I am trying to have my macro go down G6:G48 and if the value "Cat" is in the cell then copy B2 and paste it in the cell that has "Cat". I need to copy & paste instead of have cell equal to because I need the borders to be the same also.
View 2 RepliesI've attached a workbook which contains two sheets:
PAYM
DEVICE_PAYM
Data is updated on DEVICE_PAYM each day with the figures I need located in column "AN". I need to be able to copy the data from "AN" and paste it into a column on the PAYM sheet. The destination column on the PAYM sheet needs to be specified by inputting a specific date - ideally, I would like to use the calendar Add-In as part of this process. I've already input some code for the calendar but am unable to develop this further so that it finds the correct date column and pastes the data across from the other sheet.
Am working in Excel 07, but this would need to work in 2000 as well.
Need a macro that will...
1. Select a range of cells from B4 to RX. X is defined as the last row where Column A has a value.
2. Copy the visible cells
3. Open an email in Outlook (not via the email workbook function of excel), enter "Submission" into the title, enter "Dear X," insert 2 returns.
4. Paste the copied table (not the workbook, just what is on the clipboard) into the body the email.
I am trying to find a macro that can search a sheet for any cell that contains the text "Not on AOI" selects a range that contains that cell, 81 rows below, and 2000 columns to the right, then cuts the selection and pastes it 162 rows below the original cell where the text was found. What's hard is that the number of columns between the "Not on AOI" cells is variable.
I'm very new to excel macros and the parts I think I've put together are:
Cells.Find("Not on AOI", After:=ActiveCell, LookIn:= _
xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:= _
xlNext, MatchCase:=True).Activate
[Code].....
i try to paste in active cell copied range.
I mean that i do follow:
- i select range of cell - mostly range of column f.e. A2:A500
- i click/select on any free cell (f.e. B1)
- then i run macro
i expected it paste unique values (text or number)
this dont work
i dont know how defined the range
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
View 2 Replies View RelatedIs there a vba solution to finding certain text in a text string then Cut and
Paste it into the next cell over. For example:
Col A | Col B
Joe Bloggs 26 (og) | (og)
Joe Bloggs 78 (pen) | (pen)
Joe Bloggs 84 |
Owen Tudor-Jones 89 |
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
View 5 Replies View RelatedI have been struggling for a while to copy data from one worksheet to another and reset the target range.
The copy bit is cool, the range resetting bit is not. I have tried various methods, but none seem to work.
For example, the below code generates an error: "Compile error: Argument not optional"
I have stuck the particular command button script below to let you see what I am trying to do:
Private Sub cmbFilter_Click()
Dim sCriteria As String
On Error Resume Next
I have the following code that let's the user choose and " import" data to an existing sheet. It works well up until now. The problem is that the three ranges that I am trying to copy the data from on workbook to another has changed size. In previous version of my workbooks the range was two columns by 10 rows. Now, it is 1 column by 10 rows. So, when I run this macro it doesn't work because the two ranges are different. Is there any way to:
1) Only copy over one of the rows of a range thus making the macro run?
2) Do not run that part of the macro if there is an error?
Thanks so much for reading this long-winded description but the error is a big problem
Private Sub CommandButton1_Click()
Import_Data_Form.Hide
Run "UnProtectAll"
Set b = Selection
ad = b.Address
' Local Variables
Dim wkbDataFile As Workbook
i have spent 40 hours, and still didn't find a solution. Please help is need it!!
example:
i have to find all articles with same code (222). first one has Q =100 second one Q=250.
soled Q=150
(i am talking about 5000 rows, 400 different or same articles per month- 12 months)
columnA-----columnB---columnC
222 ----------100---------0
111-----------50
333-----------70
222----------200---------200
333---------- and so on
first i have to deduct from the first one it finds (max. till 0 ...it can not be negative) ....after finding another one it deducts the rest---it means 50
Is there any kind of formula with this possibility.
if it is poorly writen please let me know for more info.
i am not an expert in excell, but i have tried variations of sumif, vlookup functions, but i always get stuck deducting the whole Quantity from all of the same (222) articles .
I want to copy Column H value. Data from H6 and below.
Go to Sheet 2, and find a word "Reports" in column C and paste the data in D column.
It would be like
Master Sheet, column H6 n below data.copy
Paste in Sheet2, search word "Reports" in column C, and paste D6, D8, D11, D14, D20 likewise till all cell in Column C with word "reports" to updated with adjuscent value from Column C of Master sheet.
I'm trying to create a macro that will automatically change the prioritization of work that is to be done. There is data in A:10 to M:60. Each row 10 through 60 represents one order. I would like the supervisor to put an "x" in column O. Then select any cell in a different row. Then when he hits the command button, cells A through M of whichever row has an "x" will move to A through M of whichever row has the active cell. This would push the effected cells down a row. If there is no "x" in column O, I would like a message to return, "Please select job by putting an "x" in the corresponding column O". Also, if the active cell is not within rows 10 through 60, I would like a message that returns, "Cannot place job there." I know the messages are dumb. I can change them later.
View 5 Replies View RelatedI would like to have a VBA which has two conditions. I have a unique number in cell A2. This unique number can occur in the area A7:A10000 (filled with unique nr. formula). If the unique number exists in this area, I would like to copy row A2:BB2 and paste values into the row to which the unique nr has been found. If the unique number does not exist in the before mentioned area, I would like to find the first empty row in column B7:B10000. Therafter, copy row A2:BB2 and paste values in the last empty row.
View 8 Replies View RelatedCurrently there are 3 sheets in my wbook, however there are likely to be 30 or so soon enough. Each sheet has loads of Cols of data and no sheet is generally the same.
I'm after my "Control" sheet to display a replica of the columns entitled "Destination" found in all other wsheets. i.e. each sheet has a destination col and I need an automated way of getting these lists side by side.
The challenge I'm faced with is that the destination col in each sheet is never usually in the same column, i.e. sheet1 could be colA, sheet2 colB etc and each sheet might contain more than one destination col,
The following is a sample spread sheet similar to ones I use daily.
I am trying to create a macro that will help me do the following.
Look for the same account # shown in Column A to Column F. If the account # matches, copy the total Value in Column H to the correct account in Column C.
The problem here is that In column A, i've placed some headings so i'm not too sure if that'll cause a problem.
im currently using a Code that copies a visible range from one workbook and pastes that Range to another workbook. I dont like it though because every time it pastes the screen jumps.
I tried setting Range 1 = Range 2, its not giving me an error but its not "pasting" the information to the 2nd workbook.
I know ive done it before by doing each cell in each row individually but a its a big Data Table and that would take too long.
I am using the code below to copy a range and paste it over a variable range.
View 4 Replies View RelatedI have a sheet ("ORDEM"), i need paste values in sheets V1, V2 ...V5, but change array.
Look my file, i make manual result in V1
I have a pivot table that changes in size from day to day. The last row of the table starts in Column A with text "Grand Total". I need a formula that searches and identifies that text, then copies that row, and pastes the row to another sheet. note: the sheet the pivot table is on is titled Price Detail, the sheet I need to paste the row onto is titled sheet 2.
View 5 Replies View RelatedI want to copy a value in "A1" and i would like to paste it in Column "J" but the problem is that there are some values in column 'J' so i want a code that finds the first empty cell in column "J" and paste in there the value from "A1"
View 8 Replies View RelatedThe initial code was from this forum. I modified it so it wont work
The code finds the first instance but none after, why?
I am trying to create a workbook that would work as follows:
I enter values in worksheet 1 that calculate a comparison of 2 items.
I recorded a macro that pastes these 4 rows into worksheet 2 and clears data entered in worksheet 1.
So far - easy.
What I would like to do is find some code that would let me enter new values in worksheet 1, and when the macro is executed, it would find the first blank row on worksheet 2, skip a row, and paste the info.
By doing it this way, I would be able to keep adding new items, compare them and add them to worksheet 2.
I'm currently making a database of my DVDs and BluRays, and thought that doing it in Excel, would make it nice and easy to see.
Tho, after some testing on my own, and redoing some of the sheets, to make it easier and less work, I'm stuck ....
I have a value in sheet3 cell "C9". (the value is stewart)
I am tring to have the macro go down column "C" in sheet1 and the value is the same as "C9"s value in sheet3 then copy the 7 cells to the right and paste them in the 7 cells right of "C9" in sheet3.
Example: If the value in cell "C9" in sheet3 = "stewart" and the value in "C109" in sheet1 is "stewart" the copy C110:C116 in sheet1 and paste those values in C10:C16 in sheet3.
I guess you wouldn't have to offset, you could copy C109:C116 and paste it to C9:C16 since its the same value.
I am trying to find text in one workbook and paste it into another. I've tried a Vlookup, and now I'm trying a Find, and neither is working.
This is what I have so far...
Sub FindAddress()
Dim GCell As Range
Dim Page$, Txt$, MyPath$, MyWB$, MySheet$
Txt = "N.A.V."
MyPath = "T:01862a7R228 Reports2039067"
[Code] ...........
I have two spreadsheets, A & B. In spreadsheet A, user will input a contract number and values for the contract. The user inputs the contract number in cell D4. I have linked this cell to cell B1 of spreadsheet B.
I want Excel to
-copy values from spreadsheet A
-then go to spreadsheet B and find the value of B1(which is the contract number entered in cell D4 of spreadsheet A)
- arrow over 14 columns
- then paste
here's the code i have so far. No matter what contract I input in cell D4 of spreadsheet A (when i step through the code) excel always takes me to cell C10 of spreadsheet B!?!?!
note: the code is in a module in spreadsheet A
Sub find_contract()
'
' find_contract Macro
' Macro recorded 03/15/2007 by b944553
whats the most effiecient way to find all values under column B2 and all values in column O2 and paste them in column U2?
View 9 Replies View RelatedIm trying to get some VBA to search in my worksheet to find a match to the value of cell B5 (the value of B5 changes depending on user choice), then once a match is found I want to highlight from the matched cell to the right 5 columns and down to row 193 (so in total 6 columns would be highlighted down to row 193), then copy and paste special values over those cells.
View 9 Replies View Related