I would like to create a spreadsheet with 3 columns: employee ID, last name, first name. Then on the 4th column I would like to enter the employee ID and have the last name and first name auto populate into the 5th and 6th columns. How do I do this?
I attached a file containing two sheets. The first sheet is called Input on this sheet there are several categories of which I displayed the first three on. My ultimate goal is to get the Input per category broken down horizontally over the line-items on the Output sheet. Every category contains several line items to which costs are attached (f.e. in category 10, line item 4000, the costs are 33,000$ and so on).
The problem is that every month the costs are changing per line-item, but also the number of line items per category will change due to the fact that the line-items are only displayed if there are in a specific month costs booked to the line-item. In other words sometimes line-items are added due to costs booked at the line-item, but if in one month there are no costs booked at the line-item it disappears from the overview. A formula containing: '=if(category=10,vlookup(... is to static due to the changing line-items.
I am using a lot of linked reports that have to be rewritten each month. For example smaller formulas look like this:
=('S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$228*2)+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$262+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$292
What I want to do is extract the file path from the above formula and make it a composite of several cell references.
So what I need is to have a cell where they can change the month and another where we can change the year. So I set up several named cells that look like this:
Attached is a spreadsheet I am working on. The cells I am having difficulty with are I5 and I6. Cell I5 should be pulling a value from the 2nd tab based on C4 and C5 AND C6. Or at least that is my intent. However when I change C6 to 6 I get an N/A. When it is 5 based on 15,000 it enters $2,353.73 but according to my table it should be $2,710.23 I am having the same issue with I6. Based on 15,000 it should enter $190. Where did I go wrong.
I want to extend a formula like so- =Sheet2!M3 =Sheet2!M60 =Sheet2!M117
Basically I want it to go up in increments of 57 when I copy the formula down. Is there an easier way to do this rather than typing it over and over again? I looked on an older post and saw some information about OFFSET and INDEX but couldn't figure out exactly how that worked.
In a nutshell, I have data that needs to be sorted but some intermediate to advanced (to me) excel formula needs to be used to sort the ranking properly. I've already used index, match and large but it does not suffice.
I am building a tool for work, and in one of the sections of the main worksheet, I would like the cells to pull specific data from another worksheet that contains the results of a web query. The web query pulls a table of data, with a double header (rows 3 and 4). One column header is for the date and the other is for the time the data below corresponds to. There are also row titles along the left hand side.
I need a formula that will find the column that meets two conditions:
1) Today's date 2) A specific time (referenced from a cell on the main sheet)
It must then pull the data from the cell in that column that is in the row marked "Total".
Here is an example of the data set from the web query:
I have done quite a bit of looking on the web and tried out several different formulas/variations. I think I'm getting close, but just can't get it quite right. Here are a couple that seem close and their results:
This one correctly finds the date and "Total" row, but seems to ignore the MATCH(J3,'Rodeo Data'!$D$4:$JS$4,0) section, which is designed to find the specific time in row 4. It returns either the "Total" row value from the first or last column with the correct date depending on which match type argument I use.
This one returns the standard "#N/A" error message.
I am using Windows 7 and Excel 2010. "Rodeo Data" is the name of the sheet that contains the web query data I have included. The J3 and O3 references are cells in the main worksheet that contain the time I want the match function to find.
The desired output from the formula would be if I referenced it to today (20 Nov 2012) and 19:45, it would return the value of 65,826.
It may also be worth noting that the number of columns and rows in the data set is dynamic.
I have tried the Vlookup formula, and also the index/match formules but I can't get my desired outcome. As you can see the setup is fairly simple. For turnover I want to lookup the values based on Period AND profit center This last bit is my problem, how to define a double criterium.
The idea is to choose the wanted latest estimate (cell B1) and that for turnover, discount etc the values are based on 2 criteria (periode and profit center) I have also added the desired outcome to clarify my question.
I have a worksheet that has numerical data in A1:A22. In E1:E61 I have set values in numerical order and in F1:F61 I have a letter or letters that correspond to E1:61.
I am trying to write a formula in B1 that will look at the value in A1 and then match it up in E1:E61 and then return the corresponding letter in F1:F61.
I tried with the VLookup, and HLookup and neither one worked for me. I have a reference table with all the data, and then input sheet where I want to bring this data by using one of the excel function. ie. When I enter office name on the top of the input page, I would like the Tax ID # in cell C3 to fill in using the excel function from the data on the reference tab. Same with cell C14 & C15. see attached for an example.
I think I need to combine functions to allow me to automate data entry from a table from another worksheet. If the Name entered in column A on Exp Breakdown matches a name in column A of Salary Breakdown I cannot seem to write a function to scan the table in Salary breakdown and lookup the percentage that person is paid from a specific program number. I have attached a sample worksheet to hopefully make it easier to understand.
I have data on two separate tabs. Data in columns A of both tabs potentially match. I am trying to identify and pull the value in column C of the second tab where the values in columns A match and the first instance where the value in column B on the second tab is less than the value in column B of the first tab. The values in both columns B are dates.
column A first tab = column A second tab column B first tab < column B second tab (first instance of less than) pull value from column C on second tab to appropriate row of column C on first tab.
I have a tab that has Employee Name in one column and the benefit they chose in another column. The employee name is repeated a number of times since they have chosen more than one benefit.
I am trying to create a new tab where the employee name in is the first column (only once) and each benefit is listed in separate columns along the top. I want to put an "x" in the column for the benefit the employee has chosen.
Is there a way to say "look for this employee, see if this benefit is what they chose, and if it is, put an "x", if not, leave blank"?
Is it possible to create an index of cell data (in my case personal names)? And if so can it be done so that each entry is a button to click to go to the cell?
If I have a column of data with a bunch of values (which can't be sorted & which is constantly changing so cant be broken into another column and then sorted) what formula do I need to output the second occurrence of a value in that column?
Attached example file has data with which I need to do the following;
On the tab "part list" I put in the part number in column F. Column C should then be populated automatically by looking up column F in the tab "Lookup" and showing the value found in column B of that tab.
The difficulty with this is, is that when the part number in column F starts with "DN", the lookup value should end with "FD/A" and when the part number in column F starts with "Z", the lookup value should end with "TY/A".
This last part I can't get it to work. I've tried vlookup with a index/match function inside, but it won't work somehow...
******** ******************** ************************************************************************>Microsoft Excel - M_NECPE.Man Accts.xls___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutR1=RSTU1New CodesOld Codes 2 310100199999V 4101002NEW 51010032270A 61010061100 7101009NEW 81010101104 91010111101P 101010121101S 111010141102 121010151102L 131010181130 141010222203 151010231106I Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
The code in column E & G is as follows:
******** ******************** ************************************************************************>Microsoft Excel - M_NECPE.Man Accts.xls___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutG62H62G63H63G64H64G65H65G66H66G67H67G68H68G69H69G70H70G71H71G72H72G73H73G74H74=EFGH621106B| 631100|101006 641101D| 651101K| 661101P|101011 671101S|101012 681102|101014 691105R| 701103|101037 711104|101010 721105| 731106|101031 741106I|101023 Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I have used a lookup table to calculate the value in column H as follows, but cannot get it to work
Which gives me proper result...but the problem i m facing is i have many columns after L4 like M4, N4, O4 and so on....where i have to get the result.
So for that every time i have to paste the above formula and manually change the col_index_num i.e. 6 then 7,8,9 in every column where i use the above vlookup. So is there anyway that it will append the col_num_index by 1....i.e.
I am trying to find out whether it is possible to reference to a sheet index number, instead of sheet name, in a VLOOKUP formula.
For instance, normally I would write:
VLOOKUP(A1,'ExampleSheet'!A1:B10,2,False)
(I hope got the translation to English language Excel correct)
Let's say that the sheet index of Examplesheet is 2 (at least it is 2 the way VBA sees it).
Is there a way I could reference sheet number 2 in the VLOOKUP formula, instead of its name? My sheet names vary, but the formula should look in the same area, regardless of name.
I have a table full of names and cars sold. The table tracks the person's progress. It is like a diary. It's a simplied version of the DB I am currently working with.
Is it possible to do the following things? I have basically 2 types of questions.
1)When was the last red car sold?
2)When was a car sold irrespective of color?
The answer to each question will be put in separate columns. I have only included January but I will do this for the entire year of 2010 and also I will do this for all of the names in my database. I think there are about 300.
When was the last time ANDY sold a RED car? The answer should be 1/12/2010 The answer will be put in ROW A COLUMN I
When was the last time ANDY sold a car irrespective of color? The answer should be 1/12/2010 The answer will be put in ROW A COLUMN J
When was the last time BILL sold a RED car? The answer should be 1/10/2010. The answer will be put in ROW B COLUMN I
When was the last time BILL sold a car irrespective of color The answer should be 1/11/2010 The answer will be put in ROW B COLUMN J
I have the following arrangement PVCu_Woodgrain_DoorF190210300#REF!
PVCu _woodgrain_Door is a drop down list that selects from a number of named ranges.
The Cell that shows (F1) and is called DOORSTYLE with 6 choices F1, F2 ... F6 (I cannot change these to numeric only values)
300 is the 2 previous cells added together. It is called DRSZ1 and will match a numeric value in the named array.
My formula cell with the issue has this formula; =INDEX(INDIRECT(ARRAYDR1),MATCH(DOORSTYLE,INDEX(INDIRECT(ARRAYDR1),0,1)),MATCH(DRSZ1,INDEX(INDIRECT(ARRAYDR1),1,0)))
I know MATCH(DOORSTYLE,INDEX etc. should be a VLOOKUP to find F1 in the named array, but I just cannot get it right.
I am trying to place a hyperlink on each worksheet to an Index worksheet. This is what I come up with so far, and it does not work.
Code: Sub CreateIndexHyperlinks() Dim ws As Worksheet For Each ws In Worksheets ws.Hyperlinks.Add Anchor:=ws.Range("H1"), Address:="", SubAddress:="Index", TextToDisplay:="Back to Index" Next ws End Sub
It successfully puts the words "Back to Index" into cell H8 of every worksheet, but this cell does not link back to the Index sheet (which is called "Index"), the way I want it to.
I don't really understand the Address and SubAddress part of the argument for the Hyperlinks.Add method. I am guessing the Address part is "" because I am linking to a place in the same workbook. Is that right?
I tried changing the SubAddress to Worksheets("Index") and Worksheets("Index").Range("A1") but that just resulted in an error message.
Where my variables would be based on whether a person is under EnglishSS1 and getting a score of <=10, the resulting rating would be 3. I know this is doable by doing a vlookup with a range lookup value of false. However I have roughly 70 column headers and it will be a bit taxing to combine an If and Vlookup statement to address it.
I have attached a sample sheet for reference : Book1.xlsx‎