Is there a vba solution to finding certain text in a text string then Cut and
Paste it into the next cell over. For example:
Col A | Col B
Joe Bloggs 26 (og) | (og)
Joe Bloggs 78 (pen) | (pen)
Joe Bloggs 84 |
Owen Tudor-Jones 89 |
I want to copy Column H value. Data from H6 and below.
Go to Sheet 2, and find a word "Reports" in column C and paste the data in D column.
It would be like
Master Sheet, column H6 n below data.copy
Paste in Sheet2, search word "Reports" in column C, and paste D6, D8, D11, D14, D20 likewise till all cell in Column C with word "reports" to updated with adjuscent value from Column C of Master sheet.
I'm trying to create a macro that will automatically change the prioritization of work that is to be done. There is data in A:10 to M:60. Each row 10 through 60 represents one order. I would like the supervisor to put an "x" in column O. Then select any cell in a different row. Then when he hits the command button, cells A through M of whichever row has an "x" will move to A through M of whichever row has the active cell. This would push the effected cells down a row. If there is no "x" in column O, I would like a message to return, "Please select job by putting an "x" in the corresponding column O". Also, if the active cell is not within rows 10 through 60, I would like a message that returns, "Cannot place job there." I know the messages are dumb. I can change them later.
View 5 Replies View RelatedI am trying to have my macro go down G6:G48 and if the value "Cat" is in the cell then copy B2 and paste it in the cell that has "Cat". I need to copy & paste instead of have cell equal to because I need the borders to be the same also.
View 2 Replies View RelatedI would like to have a VBA which has two conditions. I have a unique number in cell A2. This unique number can occur in the area A7:A10000 (filled with unique nr. formula). If the unique number exists in this area, I would like to copy row A2:BB2 and paste values into the row to which the unique nr has been found. If the unique number does not exist in the before mentioned area, I would like to find the first empty row in column B7:B10000. Therafter, copy row A2:BB2 and paste values in the last empty row.
View 8 Replies View RelatedCurrently there are 3 sheets in my wbook, however there are likely to be 30 or so soon enough. Each sheet has loads of Cols of data and no sheet is generally the same.
I'm after my "Control" sheet to display a replica of the columns entitled "Destination" found in all other wsheets. i.e. each sheet has a destination col and I need an automated way of getting these lists side by side.
The challenge I'm faced with is that the destination col in each sheet is never usually in the same column, i.e. sheet1 could be colA, sheet2 colB etc and each sheet might contain more than one destination col,
The following is a sample spread sheet similar to ones I use daily.
I am trying to create a macro that will help me do the following.
Look for the same account # shown in Column A to Column F. If the account # matches, copy the total Value in Column H to the correct account in Column C.
The problem here is that In column A, i've placed some headings so i'm not too sure if that'll cause a problem.
I have a sheet ("ORDEM"), i need paste values in sheets V1, V2 ...V5, but change array.
Look my file, i make manual result in V1
I have a pivot table that changes in size from day to day. The last row of the table starts in Column A with text "Grand Total". I need a formula that searches and identifies that text, then copies that row, and pastes the row to another sheet. note: the sheet the pivot table is on is titled Price Detail, the sheet I need to paste the row onto is titled sheet 2.
View 5 Replies View RelatedI want to copy a value in "A1" and i would like to paste it in Column "J" but the problem is that there are some values in column 'J' so i want a code that finds the first empty cell in column "J" and paste in there the value from "A1"
View 8 Replies View RelatedThe initial code was from this forum. I modified it so it wont work
The code finds the first instance but none after, why?
I am trying to create a workbook that would work as follows:
I enter values in worksheet 1 that calculate a comparison of 2 items.
I recorded a macro that pastes these 4 rows into worksheet 2 and clears data entered in worksheet 1.
So far - easy.
What I would like to do is find some code that would let me enter new values in worksheet 1, and when the macro is executed, it would find the first blank row on worksheet 2, skip a row, and paste the info.
By doing it this way, I would be able to keep adding new items, compare them and add them to worksheet 2.
I'm currently making a database of my DVDs and BluRays, and thought that doing it in Excel, would make it nice and easy to see.
Tho, after some testing on my own, and redoing some of the sheets, to make it easier and less work, I'm stuck ....
I have a value in sheet3 cell "C9". (the value is stewart)
I am tring to have the macro go down column "C" in sheet1 and the value is the same as "C9"s value in sheet3 then copy the 7 cells to the right and paste them in the 7 cells right of "C9" in sheet3.
Example: If the value in cell "C9" in sheet3 = "stewart" and the value in "C109" in sheet1 is "stewart" the copy C110:C116 in sheet1 and paste those values in C10:C16 in sheet3.
I guess you wouldn't have to offset, you could copy C109:C116 and paste it to C9:C16 since its the same value.
I am trying to find text in one workbook and paste it into another. I've tried a Vlookup, and now I'm trying a Find, and neither is working.
This is what I have so far...
Sub FindAddress()
Dim GCell As Range
Dim Page$, Txt$, MyPath$, MyWB$, MySheet$
Txt = "N.A.V."
MyPath = "T:01862a7R228 Reports2039067"
[Code] ...........
I have two spreadsheets, A & B. In spreadsheet A, user will input a contract number and values for the contract. The user inputs the contract number in cell D4. I have linked this cell to cell B1 of spreadsheet B.
I want Excel to
-copy values from spreadsheet A
-then go to spreadsheet B and find the value of B1(which is the contract number entered in cell D4 of spreadsheet A)
- arrow over 14 columns
- then paste
here's the code i have so far. No matter what contract I input in cell D4 of spreadsheet A (when i step through the code) excel always takes me to cell C10 of spreadsheet B!?!?!
note: the code is in a module in spreadsheet A
Sub find_contract()
'
' find_contract Macro
' Macro recorded 03/15/2007 by b944553
whats the most effiecient way to find all values under column B2 and all values in column O2 and paste them in column U2?
View 9 Replies View RelatedIm trying to get some VBA to search in my worksheet to find a match to the value of cell B5 (the value of B5 changes depending on user choice), then once a match is found I want to highlight from the matched cell to the right 5 columns and down to row 193 (so in total 6 columns would be highlighted down to row 193), then copy and paste special values over those cells.
View 9 Replies View RelatedI need a Macro that will search the range A6:A19 for a match to A3. Once a match is found I want contents of B3:F3 pasted in the corresponding row that the match was found in. In this example contents of B3:F3 would be pasted in B13:F13
View 15 Replies View RelatedThe idea is that i have several monthly data in columns. I also have a subtotal column that can be a "Total Trim I", "Total Trim II", "Total Trim III" or "Total Trim IV". I also have a yearly total: Jan Feb Mar Total Trim I Apr May Jun Total Trim II Total 2005
I wanna cut the "Total Trim I" column, paste it after the Yearly Total and cut and paste the "Total Trim II" after the "Total Trim I" column for every year... It'll look like this: Jan Feb Mar Apr May Jun Total Trim I Total Trim II Total 2005. But not every trimester has 3 months... I've been thinking about a find function but i have troubles with the implementation.
how does one go about finding a specific valuein a worksheet, then selecting the value in the next column, then pasting the value in a different worksheet?
For example, I want to find a particular person's name in a worksheet, upon finding the name, I want to select the number associated with the person which is in the column to the left of the name. I then want to copy and paste the number in a different worksheet.
I basically need to copy/move the text in column E, from vertical to horizontal using VBA when column C is the same. Then delete the extra lines. eg. C1:C3 = 1, so all the text from E1:E3 needs to goto E1:G1, then Rows 2&3 can be deleted as they are no longer needed. (Note: there are not always 3 instances, this can vary from 3-10). Its a bit hard to explain so i have included the Sample-finished.xls file as this is how it needs to look once its complete.
View 3 Replies View RelatedThe macro finds the value in cell D11 (which is the name of a product) in a worksheet called "Summary1". It then looks for this value in another worksheet called "Output", specifically in a column with a named range called "Products". If the value being searched is found in the "Products" named range column (in the worksheet "Output"), the code below copies the entire row for it, to another sheet called "OutputSummary1". I would like to change the code as follows:
1) Instead of copying the entire row, for which the searched for value is found, from the sheet "Output" to the sheet "SummaryOutput1", I would like to instead only copy the values in columns A, B, and E to the sheet "OutputSummary1". Also, I would like the values to be pasted pastespecial so that the formulas in the sheet "Output" are not copied over, and only the values are copied.
2) Secondly, I would like to know how to perform the find procedure (searching for cell D11 contents) on all sheets in the same workbook beginning with the word "Summary" (There will be worksheets called Summary1, Summary2, Summary3, etc. that the macro should be performed on.) As well, the pasting should be perfomed on all respective sheets called OutputSummary1, OutputSummary2, OutputSummary3, etc.
Sub CopyPaste()
With Worksheets(1).Range("Products")
Set c = .Find(Worksheets("Summary1").Range("D11").Value, LookIn:=xlValues) 'this identifies the value D11 in worksheet called Summary1
If Not c Is Nothing Then
firstAddress = c.Address
Do
c.EntireRow.Copy Destination:=Worksheets("OutputSummary1").Range("a" & Worksheets("OutputSummary1").Range("a65536").End(xlUp).Row + 1)
Set c = .FindNext(c)
Loop While Not c Is Nothing And c.Address <> firstAddress
End If
End With
End Sub
Here is some sample code I found on the internet similar to mine:
Windows("Waterfall 1.xls").Activate
Cells. Find(What:="accounts", After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Activate
Windows("test Schedule.xls").Activate
ActiveCell.Offset(0, 0).Range("A1").Select
Application.CutCopyMode = False
ActiveCell.Offset(0, 1).Range("A1:G1").Select
Selection.Copy
Windows("Waterfall 1.xls").Activate
ActiveCell.Offset(0, 2).Range("A1:G1").Select
ActiveSheet.paste
Windows("test Schedule.xls").Activate
ActiveCell.Select
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "4"
ActiveCell.Offset(0, -1).Range("A1").Selectp.
I now understand that there's a way to remove the activate statements, while still selecting that document to work with, and therefore greatly increasing the speed.
I am trying to find out if it is possible to create a macro in an excel workbook that will open another workbook saved on the computer, perform a find, copy specific data, and paste it in the opened/active workbook.
View 8 Replies View RelatedI am needing to find a specific row of data in one workbook and, once found, copy and paste the values into another workbook. The worksheets in both workbooks are formatted exactly the same. Only the first eight fields of the row need to be copied (e.g. A7:H7, A150:H150, etc.)
Will a combination of VLOOKUP and ROW do this and how do I get them to work together? Once the correct row is found, how are the fields selected, copied and pasted into the specific worksheet of the other workbook?
I have a report where I would like to have a macro search for a date string in columns N-S and copy the date to Column C, same row. The number of rows will vary from day to day. I would then like to format all of Column C to 'mm/dd/yyyy'.
Attached is a file where the date string is included in Column N on row 2 and Column O on the row 3. The dates for both these lines would need to be copied and pasted to their respective rows in Column C.
Finding any specified Text like "Cube" down a specified Column in this case "D" when Text has been found
Copy the 24 cells directly below and Then Paste to G1.
I want to insert some data in a number of cells (e.g. A1, B4, C4 and H8) on a worksheet ('Sheet 1').
I then want to press a button and have some code that:
Looks at column B on 'Sheet 2'
Finds the next empty row Copies and pastes the information from Sheet 1 into specific cells in that empty row.
Thank you all so much for this wonderful forum. Today has been a day of going through post after post. I am usually able to solve my problems through reading similar issues. However, just can quite get this one and I think it is rather simple, but frustrating none the less.
Attached is a spreadsheet with a list names in column B. The codes I have tried to write or have copied find one name and paste it to sheet 1. However, I need to find several names and then copy each row to sheet 1.