VBA To Find A Row / Cut It And Paste It Into Different Specific Row
Oct 9, 2013
I'm trying to create a macro that will automatically change the prioritization of work that is to be done. There is data in A:10 to M:60. Each row 10 through 60 represents one order. I would like the supervisor to put an "x" in column O. Then select any cell in a different row. Then when he hits the command button, cells A through M of whichever row has an "x" will move to A through M of whichever row has the active cell. This would push the effected cells down a row. If there is no "x" in column O, I would like a message to return, "Please select job by putting an "x" in the corresponding column O". Also, if the active cell is not within rows 10 through 60, I would like a message that returns, "Cannot place job there." I know the messages are dumb. I can change them later.
View 5 Replies
ADVERTISEMENT
Nov 15, 2006
I have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Sub Copy_To_Another_Sheet_1()
Dim FirstAddress As String
Dim myArr As Variant
Dim Rng As Range
Dim Rcount As Long
Dim i As Long
View 9 Replies
View Related
Nov 4, 2009
I want to copy some data from internet and paste it in to worksheet location Range A1:A30. the data look like following information.
LocationKuwaitP.O.Box:4819 SafatAddress:ShuwaikhTel:-22253580Fax:-24343645Category:CONSTRUCTION COMPANIES
the above information have following header ie. Location, P.O.Box, Address, Tel, Fax and Category.
every time one of the header inforamtion is missing ie. Address or P.O.Box, Or Fax, due to this problem every time cell address of information aganist header is change. supose in first copy/paste Tel inforamtion is in A15, but second time it may be on A13, and 3rd time it may be on A17 and so on.
I want to make a macro which search header ("Location", "P.O.Box", "Address", "Tel", "Fax", "Category" ) from a Range A1:A30. than down two steps to copy header information (75325412) and paste in fixed cell location C1:C5 (C1=Name, C2=Location, C3: P.O.Box, C4=Address, C5=Tel, C6=Fax, C7=Category) in same sheet. and repeat the steps to copy information aganist header from all header in Range A1:A30.
View 9 Replies
View Related
Aug 5, 2013
I'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
View 2 Replies
View Related
Apr 18, 2014
This is my code:
Worksheets("Charts").Range("Z3:AG7").Copy
Worksheets("Home").Pictures.Paste
I want to paste this at cell O15 in Home. How do I do that?
View 1 Replies
View Related
May 9, 2014
I am using a macro to determine the last row used in a sheet.
Code:
Sub sbLastRowOfAColumn()
'Find the last Row with data in a Column
'In this example we are finding the last row of column A
[Code]....
I now need to select cell d22 in "New Client Invoice" (sheet) and paste in in the row determined above but in column I of sheet "Transactions".
View 3 Replies
View Related
Jul 18, 2013
I have a code which is copy/pasting the selection specified number of times
VB:
Sub CopyNtimes()
Dim i
For i = 1 To Application.InputBox("How many times do you want to copy the selection?", "", 1, Type:=1)
With Selection
.Copy .Offset(i * .Rows.Count)
End With
Next
End Sub
How to modify this code so that it can paste the selection specified number of times leaving specified number or rows
For Example:
Selection is A1:Z10
need to copy paste 2 times...
Rows to leave: 3
So it should paste in the range A14:Z24 and then A28:Z38
View 5 Replies
View Related
Aug 10, 2013
I can't figure out how to delete the attached files that are irrelevant and I can't figure out how to upload new ones. I also don't know how to word what I need to happen
I want the data from everything, starting from row 5 and going to row 100, and not include column B or E.
How do I grab just that data? I have different formulas in each document. This is for invoicing, so the columns with the $ numbers can't be changed and I haven't been able to figure out how to not overwrite them when importing another spreadsheet.
View 4 Replies
View Related
Dec 27, 2013
I have dates in Column I (for the whole year) and i would like to paste them into specific cells in three different Columns A,B,C (ie A2, A5, A8, A11 etc) Same Numbers different letter for each respective column. I can get it to go from one cell to another but when i try to specify specific cells
This is what i have so far:
Sub Test()
Range("I1").Select
Selection.Copy
Range("A2").Select
ActiveSheet.Paste
End Sub
View 4 Replies
View Related
Mar 13, 2014
I create a macro to copy cells for data starting from A4 to N4 from sheet - Register to 'Case History' when the cells in column N are 'Yes'. Also, would like to copy specific range from A-N and not the entire row. Please refer to the attachment.
Tracker Dept..xlsx
View 2 Replies
View Related
Oct 28, 2009
This Macro is supposed to get certain totals for me from diffrent pages. Instead of selecting an entire row I want to select specific cells, so when it finds the word total on the sheet, whose location can change often it will return the value two cells away.
View 3 Replies
View Related
Feb 13, 2010
Feedback.xls is the file I want to have my macro run in. By pushing a button to run the macro, it will prompt the user to select where their file is on their computer. This file will have different file names based on the end user. For example sake, I've included CAP.xls.
After the user selects their file, it will prompt them to choose which tab to copy and paste data from. Typically, there will be 30+ tabs on their worksheet. For example sake, I've created 5 tabs on CAP.xls. The tabs in their workbook will be labeled as I have labeled mine, M1 CAP, M2 CAP & M3 CAP. Therefore, it should prompt the user to select which tab to choose from.
After the user selects their tab (M1 CAP, M2 CAP, M3 CAP), the macro should prompt the user to choose which row of information to copy. In CAP.xls, I have a few rows of information to choose from. They all start with FY10A1, FY10A2, FY10A3, but this information could change. Once they select the row, it will copy each of those fields onto the respectively labeled fields on Feedback.xls.
View 5 Replies
View Related
Sep 4, 2006
I have workbook "Sheet1" that has many rows and columns with values. Could I have code to find the cells value "plant2300" in column A and copy all the rows in column A that has the cell value "2300" into workbook Sheet2 (also copy with headers from Sheet1 to Sheet2 row 1).
View 3 Replies
View Related
Jun 12, 2007
I'm trying create a macro to enter a series of forumula's in a series of rows in whatever column is currently selected (or column which has a cell selected). IE if the active cell is C5 I want "=A1+B1" copied to C10 of it was AA43 selected I'd want "=A1+B1" copied to AA10. Have done this with setting a row as a variable, but whenever I've defined the column as one it comes out as a numeric value. and gives me "method range of object global failed"
View 3 Replies
View Related
Aug 29, 2007
I have a cell that contains various data but in the cell there will be a string of characters that will begin with either ON or TN followed by numbers. What I would like to do is have the sheet look at that cell and if there's a TN12345 (or any combination of numbers) or an ON123456 (same idea as the TN) I would like the sheet to pull just the ON or TN number out and paste it in a specific cell. The ON would have it's own cell to be placed in as would the TN.
Here's an example. C5 contains various data, a mix of text and numbers but it will have either an ON or a TN or both. I would like the sheet to automatically pull the TN number out and place it in A5 and the ON in B5. I would like this process to repeat all the way through the sheet to the max amount of rows since I have no way of knowing how many rows I'll need. Can this be done with a simple IF formula or does it have to be done in VBA or is it not possible at all.
View 7 Replies
View Related
Nov 29, 2007
I am attempting to copy a range from one worksheet and paste it to a new worksheet when the system clock hits a specific time. It needs to run continuously and identify that a previous colum has been filled and paste into the next open column. I am just getting my feet wet. I have some code to begin with but I am getting a 1004 error.
'Application. ScreenUpdating = False
Sheets("mysheet").Select
Range("E3:E10").Select
Selection.Copy
Sheets("CmyOtherSheet").Select
Range("B1:B8").Select
ActiveSheet.PasteSpecial xlPasteValues
'rTime = TimeValue("12:31:00")
'Application .OnTime rTime, "RunThisProcedure"
View 4 Replies
View Related
Apr 18, 2014
I need copy duplicate data to another sheet, but paste only column(1,2,4,5,6,13,14)
[Code] .....
Cross-Post : [URL] .....
View 3 Replies
View Related
Sep 27, 2009
Yeah it is 1:33 am where I am.
I'd like to filter a column and paste only 2 columns to another sheet in the first available row.
I found a code that was posted by Tom Ogilvy and made a few adjustments: ....
View 14 Replies
View Related
Dec 23, 2011
My problem is as such; each month I receive an application for payment. This will contain around 20-30 worksheets. However I only need to interrogate around 3-4 specific ones. The worksheets I require contain data describing the plant/equipment a company has purchased, or materials purchased over a period of time. Each month the worksheets are updated with the previous months data appended to the bottom. I am required to established if the equipments have been purchased at the correct rate.
The worksheets are all protected thus in order to interrogate them I am required to copy an paste their contents into a new work book in order to format them and insert my new "assessment" columns. I need to keep the work sheets separate in the new work book as they have different layouts however they have the same layout and work sheet names each month.
I needs a macro which would allow me to open up a new book them copy the specific worksheets from a specific file into the new work book. I then have a separate macro which re-formats them into the layout I require.
View 9 Replies
View Related
Jan 3, 2013
Is there any way to copy a column that has a specific range
=COUNTIF(B10:BE10,"*p")
=COUNTIF(B12:BE12,"*p") etc
to copy that to a column lets say 5 columns to the right without my range changing?
=COUNTIF(G10:BJ10,"*p")
=COUNTIF(G12:BJ12,"*p")
I need the same range in all columns, and I cant seem to accomplish this.
View 3 Replies
View Related
Aug 11, 2013
I use the following codes to copy a cell which contains a picture and paste it to another worksheet. I think these codes copy more than just the picture.
Since pictures in Excel are not associated with cells, how do I copy just the picture in a particular cell and how to determine the size of the picture?
These codes are in a for loop.
Code:
tempCell.Offset(0, -1).Copy
Workbooks(fileName & ".xlsx").Activate
Workbooks(fileName & ".xlsx").Sheets(1).Cells(cell.Row, cell.Column - 1).Select
Sheets(1).Pictures.Paste
Workbooks(fileName & ".xlsx").Sheets(1).Cells(cell.Row, cell.Column - 1).RowHeight = tempCell.RowHeight
View 3 Replies
View Related
Apr 30, 2006
Is there a way to copy then paste specific cells from closed .xls files in one directory ( more than 500 files ), and how, if all files are with one known password protection( my own files ).
View 9 Replies
View Related
Jun 10, 2006
I have a macro that pastes formulas as values on specific pages (("CTY EME", "Int Center", " Total SW dist cost", "Int, pubs & oth", "Total". Is there a way to compress the macro ie with the sheet names?
Sheets("CTY EME").Select
Cells.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("A1").Select
Application.CutCopyMode = False
View 3 Replies
View Related
Jul 22, 2007
I enter a part number in "D1". The number of components required for that part number is returned in "G1" based on a VLookup. I would like a macro that will copy and paste the part number I enter in "D1" in the first empty cell in column "D" and will paste it once for each component (G1) required. For example, if the number of components required is 4, and the first empty cell in column "D" is "D10", I would like to paste the part number in cells "D10", "D11", "D12", and "D13".
View 2 Replies
View Related
May 25, 2014
I have around 200 excel spreadsheets/workbooks with identical ranges but each with different data. There is a total of 5 columns and 225 rows in each spreadsheet/workbook. Looks something like this:
Workbook 1:
Title 1
Title 2
Title 3
Title 4
Title 5
A2
B2
C2
D2
E2
[Code] ....
The Cells I need to copy are in BOLD. I am trying to paste them onto another workbook as follows
Main Workbook:
Workbook #
File 2
File 3
File 4
A2
Title 5
A3
Title 5
[Code] ....
As you can see, each workbook has identical A2 and Title 5 columns, so they only need to be copied once onto the Main workbook where data from the B and E columns are different for each Workbook. So not only I need to copy and paste from a Workbook onto the Main Workbook, but the code has be able to paste it onto a new row in the Main Workbook (where each row in the Main Workbook will correspond to the data copied from Workbooks 1-200.
I am new to VBA but I tried a code where I would copy and paste one cell at a time onto the same workbook and not onto the Main Workbook, and then how to copy and paste from one workbook to another, but as you can imagine that would take a long time:
VB:
Sub dAmacro()
Sheets("Workbook1").Select
Range("G1") = "Workbook #"
Range("H1") = "File 2"
Range("I1") = "File 3"
[Code] .....
It seems like I need some kind of loop, where it would copy and paste a set of cells and repeat the entire process until it reaches the end of the Workbook 1 while making sure when doing same thing for workbook 2, that the data pastes onto a new row onto the Main Workbook. I feel I have the logic down, but its in the syntax where I am failing.
View 9 Replies
View Related
Apr 14, 2014
I need to copy and paste the specific dates from the specific city that the user will insert in the "dash" sheet.
Basically, I need the macro to read the city and range of dates that the user will type into the "dash" sheet and copy the columns "AA" to "AD" from rows specified by the dates input. Once it has been copied, it has to be special pasted just the value onto the sheet "1" beginning at location B2.
the the data will not be available as it is vlookups to another excel sheet that i have not provided. I have deleted the data, but you can pretty much put 1's everywhere.
View 11 Replies
View Related
Mar 26, 2014
I have recorded the below macro and I am not very happy with it. enhance the macro and add the following:
I need to copy the range "ROW" and past it below the range "MENU". Also the range "ROW" (ROW = copy of 3 line with some cells merged) is hidden.
I need to unhide and hide back the rang ROW. Right know I have to leave the range appearing otherwise my macro doesn't work.
HTML Code:Â
Sub ADD()
' ActiveWindow.LargeScroll Down:=2
Range("ROW").Select
Range("ROW").Activate
Application.CutCopyMode = False
Selection.Copy
' ActiveWindow.LargeScroll Down:=-2
Rows("7:7").Select
Selection.Insert Shift:=xlDown
Range("A7:A9").Select
End Sub
View 1 Replies
View Related
Mar 24, 2009
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
View 3 Replies
View Related
Aug 17, 2009
i have about 80 files that all have the same structure. I also have a general excel file that I need to fill with values from each of the 80 files. I'd like to use a macro that can be applied to each of the 80 files at a time (or at the same time, if that's possible) so I can copy the cells (only the text, not the formula) I need from each individual file to the general sheet.
e.g.,
each file is:
xyz 123
abc 456
ghi 956
I need to copy the "123" to a cell in the general sheet, "456" to a different cell in the general sheet and so on (to be able to choose which cell in the general sheet I am copying to).
View 12 Replies
View Related
Aug 27, 2012
I need to copy a specific column range K18:M180 to only columns that have an "X" on a specific row. Below is my small example.
In this example it would be in columns OPQ and WXY
Excel 2007IJKLMNOPQRSTUVWXY
121314xxxxxx1516$Units$/Units$Units$/Units$Units$/Units$Units$/Units
1718aaa180.0 0.00 19bbb0.0 0.00 20ccc1.6 0.11 14.74 21
ddd9.0 0.53 16.93 22eee7.3 0.45 16.22 232425Sheet1
View 1 Replies
View Related
