I want to copy Column H value. Data from H6 and below.
Go to Sheet 2, and find a word "Reports" in column C and paste the data in D column.
It would be like
Master Sheet, column H6 n below data.copy
Paste in Sheet2, search word "Reports" in column C, and paste D6, D8, D11, D14, D20 likewise till all cell in Column C with word "reports" to updated with adjuscent value from Column C of Master sheet.
I would like to have a VBA which has two conditions. I have a unique number in cell A2. This unique number can occur in the area A7:A10000 (filled with unique nr. formula). If the unique number exists in this area, I would like to copy row A2:BB2 and paste values into the row to which the unique nr has been found. If the unique number does not exist in the before mentioned area, I would like to find the first empty row in column B7:B10000. Therafter, copy row A2:BB2 and paste values in the last empty row.
View 8 Replies View RelatedI need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
I have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
View 3 Replies View RelatedI want to copy a value in "A1" and i would like to paste it in Column "J" but the problem is that there are some values in column 'J' so i want a code that finds the first empty cell in column "J" and paste in there the value from "A1"
View 8 Replies View RelatedI have the following code, so far:
Code:
Sub CopyPasteValue()
Dim ARow
Dim AColumn
Dim BRow
Dim BColumn
Dim Value
AColumn = 1
[Code]....
What I want it to do is to start in cell B1 and look down until it finds a non-blank cell; copy the contents of that cell. I then need it to go to the same row Col A and go down from until it finds the first non-blank cell then paste into the corresponding cell in Col B. It should continue this way through the rest of the worksheet. There is no set pattern to say to go down 5 rows or such. Also the number of pastes in each step is variable from 1 to ??
In my worksheet, the first non-blank cell in Col B is cell B3 and the first non-blank cell in Col A is A7. The paste should occur in cells B7:B10 because the next non-blank cell in Col A is A11.
I am looking to create some vba code that looks for a specific value in column 'm' (Z-AUD) for example and where it occurs within my data range copies and pastes the values in columns O,P and Q in to columns K,L and M.
View 2 Replies View RelatedI want to find data from a certain point and paste this to a cell. My objective is to get all the data on too one row. This row is always 1 in col M called Run#. The find locations never change, just the data being copied always changes . Heres example,
In col K find FHBASC and look across to the right 3 cells in col N and copy.
Look in col M and find 1, paste above copied data into col GI.
Then move down rows to next FHBASC and repeat process until end of sheet.
If I can get a very basic simple macro to do this, then hopefully I can just re write to suit my other data.
I am using MS Excel 2000. Sheet1 is my working sheet. Cell A17 displays the current date (dd/mm/yyyy). Cells B17:K17 display my summary figures for that day. What I would like is a macro button that would look at the date in Cell A17, and if it is the first of the month …. eg 01/03/2005 it should insert a new sheet into the workbook and put the name Mar05in this case or what ever month it is on the tab. It then copies Cell A17:K17 and pastes the data in to the corresponding monthly sheet starting in A3 to K3. Because my working sheet (Sheet1) is updated with different data daily the new summary data (always in A17:K17) needs to be copied and pasted under the previous days entry in the corresponding monthly sheet. For the month of March I should end up with 31 entries giving me a summary for that month.
View 7 Replies View RelatedI have a data sheet with employee information. Only one column. It prefixes information with codes, but keeps it in the same cell. I want to move data of certain types into their own columns, but the amount of data is variable, so I cannot simply move every Nth cell, etc.
i.e.
Employee#1
200 Firstname Lastname
204 99999999 (Employee ID)
G38 00005000 (i.e. Pension Deduction)
H38 00007580 (i.e. Benefits Deduction)
X96 00012099 (i.e. Staff Club Deduction)
Employee#2
200 Firstname Lastname
204 99999998
G38 00000775
X96 00001000
So you see some employees may have different codes altogether. But I know that I want all the cells that start with 200 to be offset (-1,1), and all the cells that start with 204 to be offset (-1,2), and so on so that basically I end up with columns of info instead of a one column list.
I have been reading and studying other peoples' macros, and am just starting to grasp the basic. When I wrote my own to accomplish this, I put this together, which doesn't work. But I don't know enough to know what I don't know.
first need to look for "PR" in column G, if found need to cut the entire row and insert at the top of the same worksheet.
View 1 Replies View RelatedI have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Sub Copy_To_Another_Sheet_1()
Dim FirstAddress As String
Dim myArr As Variant
Dim Rng As Range
Dim Rcount As Long
Dim i As Long
I need to find the first non-empty cell in a range and paste a constant value into the preceding cells.
aa bb
aa bb
aa bb
aa bb cc
aa bb cc
aa bb xx
aa bb xx
aa bb xx
aa bb cc
aa bb cc
I need to find a specific word from a cell and to paste it in another cell. Say example:
column A Column B Column c
1 Message to come Message
2 Print the following Print
3 logged in logged
I need to find a word "message" in column B and have to paste it in column C.Column C to be populated like the above.
Let's say sheet - "delivery" - has a row1 that includes all possible delivery days. So A1 is 1.9.2013, B1 is 15.9.2013, C1 is 1.10.2013 and so on.
I want to make a macro, that will gradually go through whole row 3 in sheet "delivery" and look for "A1" date in sheet "Orders". Sheet "orders" have for example in column B the date of delivery, and in column C product of the delivery.
I want the macro to find all deliveries with "A1" date, and paste all products that will be delivered on this day under cell A1 (sheet delivery). then move on to the cell B1 (sheet delivery) - find all orders in sheet orders, that will be delivered on B1 date, and list all products with this delivery date under cell B1 (sheet delivery).
Example:
Sheet order
A
B
C
Date of delivery
Product
1.9.2013
orange
[Code] ........
Unfortunately simple Pivot table is not able to do this simple list.
i need a method to find the end value in a row (right side) and select the empty cell to its right to paste data in.
problem is the row where this data is may change so using
limit = (row, col).end(XlRight).Col
I am trying to work out some code that will allow me to search worksheet2 to find the last filled cell in column A.
I would then like to copy the contents of the cell.
Then past this data into the first empty cell in a column in worksheet2
I want to copy some data from internet and paste it in to worksheet location Range A1:A30. the data look like following information.
LocationKuwaitP.O.Box:4819 SafatAddress:ShuwaikhTel:-22253580Fax:-24343645Category:CONSTRUCTION COMPANIES
the above information have following header ie. Location, P.O.Box, Address, Tel, Fax and Category.
every time one of the header inforamtion is missing ie. Address or P.O.Box, Or Fax, due to this problem every time cell address of information aganist header is change. supose in first copy/paste Tel inforamtion is in A15, but second time it may be on A13, and 3rd time it may be on A17 and so on.
I want to make a macro which search header ("Location", "P.O.Box", "Address", "Tel", "Fax", "Category" ) from a Range A1:A30. than down two steps to copy header information (75325412) and paste in fixed cell location C1:C5 (C1=Name, C2=Location, C3: P.O.Box, C4=Address, C5=Tel, C6=Fax, C7=Category) in same sheet. and repeat the steps to copy information aganist header from all header in Range A1:A30.
I am trying to find a macro that can search a sheet for any cell that contains the text "Not on AOI" selects a range that contains that cell, 81 rows below, and 2000 columns to the right, then cuts the selection and pastes it 162 rows below the original cell where the text was found. What's hard is that the number of columns between the "Not on AOI" cells is variable.
I'm very new to excel macros and the parts I think I've put together are:
Cells.Find("Not on AOI", After:=ActiveCell, LookIn:= _
xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:= _
xlNext, MatchCase:=True).Activate
[Code].....
i try to paste in active cell copied range.
I mean that i do follow:
- i select range of cell - mostly range of column f.e. A2:A500
- i click/select on any free cell (f.e. B1)
- then i run macro
i expected it paste unique values (text or number)
this dont work
i dont know how defined the range
Is there a vba solution to finding certain text in a text string then Cut and
Paste it into the next cell over. For example:
Col A | Col B
Joe Bloggs 26 (og) | (og)
Joe Bloggs 78 (pen) | (pen)
Joe Bloggs 84 |
Owen Tudor-Jones 89 |
I'm trying to create a macro that will automatically change the prioritization of work that is to be done. There is data in A:10 to M:60. Each row 10 through 60 represents one order. I would like the supervisor to put an "x" in column O. Then select any cell in a different row. Then when he hits the command button, cells A through M of whichever row has an "x" will move to A through M of whichever row has the active cell. This would push the effected cells down a row. If there is no "x" in column O, I would like a message to return, "Please select job by putting an "x" in the corresponding column O". Also, if the active cell is not within rows 10 through 60, I would like a message that returns, "Cannot place job there." I know the messages are dumb. I can change them later.
View 5 Replies View RelatedI am trying to have my macro go down G6:G48 and if the value "Cat" is in the cell then copy B2 and paste it in the cell that has "Cat". I need to copy & paste instead of have cell equal to because I need the borders to be the same also.
View 2 Replies View RelatedCurrently there are 3 sheets in my wbook, however there are likely to be 30 or so soon enough. Each sheet has loads of Cols of data and no sheet is generally the same.
I'm after my "Control" sheet to display a replica of the columns entitled "Destination" found in all other wsheets. i.e. each sheet has a destination col and I need an automated way of getting these lists side by side.
The challenge I'm faced with is that the destination col in each sheet is never usually in the same column, i.e. sheet1 could be colA, sheet2 colB etc and each sheet might contain more than one destination col,
The following is a sample spread sheet similar to ones I use daily.
I am trying to create a macro that will help me do the following.
Look for the same account # shown in Column A to Column F. If the account # matches, copy the total Value in Column H to the correct account in Column C.
The problem here is that In column A, i've placed some headings so i'm not too sure if that'll cause a problem.
I have a sheet ("ORDEM"), i need paste values in sheets V1, V2 ...V5, but change array.
Look my file, i make manual result in V1
I have a pivot table that changes in size from day to day. The last row of the table starts in Column A with text "Grand Total". I need a formula that searches and identifies that text, then copies that row, and pastes the row to another sheet. note: the sheet the pivot table is on is titled Price Detail, the sheet I need to paste the row onto is titled sheet 2.
View 5 Replies View RelatedThe initial code was from this forum. I modified it so it wont work
The code finds the first instance but none after, why?
I am trying to create a workbook that would work as follows:
I enter values in worksheet 1 that calculate a comparison of 2 items.
I recorded a macro that pastes these 4 rows into worksheet 2 and clears data entered in worksheet 1.
So far - easy.
What I would like to do is find some code that would let me enter new values in worksheet 1, and when the macro is executed, it would find the first blank row on worksheet 2, skip a row, and paste the info.
By doing it this way, I would be able to keep adding new items, compare them and add them to worksheet 2.
I'm currently making a database of my DVDs and BluRays, and thought that doing it in Excel, would make it nice and easy to see.
Tho, after some testing on my own, and redoing some of the sheets, to make it easier and less work, I'm stuck ....