Attempting to hide columns (of cities) via VBA generates an error when that same city is reselected (either individually, or as part of the group) in the list box, upon clicking the 'Hide' button.
I need to find out common numbers between columns. Each column has multiple number entries seperated by a comma. For example:
Column A: "5592,12222" and Column B: "1,2,3,4,5592,123123" and Column C: "3, 4"
I need to find out any numbers that are found in more than 1 column. Hence, the result should be something like "3,4,5592". If no match is found then maybe can indicate by coloring the cell. My data is over 50,000 rows and 30 columns. I need to do this for each row one by one.
Basically I'm trying to look up a series of numbers against a separate row of numbers and look for a match regardless or number order.
For example
If you look at the above picture I'm trying to do a query of some sort that will look up the numbers in A8:G8 in then search each row in the above table ie look for the numbers in B1:J1, B2:J2,B3:J3 etc I need to be able to search each row and look for the sequence of numbers regardless of order, if there is or inst a match for all numbers it should look at the next row and so on (maybe multiple matches). If there is a match then it should display the Name located in column "A" into cell G8. In this example to Jarrad row contains the numbers located in A8:G8. If there is no match it should display "None".
I'm trying to find any easy way to do this as I have over 500 rows I'm trying to query. The number's in A8:G8 in this example could also be more or less, ie here I have included 6 numbers but this could be 3 or 9 etc.
I have named ranges and I want to get the total number of columns/rows or the last cell so I can index relative off off it to get at a value of an individual cell. No I dont want to go definning all names for this specific location, I want the flexibility to relative address it from the row/column or last cell of the named range. I looked at the column and columns props. The first gives a number that makes no sense and not a total of all columns and the last gives back a Range of columns, wonderfully recursive.
I'm trying to come up with a formula to find the last row without any data in columns E and F and delete the 10 rows below them. Is there a way to do this?
I have a workbook in which I have two sheets. One sheet is a report and the other is a data dump. The data dump has headers in in column A starting in cell A6 and headers in row 5 starting in cell B5. There is then data going from B6:J20.
In my report I then I have same setup with headers in column A and row 5. The difference is that the headers are not in the same order as the dump. What formula could I use that would look for the two headers in my report sheet and then match it with the value in the data dump that uses the same two headers?
I need to find, then replace a particular value ("/0"), however, some cells may be hidden. And I just discovered that I can not replace the value of a hidden cell! Am I missing something, or do I have to unhide the row/column that the cell is in and then replace it? ...this does not replace the "/0" with "0" if the row the cell is in is hidden.
Sub test()
Dim rMatch Set rMatch = ActiveSheet.Cells.Find(What:="/0", LookIn:=xlValues, LookAt:=xlWhole) rMatch.Value = "0"
I have a macro that converts all my PDF Purchase Orders to a text file and inserts the data/text horizontally into another document. However because the PDF's or the text within the PDF can be fomatted differently (that is on different lines etc) it therefore imports the information and it looks mis-aligned.I have attached a simple spreadsheet showing some sample text as it is imported and then below this how it should look like, all in line.
The range where the highlighted text in red is, is variable (but say nothing more than a variant of 10 columns). The text can also be Uppercase or Lowercase.So, I was wondering if there is macro code to find the "text" on various rows/columns and align it all in another column?
I work for a charity and I have to cancel the donations of people whose credit card donations have been declined in three consecutive months.
If in Column A I have a list of donor IDs whose credit cards were declined in Jan 2008, in Column B I have a list of donor IDs whose credit cards were declined in Feb 2008 and in Column C I have a list of donor IDs whose credit cards were declined in Mar 2008, is there a way of showing in a fourth column which donor IDs were common (repeated) in Columns A, B and C? I would have a title for each column in A1, B1 and C1, and also the column where the repeated donor IDs would be displayed.
I need to compare two colums by number decription for example m344 in one column and fsh344-1 in another. All I want to match is 344. In column a I want to indcate the match by placing an X by each match. View my attachment for reference. I don't know if it makes a difference but the columns are centered in my original spreadsheet.
I have two columns of numbers (this week - Column A and last week - Column B). What I need to do is look at the numbers and pull two lists out in Columns C and D. In columns C a list of the numbers that are missing from last week in column D numbers that are missing that were added from the previous week. The two lists consist of about ten thousand rows of data.
i need to mark some row (which has some content written in), mark other row(with data too) and switch/transpose them mutual. when i was trying transpose method, which is using for switching rowns and columns, it wrote me error, that data are overlapping. it means it cant work on same things (rows > rows, columns > columns).
I have this kind of data going down about 2000 rows. I want to find how many times 1 and 5 appear in each row until there is no more data to read. I found the formula below but I cant use it for 2000 lines plus any extra that will appear in the future...
These are some data that I have ( inputs and outputs). I was wondering if there is anyway to find this equation. I can get more data if that helps in finding the equation.
I have 3 columns and 200 rows. The first column is for Name of product. 2nd column for number and 3rd for $value of number of products. Have 200 rows. Have done a sort and checked. 2 sets of rows are for the same product name. I want to know if it is possible to add up values in 2nd and 3rd column, 2 rows at a time , then 4th and 5th column and so forth, by some formula rather than doing it manually?
removing duplicate rows and move other data frm rows to columns.xlsx.
I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.
see the desired result tab in the sheet to get an idea of what I am looking for as the end result.
Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.
Company 1 Contact 1 Address 1 City, ST, ZIP 1 Phone 1 Fax 1
Company 2 Contact 2 Address 2 City, ST, ZIP 2 Phone 2 Fax 2
Company 3 Contact 3 Address 3 City, ST, ZIP 3 Phone 3 Fax 3
I want this:
Company 1 Address 1 City, ST, ZIP 1 Phone 1 Fax 1 Company 2 Address 2 City, ST, ZIP 2 Phone 2 Fax 2 Company 3 Address 3 City, ST, ZIP 3 Phone 3 Fax 3
all the way down.
I can't figure out how to record the macro to tell it to then skip the blank line, collect the next set of data, and put it in the next row. I can do it for two, but then it just replaces the first two with the next two and I lose data.
Column A is numbered 1 -100 successively Column B thru D contains data that goes with the assigned number in column A. I need to be able to move rows of data in column B through D to a different set of rows all at the same time (not one cell at a time) without disturbing the set numbers in column A. And with that, have all the other rows of data automatically adjust accordingly(not to be deleted or replaced).
I have individual data files (one for each participant). Each file has 64 rows (one for each trial in an experiment) and 18 columns (one for each variable). I would like to create a master data file in which each participant is represented in a single row. I will then have 1152 columns (18 columns for the variables, repeating 64 times so that each trial is represented).
In other words, my individual data files look something like this:
and I want to compile all the data into a single file that looks like this: Participant/Trial1_var1/Trial1_var2/Trial1_var3/Trial2_var1/Trial2_var2/ ... 1 55 43 65 54 43 2 . . .
I know how to record macros and use IF, THEN, AND, & SUMIF statements creatively, but that's about it. I was hoping to record a macro that I could use on each individual data file to turn it into a single row, and then paste each row into the master file.
I've got an excel file with over 20,000 rows with Column A being having values of a "Vendor Number" while Column B has a "Vendor Name" Here is an example:
Vendor #Vendor Name 1001ABC Supply 1002Larry, Moe, Curly Inc 1003John Smith 1004Fred, Wilma, Barney LLC
I'd like it to find the rows where the Vendor Name has a comma present, and then put it in another sheet, or in another column like column C and D. If I can't get both the Vendor # and Vendor Name re-inserted someplace, that is OK. The Vendor Name is the big one.
I want to design a search form in excel that will lokk for the values in excelsheet and when match occurs then pop up those rows in listbox in the form. There are different criterias: one is Client_no or Policy_no ,If the person knows this no then he can simply type it in the textnox and press search and then the matching row will be displayed in listbox. If the user doesn't know the policy_no then he can try other things in the frame e.g First name,Last name,any part of address(so hopefully we'll use like operator here),Postcode.