I have mapped data from Sheet1 to Sheet2 and created graphs in Sheet2 using the data. but when I hide the rows in Sheet2 the Graph is being cleared off. Need a solution so as to display the Graph in Sheet2 while hiding the rows in the same sheet.
View 2 Replies
I have a spreadsheet with various hidden rows and columns that I do not wish the user to have access too as it contains too much detail for their purposes.
Copy/paste and copy/paste special also copies across the hidden columns and rows so what I need to do is to copy it to a new workbook but then remove the hidden rows and columns and just delete the existing formulas in the cells which total the data and insert a new autosum.
I have a worksheet that is shared. It has hidden rows and columns. Problem is those hidden rows and columns are unhidden when someone apart from me opens the worksheet! Only way round it is to have the worksheet unshared. How do I keep the rows and columns hidden?
View 3 Replies View RelatedOne of the fields I want them to enter is a library branch and I have used a data vaslidation list to provide a dropdown box.
To make it act more like a windows drop down box I have hidden 7 cells above this box with the 7 possible entries. This means that with autocomplete, if they start typing in the cell it will autocomplete the entry for them.
This work fine, but if someone presses enter from the cell above my hidden rows, one of the hiddenn cells is selected!
WHY!
I have no explanation for this behaviour, nothing like it has ever happened before, and I have no idea how to get rid of it.
example attached
I need to find, then replace a particular value ("/0"), however, some cells may be hidden. And I just discovered that I can not replace the value of a hidden cell! Am I missing something, or do I have to unhide the row/column that the cell is in and then replace it? ...this does not replace the "/0" with "0" if the row the cell is in is hidden.
Sub test()
Dim rMatch
Set rMatch = ActiveSheet.Cells.Find(What:="/0", LookIn:=xlValues, LookAt:=xlWhole)
rMatch.Value = "0"
End Sub
I have a set of data containing "N/A" in some cells, and when I try to plot the chart using stacked lines chart type, the chart is completely off. if the "N/A" are causing this problem and how to fix this.
View 5 Replies View RelatedMy chart with dynamic ranges still plots empty ranges despite using the following for empty cells:
Use of NA()
Use of #NA
Use of ""
Use of 0
What else am I missing?
I have 3 different series: S, J, and D. Each series has a list of different dates, and I need to plot the results for each date, while comparing the 3 series. I have created 3 different charts to display the results for each series - list of dates. However, I'd really like to chart all 3 series on one chart, so that you can see how the 3 compare.
I believe my obstacle is that the list of dates are not consistent between the 3. I tried to get around this by creating one table with all the dates, and leaving blanks where necessary (on Sheet 2). However, this created a problem because the blanks showed on the charts as 0s.
I have the Lat and Long for each of several US cities. I want to use these to create a bubble chart that plots the cities and which I can place over a US map picture.
However, I have the problem that, because of the curvature of the earth, the city locations form the lat and longs are not tying with the map.
how to adjust the lat and longs so that they will correspond to the typical US map?
For example, the base lat and longs for Denver are 39.5742 and -104.8588. What formulas can I use to modify these to match the standard map projection?
Say I have a line graph pic in jpeg. Can I plot the critical points (by clicking) on the line graph plot, so as to be able to get the (x,y) data, and thus, have all the data points to be able to re-produce the charts in XLS?
Basically, in other words, I would like to reproduce the line graph in XLS.
Or has anyone developed this kind of application, or can anyone redirect me to the right direction?
How do I plot the projected increase on an existing chart column ...
View 9 Replies View RelatedI want to do almost exactly this, but when I assign null using "", and plot the result on a graph, the graph thinks that cell is populated with a 0. Let me try to be a bit clearer. I have a range of dates in Col A, and percentages in B and C, but my last 3 dates in Col A have empty cells in B. Cols B and C are separate series. The line graph is (correctly) plotting series C, and series B, whose line stops where there is no more data.
What I need to do now is replace those empty cells with a formula like the one above. Ie, IF(ISBLANK(x1),<null>, <formula>), but using IF(ISBLANK(x1),"", <formula>) doesn't make the line on my graph stop.
I need to average the columns of data and ignore both hidden rows and zero values. I have tried writing if statements as well as the subtotal function. Both functions either ignore null values or hidden rows but not both.
The system wont let me update a sample workbook but Im wondering whether there is a formula or combo formula for this.
I am trying to develop a compliance report with Excel 2007) based upon a simple pass/fail criteria. The subtotals must be tracked both by Device (column) and by Requirement (row). There are macros (not included in the attached sample) that hides both columns and rows. I successfully found an example which I modified to correctly calculates data for a column when rows are hidden (see GOOD function below). However, I'm totally clueless on how to calculate data by row when columns are hidden (see BAD function below). What I'm trying to figure out is highlighted in red in the attached spreadsheet.
GOOD
=SUMPRODUCT(SUBTOTAL(103,OFFSET(B$2:B$5,ROW(B$2:B$5)-MIN(ROW(B$2:B$5)),,1))*(B$2:B$5="Pass"))
BAD (returns 0 and includes a circular reference)
=SUMPRODUCT(SUBTOTAL(103,OFFSET($B2:$F2,,COLUMN($B2:$F2)-MIN(COLUMN($B2:$F2)),1))*($B2:$F2="Pass"))
I have a feeling the answer to this will be 'no' based on the searching I've done, but is it possible to allow formatting of rows/columns on a protected worksheet, yet prevent the user from unhiding some rows/columns I don't want them to see? I've allowed them to format rows/columns so they can "size" them to fit the text they enter, but that has opened up the ability for them to unhide columns. Using Shrink To Fit would be cumbersome due to the number of cells involved.
View 5 Replies View RelatedIs there a way to plot the grand total from a pivot table on the pivot chart?
View 9 Replies View Relatedi am creaing a chart in excell but i have a problem. i would like to have a chart like this one http://shrani.si/?screenshotow31.jpg. but when i create my chart it looks like this http://shrani.si/?screenshotow2t.jpg. first chart is created with some macro so i dont know how is it working but i think the problem is in blank cells because if cell is blank the chart line will go to 0 but i dont whant that :s
View 2 Replies View RelatedWhen I hide columns in a column chart the different fill colors I used on specific columns no longer show up with the colors I originally had. Is there a way to maintain the proper sequence of column fill colors even when some columns are hidden?
View 1 Replies View RelatedI'm trying to overlay a Gaussian distribution on some data. The data is a frequency of particle size diameters, ranging from 200-1000 um (see attached). I'm using Excel 2013.
View 1 Replies View RelatedI have a database where I would like to plot graphs from data of different periods and different series.
My current method is to go to the data set formulas and changing data range. The tricky part is that I might skip data series because I am selecting the series required for each chart.
How to do plot the different graphs efficiently and quickly.
I am trying to generate a column chart with a high-low range overlay so that it looks like error bars. I've precalculated all values but cannot figure out how to add the high-low range lines. The ranges are in the min and max columns.
I tried using custom error bars but it did not work.
I have some data that I'm plotting on a bar chart and I'm trying to "HIDE" the columns with zero or null values. Basically, if the column is blank, I don't want a "gap" on the chart. I'm not getting this to work.
View 6 Replies View RelatedThis was so easy to do in excel 2003...However im now using 2010 and i cant figure out how to tell excel to ignore the empty cells for a scatter plot.
View 3 Replies View RelatedAttempting to hide columns (of cities) via VBA generates an error when that same city is reselected (either individually, or as part of the group) in the list box, upon clicking the 'Hide' button.
The error happens at this point: ...
vba to switch columns to rows in a line chart
I have the following
I am trying to do a SUMIFS from a chart with duplicate values in rows and columns.
Data looks like this:
So this is basically sales of different products (columns) on different routes (Rows).
I want to add up a total for all the same kind of products eg. Magnum for each route eg. Local Top End.
How do I delete filtered rows without deleting the hidden rows in excel 2010?
View 8 Replies View RelatedI have an excel file with a table in it. It contains 2051 records (attached). This is just a sample, the original file has around 30,000 rows.
When I start using filters, I run into problems:
Step 1: Filter by Unit, condition (e.g.) Unit_23
Excel shows in the status bar the following message: 437 of 2050 records found.
Step 2: If I scroll to the bottom of the table, the row numbers are colored in blue (normal for a filtered list) however the last row is not colored and it actually should not be shown since its unit is not what I filtered for (its unit is Unit_25)
Step 3: Clear the filter of Unit
Step 4: Sometimes (depending on what I filter for), one or more of the bottom rows are hidden!!!
Attachment 301726
I have data in B4:B55 and need a formula to return a count of rows, including rows that are blank. However, there are hidden rows that need to be omitted from the count.
View 1 Replies View RelatedI would like to have the cell A26 equal to "VAT" when I enter a VAT percentage and set the cell A26 to "NOVAT" or blank when the columns G:H are hidden.
View 6 Replies View Related
