Is the some way I can find out how many VLOOKUP formulas I have in a sheet and a workbook?
I can find them with ctrl F, but is there a what to return a number of how many instead of counting frome the Find box.
if I could find a good book on formulas, I might be able to raise the bar on my questions.
View 3 Replies View RelatedHow to copy a formula (16 columns) from a workbook to another, without referencing the source workbook.
Some people are using tricks such as replacing the equal sign "=" for another character such as "^" then using replace all to put the equal sign back again... but this is too much trouble.
What do I need to do to get my vlookup formulas to look into another workbook(or excel file) without having to open it up.
Here is a sample of formula that I have:
[=IF(C13="","",VLOOKUP(C13,Data,21,))]
Problem-1) i want to round off the digit in the same cell i,e. Formula in F12 should be included in D12.
Problem-2) i have entered a sample account.in this i want to post the data entered in day book into their respective sheets of jaya and supervision automatically.
I am currently using a macro to copy a sheet from a closed workbook in to my current workbook. However this copying is based on the sheet name. At present when I run the following code
View 11 Replies View RelatedI am using the Vlookup function to find a particular code in one sheet then give me the cost data that is associated with that code and put it into a similar cell in another sheet. It will work fine if I use (for example) A2 to E39 as my table_array. This would be fine if I only had 38 rows of data to look for the code on. However I have thousands of rows of data that need to be checked. Therefore when I change the table array to anything greater than E40, the vlookup will not work and it will only return a value of zero instead of the actual cost data. This is very weird and does not make sense that anything is wrong.
The only thing I can think of is that the vlookup function has a limit on the number of rows that it can look for data in. However, I did not think that it had a limit at all.
I know vlookup can find specific text in a column when the formula resides on the same sheet. But for my actual application (a 15 page price list) I was attempting to use vlookup on sheet 2 and have it find specific text on sheet 1. Note that sheet 1 will be having additional rows added through out the table over time, so vlookup cannot use a specific cell location.
My attached example can simulate the problem by sorting the table by name (A-Z).
on sheet 1 in cell C39 i need to find data from sheet 2 in row B that is 534 as in C32 is 11.2 and on sheet 2, 11.2 equals 534
View 2 Replies View RelatedI want to vlookup from sheet2 cell E2 to find all matches in sheet1 in coulmn G and add totals together in coulmn E. The match I am looking for is used in several rows of coulmn G on sheet1. I only want cell E2 on sheet2 to give me total amount from data in coulmn E of sheet1 when a match is found in coulmn G of sheet1.
View 9 Replies View RelatedThis is the error i get by doing> edit> move or copy sheet
A formula or sheet you want to move or copy contains the name 'HTML', which already exists on the detination worksheet. Do you want to use this version of the name?
I want to do is copy a sheet into the same book. If I click yes, two more errors pop up.
I made the following code to merge 2 workbooks together.
The code is to be executed when the user has Workbook A opened. (All sheets in workbook KPISWD are supposed to be moved after all worksheets in workbook KPICustomers).
I keep getting a debug error on the code that is supposed to do the actual move and loop until it is finished with all of the sheets in Workbook B.
Code:
Dim KPICustomers, KPISWD As String
KPICustomers = ActiveWorkbook.Name
Workbooks.Open Filename:= _
"W:FacturatieKPI per periode SWD.xls"
KPISWD = ActiveWorkbook.Name
[Code] ..........
I have the below code, which now looks to see if a file is open or not, if it is, then copy and past 'Data' and if not open the book and copy 'Data'.
I think the code is sort of right, but im missing something, as i keep getting runtime error when i try and copy. Here is the
Sub PrintSaveKPIUpdate()
Dim sFilName As String
sFilName = "C: estCashSales_KPI.xls"
Set Main = ThisWorkbook
If IsOpen(sFilName) Then
' Book is Open.
Worksheets("Setup Data"). Range("Data").Activate
I am trying to take an address book on the internet and copy/paste it into excel- not hard right? Ok, so that is done. The problem I have is that there are over 2000 addresses- and they all copy straight down into one column. I know how to transpose the information- but come on- there are over 2000. that seems like a LOT of work. So my first question would be is there a way to do this all at once? For each company/name/address/phone I need one row per company.
View 9 Replies View RelatedI have managed to use ADO to copy data from a closed book to my active sheet. Problem : it copies only the text, and not the dates or figures...
Code:
Sub TestReadDataFromWorkbook()
' fills data from a closed workbook in at the active cell.
GetDataFromClosedWorkbook "H:P&LYE TempDiv P&LP&L Report 020312.xls", "A1:Z1000", Range("A1"), False
End Sub
Code:
Sub GetDataFromClosedWorkbook(SourceFile As String, SourceRange As String, _
TargetRange As Range, IncludeFieldNames As Boolean)
'GetDataFromClosedWorkbook "C:FolderNameWorkbookName.xls", "A1:B21", ActiveCell, False
'GetDataFromClosedWorkbook "C:FolderNameWorkbookName.xls", "MyDataRange", Range("B3"), True
[Code]...
I have a workbook that I would like the same operation on all sheets except the first sheet in the book every time I update it (which is once a week).
I get data (currency format) for all of my employees on a weekly basis. Unfortunately this data is shown as a negative number and I need to invert these values. (So I use the formula below)... but I have to do this manually for about 35 sheets and I figure I could automate this somehow with a macro. Here's what I do usually and what I would like the macro to do automatically:
I want to insert a column after column G.
I would like to enter the following formula into H2:
=IF(G4="u", "u", IF(G4
I have one sheet for each day of the month with a table that has Employee Name, Reason, and Expected Return. I need to copy each line into the monthly sheet, but each day may have varying number of rows. Needless to say I would like to do this without copying lots of blank lines into my consolidated sheet.
View 10 Replies View RelatedI have an excel file which I use when I book keep journals in work. Each time I come across a new piece of bookkeeping I add to the file, name the sheet and index it. (I've attached a loose example for illustration) so the bookkeeping template.xls gets bigger every day.
Currently, when I book keep on a particular day, I open the template.xls workbook;
draft my journals;
and then manually copy the worksheets I have completed during the day from the template.xls workbook and paste the sheets into a new book and save the days bookkeeping as the current date.
With the file I have attached can someone show me how to write a macro and apply it to each of the buttons on the various work sheet tabs (each button will run the same macro).
Upon clicking a button, I would like the macro to;
Copy the active sheet into a new book and save the file as the current date.
Each subsequent click of a button the macro will check if the .xls file exists for the current date, if it does, then it will just copy the active worksheet to the file that has already been created.
In the new file which is saved as the current date, I need to remove the macro button and the hyperlink that reads back to index.
I have had some helpful macro's provided from another forum, however, the other forum does not appear to enable users to upload files, so I can't quite convey what it is I am trying to achieve.
is there a way to cause my custom menu items to grey out like the built-in ones, depending on the current selection or when the status of the active worksheet/workbook changes (e.g. when the book is protected to disallow certain actions)?
Obviously I can trap any problems once the associated VBA is invoked, but it'd be more professional if I could just prevent that from happening in the first place.
I'm trying to write a macro that selects cell A1 in each sheet within the book. I've written the following code:
Code:
Sub a1()
For i = 1 To Sheets.Count
Sheets(i).Cells(1, 1).Select
Next i
Sheets(1).Select
End Sub
However, it produce this message: "Run-time error '1004': Select method of Range class failed."
If I slightly modify the code to
Code:
Sub a1()
For i = 1 To Sheets.Count
Sheets(i).Select
Cells(1, 1).Select
Next i
Sheets(1).Select
End Sub
It works fine. I'm curious why this happens.
i have done a search on this topic and found many similar answers to many similar questions. All specify using Application.Run "workbookname.xls!macroname".
In my code, the filename has an assigned value as the master code goes out to many secondary files - the user selects the particular one they want at the start of the macro. The variable assigned is called "UpdateKAMsFile".
how do i get the macro called KAMsRandomColour to run in the workbook designated by UpdateKAMsFile?
so to start off im not able to attach things due to security reasons, what i need is either 1 of 2 macros. if its possible, both are related. one possible is as follows: i need it to go through a certain column (say I for example) and look at the information in it, this information can vary from peoples names along with dates and other stuff, i want it to look through these and if anything has a date today and prior i need the cell to be highlighted. problem is sometimes it might have 2 dates, or no dates. it should have todays date, their name, other information, and future date of something. but not everyone does, this is the macro i dont think that can exists.
2nd macro possibility the other macro uses the first sheet, AFTER been highlighted, normally by hand, and takes it to another workbook and puts in in certain spots. so the first sheet has names of everyone in column K. what i need is it to look at column I and if its highlighted take entire row to other book, and put into sheet under the person name in their tab. the second book has a tab for each person (at this time 18 tabs) which can fluxuate, and each tab is the persons first and last name, without spaces. since when i put sums on main page it didnt want to work with the spaces i had to omit them. again im not sure this is possible.
I am struggling to find a macro which can look at a name in column 'BT' and search it in the address book of Outlook to then place the email address of that person in column 'ED'
There are 35,000+ people in the address book and there may be over 5 email addresses for one name, so is there any way a message can appear for the user to select which email address is correct if there is more than 1 contact for that name?
I have a sheet using VLookup to find EMail and Web addresses. I can get the address to show up but not as an active URL address. Is it possible to have the address "active" so I can click on it and activate the EMail or Web Site?
View 5 Replies View RelatedI receive pdf files in which I have to copy multiple columns of data into a spreadsheet. The version of Adobe does not break the info out into seperate columns and the length of data in various columns varies from row to row. There are product names of various lengths followed by a planogram size and then some other data which is numerical seperated by commas, but is treated as text. Is there a formula which will look up a value in a cell and then report everything to the right of it?
PRINGLES SC & O 12 6,12,44,89
COMBOS PIZZA SNACKS 8 10,44,90,101
In the example above, the 12 and the 8 would be the POG size, which I have been able to extract, however, I would like to get all the info after that value into a seperate column. Can I combine vlookup and right to look up the POG size that has been moved into a seperate column to get that other info out?
I would like to know if there is a way to copy a spreadsheet and paste it into a new tab on another spreadsheet. We currently download 2 lots of spreadsheets from SAP and would like to create another spreadsheet to act as a 'central' preadsheet. What I would like to happen is that the data from the 2 downloaded spreadsheets will be automatically pasted into 2 new tabs on the central spreadsheet, then run some formatting macros (which I can do fine).
View 3 Replies View RelatedI have a basic client database on worksheet 'Database' and I have hundreds of 'forms' of identical size and layout on worksheet 'Proforma Template (2)'. These run vertically down the spreadsheet.
I wish to populate the forms from selected cells in 'Database'.
I used the folowing code to extract a client ref number from 'database' to 'Proforma Template (2)'
Sub Move_Ref()
Dim MyDirector As String
Dim MyRowCounter As Integer
On Error Resume Next
Sheets("Database").Select
Range("A38").Select
MyRowCounter = 0
MyDirector = "start"
Do Until MyDirector = "End"
MyDirector = ActiveCell.FormulaR1C1 'Place mouse at start of Folder List
ActiveCell.Copy........................
I would like to create a spreadsheet with 3 columns: employee ID, last name, first name. Then on the 4th column I would like to enter the employee ID and have the last name and first name auto populate into the 5th and 6th columns. How do I do this?
View 14 Replies View RelatedCan you use two vlookup formulas as the text field in a concactenate formula? See below for example the formula I am using that is returning an #NA formula.
=CONCATENATE(VLOOKUP(A2,qacontact,6,FALSE),VLOOKUP(A2,qacontact,7,FALSE))
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....