I work for a small bank (CORP) that takes deposits and gives loan.
2) CORP books these trades using only system no. 7 and 11; other system nos. belong to customers.
3) When a single trade is booked, the 2 sides of the transaction is recorded (by Trade IDs) . E.g rows 2 and 3 relates to one trade. So if CORP loans money with system no.7 to CUSTB, who uses system no.22, it shows for CORP a loan and for CUSTB, a deposit.
4) Everyday, the data in "SheetWSS" is updated with a different number of rows from previous, but the number of columns remain the same.
So, here's what i'ld like the macro to do:
1) Go into Column C, find system no.7 and 11.
2) For each 7 and 11 found, Copy the next row . So if for e.g, system no.11 was found in C4, i want the ENTIRE ROW 5 to be copied.
3) Paste the entire next row in "SheetWSD" until we have a list of all opposing sides of the same transactions initiated by CORP.
I am in the process of writing a VBA code(I should I am fairly new to this code writing!!!).What I need to be able to do is below.(enclosed please find a output in an xls file) What I should be able to do is below:
1.Find the text "Cash(No Listing)(Monthly)"
2. Offset to the 13th Column after that
3.Select the value in this column ,copy the value
4.Go to a row above and move one column to the left i.e.offset (-1,-1) and move 12 column backwards i.e.offset(0,-12)
5.Copy the value in 3 above to this entire range
6.Repeat this process for the entire file
My code is as below.Let me know where am I making a mistake. Just to let you know that this code performs the job well for the first entry i.e in the yellow makde area and doesn't do the job for any further entries .Llooks like I have some problem with the loop but not sure as to whats happening!
I'm using a code to copy text from a word doc into a spreadsheet. It does it all right, but when it comes to saving, it does not save the open worksheet and prompts me to save as a copy. If I do so, nothing is changed in the original file and the copy file has the information copied from the word file.
This is the code I'm using to write and save the spreadsheet.
...
(VBA in WORD)
Set wdApp = Excel.Application
Workbooks.Open FileName:="C:UsersljsDocumentsword2excel.xls"
Workbooks("word2excel.xls").Activate
Worksheets("Plan1").Activate
Worksheets("Plan1").Range("A2").Value = DOCname
Worksheets("Plan1").Range("B2").Value = CarNo
Worksheets("Plan1").Range("C2").Value = WordNo
ActiveWorkbook.Save
ActiveWorkbook.Close
...
I would like to create macro, where it would on macro run copy text from active cell and find that value in another sheet (in column H) and select that cell.
What I did is this:
Let's say sheet - "delivery" - has a row1 that includes all possible delivery days. So A1 is 1.9.2013, B1 is 15.9.2013, C1 is 1.10.2013 and so on.
I want to make a macro, that will gradually go through whole row 3 in sheet "delivery" and look for "A1" date in sheet "Orders". Sheet "orders" have for example in column B the date of delivery, and in column C product of the delivery.
I want the macro to find all deliveries with "A1" date, and paste all products that will be delivered on this day under cell A1 (sheet delivery). then move on to the cell B1 (sheet delivery) - find all orders in sheet orders, that will be delivered on B1 date, and list all products with this delivery date under cell B1 (sheet delivery).
Example:
Sheet order
A
B
C
Date of delivery
Product
1.9.2013
orange
[Code] ........
Unfortunately simple Pivot table is not able to do this simple list.
I have one sheet for each day of the month with a table that has Employee Name, Reason, and Expected Return. I need to copy each line into the monthly sheet, but each day may have varying number of rows. Needless to say I would like to do this without copying lots of blank lines into my consolidated sheet.
View 10 Replies View Relatedhow to work macros or VBA
I have a workbook with multiple sheets named by month and year that I use to keep track of loans I work with at a bank. In these sheets I have info such as:
Column B = due date
Column D = loan# A
Column E = loan# B
Column F = status
Column H = followup needed
(Columns A,C, and G aren't important for the current need)
What I am trying to do is create a main sheet (TRACKER) that all I will have to do is press a macro button and it will pull info for each loan that is in a pending status.
I need a macro that will search column F (Status) on all sheets and find each instance of "Pending" and once that is done, copy rows B,D,E, and H in each "Pending" instance and copy them to their designated area on my TRACKER sheet. After that is done I need it to continue to the next "pending" instance and do the same on the next available line on my TRACKER sheet.
The overall goal would be that everyday I can press the macro and it will repopulate the sheet with the current pending items (as each day I will change pending status' to complete and no longer need to track it the next day).
I already have the tracker sheet set up and ready to go with the spaces as follows:
Column G&H = Merged cells where due date will need to go
Column I&J = Merged cells where loan# A will need to go
Column K&L = Merged cells where loan# B will need to go
Column M thru S = Merged cells where followup needed will need to go
I'm trying to figure out a way to find a specific sheet in a workbook that does not contain the macro. Within the macro I have a cell which holds the name of the specific sheet I would like to find but I can't get it to work for some reason...
'Dim officen As Integer
'Dim thiswb As Workbook
officen = Range("A2").Value
Set thiswb = ActiveWorkbook
' Open the Active Info file
Workbooks.Open "C:My DcoumentsActive 20080616.xls", , , , "xxxxxx"
' Dim sourcewb As Workbook
Set sourcewb = Workbooks.Open"Active 20080616.xls"
Sheets("officen").Select
RowCount = ActiveSheet.UsedRange.Rows.Count
Range("B2").Select.............................
I'm not very good at programming with excel and ive looked every where for how to do this but i cant find it ....
View 9 Replies View RelatedI am having trouble getting my IF statement to test if the cell contains the text "sale" return "X" if not "Y". I need it to search through the text string in that cell and find a certain word, and if it finds that word, retrn a value. I am really having difficulty with is what symbol or function do I use for the logical test? (i.e. =, <>, MATCH, INDEX?)
View 4 Replies View Related