How To Find If A Cell Value Existing In Multiple Columns
Mar 13, 2013I want to find if a cell C1 is existing in columns A, B, D, or E. So I want to specify multiple discrete columns in a match function.
View 13 RepliesI want to find if a cell C1 is existing in columns A, B, D, or E. So I want to specify multiple discrete columns in a match function.
View 13 RepliesAttempting to hide columns (of cities) via VBA generates an error when that same city is reselected (either individually, or as part of the group) in the list box, upon clicking the 'Hide' button.
The error happens at this point: ...
I have two columns of account numbers. Column A would be considered the master list. Column B is data that changes on a monthly basis. What I would like is for a macro to compare column B to Column A and if it finds any account numbers not listed in column A it will insert a row into column A and copy/paste the account number from column B to A. Both rows are sorted assending so if its possilbe I would like the macro to insert the account number where it belongs or maybe just resort column A once it has finished. My knowledge of macros/VBA is very limited at this point
View 2 Replies View RelatedI have a spreadsheet with thousands of columns. Due to poor planning on my part I need to insert a column between each existing column (e.g. I need to insert a column between the existing columns A and B, B and C, etc...). I would rather not have to do this manually thousands of times.
View 3 Replies View RelatedI have a spreadsheet of courses required to reach a certification. On this spreadsheet I have listed the number of hours required for each course in one column, and how many hours I have accrued in an adjoining column. Not all the hours will occur at once, so I tend to bound from cell to cell adding hours in small amounts. What I am trying to do is create a macro that will allow me to add to the existing number of hours to the newly accrued hours, without typing over what is already there.
For example…Class 1 requires five hours total, and I have two hours accrued. If I accrue two more hours (for a total of four hours) I want to update cell E2 without going in to this cell manually and changing this number. I would like to enter the additional two hours in a text box or similar function, and have that function update E2. To add to the level of difficulty, there are four levels of class. This means not only do I need to be able to select which class hours need updated, but which level of class. I have attached the spreadsheet I am working with to try to make things a little clearer.
I have been put together some simple coding to find and replace a value (1) that i have obtained from a pivot table. My aim was to replace any "1" with the column header. The reason for this is that the cell(s) will be used in a VLookup at a late stage.
My problem is that I have the code to work for a single cell, but I want it to work for multiple columns so I don not have to create multiple macros.
I need to go from Column C to AW. I have a total row at the end - hence why I am using 'Step - 1'.
Code:
Sub FindReplace()
Dim i, lRow
Application.Calculation = xlCalculationManual
[Code]....
i am trying to do a search and i came across this. In the excel file attached you will see 2 column. Now if you take copy and paste "sterling rd" which is standing alone into the crtl F search field. It wont find it.
I have played with the format (made both general), i have CLEAN, Proper the text and tried that didnt work either.
I dont know what else to try. I am working with access, with a much larger list, however the linking to excel wont work and i know there is some difference font or format that i am missing.
I've a table and in the first column titled 'VALUES' (A1) I've entered values ranging from 1 to 100 (A2:A10). In the second column titled 'STATUS' (B1), 'closed' or 'NA' is entered (B2:B10). Now I need to find how many cells are there in the table with 'closed' status in the range 0-25, 26-50, 51-75 and 76-100.
VALUES STATUS
34 Closed
56 NA
44 Closed
98 Closed
18 NA
82 NA
23 Closed
40 NA
63 Closed
71 Closed
Closed Status Count
0 - 25 :
26 - 50 :
51 - 75 :
76 - 100 :
My spreadsheet has multiple "sessions" by date and each has three columns: a name, their organization, and a column where we want to display an "R" if they are a repeat participant. Each new session is entered to the right of the last. The names are in every third column. Like so:
name company R
name company
name company
name company R
Is it possible to search through the whole document to find repeating names, and then display an "R" in every third column if they are a repeat participant?
I am trying to find min value for a row (product price) within two columns (price lists) and return row one (company name) in third column ( see the attachmet). My first idea was to use “min” and “if” but a problem occur when there are text or zero or none values in the price list. I tried with conditional formatting, offset function, match-index and other methods without success
View 4 Replies View RelatedLets see if I can put this into words.
I am trying to find matches of a specific cell in various columns. Example:
Header 1 -------Header 2----------Header 3
-ABC123-----------abc123--------------abd123
-abd123-----------hjk321---------------hdn234
-Abc123-----------dsd123--------------sds332
If I searched for the value "abc123" I want it to return Headers 1 and 2 in a seperate column. It would not matter if the same value is in one column multiple times
So the results would show me the Column Heading for anything that reads: "abc123", "ABC123", "AbC123", "aBC123"
Is this possible?
I have a list of new payments received (sheet 2) along with their agreement numbers which I want to match to the list I had last month (sheet 1) to see which agreements are still paying, which have stopped and if there are any new ones.
The problem is that the the list of new payments received shows the agreement numbers with random prefixes and suffixes so my lookup returns #N/A
Sheet 1 - 24020130
Sheet 2 = 24020130FLE
My basic thinking (and I mean basic) is to do an edit/replace on sheet 2 entries and replace the FLE's with with nothing thus removing them completely then running the lookup but that doesn't tell me which are new payments received.
Then I could make sheet 1 text blue, sheet 2 text red, combine them, re-sort and manually go through the list but I'm hoping there's a sexy formula just waiting to be unleashed.
I have a macro that converts all my PDF Purchase Orders to a text file and inserts the data/text horizontally into another document. However because the PDF's or the text within the PDF can be fomatted differently (that is on different lines etc) it therefore imports the information and it looks mis-aligned.I have attached a simple spreadsheet showing some sample text as it is imported and then below this how it should look like, all in line.
The range where the highlighted text in red is, is variable (but say nothing more than a variant of 10 columns). The text can also be Uppercase or Lowercase.So, I was wondering if there is macro code to find the "text" on various rows/columns and align it all in another column?
I have a table in which the rows represent cities and the columns represent certain characteristics/ attributes a city can have. In the cells every city & attribute pair receives a "grade"
City EatingBeachSki
Barcelona 210
Chamonix 002
I would like to transform this so that every row represents a city & attribute pair and includes its corresponding grade.(I want to do this in order to be able to add more information about city- attribute pairs rather than about cities only)
City AttributeGrade
BarcelonaEating 2
BarcelonaBeach 1
BarcelonaSki 0
ChamonixEating 0
ChamonixBeach 0
ChamonixSki 2
I am aware that I can use a pivot table to sort out all the pairs with a specific grade. and then I could paste this into a new table. But my data base (number of cities x number of attributes) is huge and I was wondering if there is no automatic process to make this transformation.
I have the following macro which I use to transpose a number of columns in one sheet to rows in another sheet.
PHP
Sub task1()Dim i As Integer, n As LongFor i = 5 To Columns.Count Step 2 n = n + 1 With Sheets("Working_Checklist_1").Cells(10, i).Resize(16) Sheets("Summary_Intermediate").Cells(n + 2, "c").Resize(.Columns.Count, .Rows.Count) _ .FormulaArray = "=if(transpose(Working_Checklist_1!" & .Address & ")=0,"""",transpose(Working_Checklist_1!" & .Address & "))" End WithNextEnd Sub
I'd like to change this macro so to transpose from rows to columns. I've tried a couple of things, but can't quite get it to work.
I'd like to transpose every second cell starting from E7 to IV7 in Working_Checklist into column BU in Summary_Intermediate, starting from BU3.
firstly i am cross-posting this topic so here is the URL to the same thread in a different forum.
[url]
whats up everybody? i have to use two excel worksheets that someone else already created to make CSV (comma seperated value) files. these CSV files are to be dumped into a database. the problem is that the table has more fields than the spreadsheet does (the spreadsheet has 3 fields - network, mask, size - and the table has 10 fields). i can insert one entire column before (to the left of) network (for the ID field in the table) without a problem, but when i try to insert entire blank columns after size (to the right of the pre-existing columns) it only makes columns for the first 14 rows. i know this because when i save it as a CSV file there are only 6 extra commas for the first 14 rows. is there a way to insert an entire blank column for the entire spreadsheet (as in all the way to the bottom)? i dont want to have to manually type in all those commas. i am using excel 2002.
I am looking to split multiple different entries in a single cell into multiple columns and repeat this for all rows
Example (I have the below in a single Cell as column headers)
NCM Server Mgmt VLAN Site ID
Next Line down is the data (Each row in a single cell)
Enabled 10.10.10.0 50 TEST SITE 1
Enabled 10.10.20.0 50 TEST SITE 2
Disabled 10.10.30.0 50 TEST SITE 3
How I could achieve this as I have a number of projects where this would become useful
I know you can use delimiters but with spaces between the values I just can't fathom a way forward.
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
I am a teacher who has created a gradebook in Excel. Each class has a student template sheet, individual sheets for each student in the class (maximum 26 students/class) which has the structure of the template and some cell referencing to the template, and a couple of mark-entry sheets and a sheet that shows the progress of all students in the class.
A number of teachers in the school have been using this gradebook and I am constantly looking for ways to make it more user-friendly. Currently, when a new course starts, a teacher opens a blank copy of the file (which has all of the sheets I mentioned above present). To set up a class, the teacher enters the students' names once on the mark entry sheet (called the "Binder Sheet"), and then changes the individual student tabs (right click...rename...) to reflect the names of their students.
I am wondering if there is a way to have the individual sheet tabs (Student 1, Student 2...Student 26) update automatically to match the names that the teacher enters on the Binder Sheet in cells A4:A29.
I would like to be able to embed the update procedure/script into the blank template so that it is user friendly for others.
Problem: Unable to retrieve last cell value in both columns A and B with the following formula.
Range("A2:B2").End(xlDown). Copy
Presently this only finds the last value in column A and copies that value.
Would like to know how to modify/change the range to look for the last cell in both columns A and B?
I have this code to look into the "find" match in Column A, and then search to the right for the next columns empty cell and update data. but it seem like the code can only manage to offset 1 and update data to Col B, instead of find the next empty cell to update data.
Code:
Dim vFind1 As String, vFind2 As String, rFound As RangeDim bFound As Boolean
vFind1 = Me.CBSupplier.Value
vFind2 = Me.CBProducts1.Value
Set rFound = Sheets("Main").Range("A:A").Find(Me.CBSupplier.Value, LookIn:=xlValues)
[Code]...
I am trying to find the last cell across the columns in a specific row. i can do it going down using
Range("N6").Select
Selection.End(xlDown).Select
but can not get it to work going across.
I am creating a large vlookup. I have multiple instances of a name, twenty to be exact. I copy the first cell it is name1 and then I paste it for the next 19 cells below. Is there a quick way that I could have it go name2 name3 name4 etc all the way to 20? Currently I am just having to click and change the value manually.
View 11 Replies View RelatedI want to merge different worksheet of an existing workbook into one by macro .I did not want to repeat the rows label for each worksheet data.Also I want to get at right hand side i.e in G column the data to be extracted for respective worksheet in the merged data.I have enclosed in attachment an expected solution in a sheet name "merged".However the number of worksheet is here only 3 for sample purposes.However,in reality there is more than 3 .
View 9 Replies View Relatedi have a list of about 20,000 phone numbers that I need to edit.
all start
01 123456
01 123457
01 123458 etc
I am trying to create a macro that will change them to
+001123456
+001123457
+001123458 Etc
However, no matter what I try it always comes out as
+001123456
+001123456
+001123456
F2 Copy and paste is going to take me forever, and I am sure that there must be a quicker way to do this.
this is my first time creating macros so am completly lost.
I want to keep the text that is in the cell that I am editing, just add the country code and delete the space.
I have big library books database file. now i want to re check all the book with physical stock and mark in excel file.
i have one more file with books barcode no.
now i want to mark multiple cell in sheet..
(Code at the bottom of this message)
I have a file with a roughly 20 workbooks. I need to split the data in each workbook into two sheets, rename each sheet, then export the data to template with multiple sheets. After splitting the data into the appropriate sheets in the original workbook, Sheet1 in has only 1 row (plus header) and needs to be transferred to "Project Entry" in the template; Sheet2 can have any number of rows (less than 100) and needs to be transferred to "Activity Entry" in the template. I need to save the template based on the value of cell A1 on "Project Entry" sheet of the template. The organization of the columns in the original workbooks is different than that of the template, so this is not a straight copy and paste operation. The cell formatting in the template must be retained.
I have half of this under wraps. I've cobbled together some code that splits the original data where I need it split, copies it to new sheets and saves the files. I now need to figure out out to get it out of this saved file and into the template.
The crosswalk of values between the original data (Sheet1) and the template(Project Entry) needs to look like the below. So, variable 1 exists in column B of the original and needs to populate column B of the template, and column Q in the original needs to populate column G in the template. The variables and column relationships are different for Sheet2/Activity Entry.
SPREADSHEET COLUMN
Variable
Original
Template
[Code]....
I have a range of columns i.e. 23 columns (i.e. B through X). Someone can write records in these columns (starting from B21).
Duplicates are considered the rows with similar data in columns 3 and 11. I know about the removeduplicate method and works really well but i want the duplicates not to be removed. Instead another column shall be checked for date of entry (user will entry date in format dd/mm/yyyy). The newest entry will change the value of the cell in column 4 (islatest column)to TRUE while all other records will be FALSE. This will work with the filtering of data on a pivot table on another worksheet.
multiple search match and replace content in a different column so for example
new workbook (look up table)
sku
search1
search2
[Code]....
so something like where you compare two tables and find and replace based on another cell that matches in my sku.. more details would be if the table column aren't exactly matching but the column header and the row header would match and fill or replace in the correct/corresponding cell is there a macro or vba to do this job in excel?
i have is 3 sheets in the same excel document. Sheet 1 is the mater sheet, which is a compilation of sheets 2 and 3, however the sheet layouts are different.
The sheets consist of a list of names and details. Sheet 1 has all the names in the list, however sheet 2 and 3 only have partial lists that are in a different order from the original list. The details listed next to the names in sheets 2 and 3 are different and hence a straight forward row copy and paste will not work.
What i need is to write a vba script that can take the name from the master list, search sheets 2 and 3 for the name and lookup the variables placed in next to the name, then update the master sheet accordingly, then continue to the next name on the master sheet and do the update again, and so on until all is updated. I have already thought about using lookup functions in excel however there is 1000 names on the list and around 60 details so it would be messy.