Is is possible for excel to find a number in a cell and display it in a new cell?
A1 = AWS190B
A2 = AGZ160D
A3 = WGZ080D
Is there a command for excel to display 190 in A2?
B1 = 190
B2 = 160
B3 = 080 (or 80 is fine)
to update these values via a form in this sheet. I can find the correct row to be edited by entering a value from column A and B. The problem is if I want display the values of that row first and then change it. If I want to change row 10 data how can I bring back the value in ROW 3 AND THE COLUMN VALUE? The next step would be to do the actual update if I want to change ROW 10 to "Ooi" and a sales value of 200?
This is what I have done so far:
Dim myRows As Integer
With Sheets("Mrt")
'Retrieve history information for row
For myRows = 4 To 49
If comboxDay.Text = Range("A" & myRows).Value And textboxdescription.Text = Range("B" & myRows).Value Then
textboxbedrag.Text = Range("C" & myRows).Value
chkBTW_Ja.Value = Range("D" & myRows).Value
txtNota.Text = Range("S" & myRows).Value
End If
Next
End With
Picture attached to show how sheet looks like.
I have a column with unique identifiers (numeric) that are included in another column. I need to find this number in the column and pull the data from that column into a new one. For example:
Unique Identifier: 28530
Is included in this string: 10.1.8........28530_201_10-....
I need the content from the string pulled into a new column. It seems there would be a LOOKUP that would work, but I'm not able to figure it out.
file storage
1. Look at the "Days so far" section
2. Ignore cell C1
3. All the other cells in that row are shaded blue. Look at these.
4. Look at the "Volunteer" row - all the cells in that row are shaded blue. Look at these.
5. Wherever a name - any name - appears in the "Volunteer" row, 1 is added to the previous number in the "Days so far" section and the result is displayed in cell from the "Days so far" row above that Volunteer's name.
6. For example, we begin in C1 with a count of 12 days so far - this was manually entered
7. In cell H5, we see Henry has volunteered 1 day. The total no. of days so far should now be 12+1. Therefore, the number in H1 should be 13.
8. In cell G47, we see Joseph has volunteered 1 day. The total number of days volunteered BEFORE Joseph volunteered is 15 (see cell D43). But now, with Joseph volunteering 1 day, the total no. of days so far should now be 15+1. Therefore, the number in G43 should be 16.
9. what formula l must put in the "Days so far" row (excluding cell C1, which is manually input) to give me the "should be" results predicted in that row? I'm guessing it will be a formula which looks at each row fragment of the "Days so far" row, row by row, right up to the previous cell in that row, all within one formula.
P.S. I just want to leave the "Days so far" row blank, for any columns where there are no volunteers in the "Volunteer" row, so please don't give a formula which inserts zero for days with no volunteer, and then sums the cumulative total.
In cell A1 I have a number. I want a formula that looks at that number and then looks at row C on sheet2 where there are rows and rows of numbers. I want the formula to return the nearest match to the number in cell A1.
View 6 Replies View RelatedTrying to isolate the second number in cell.
If I have 48X144X68 in J10, I need 144.
I tried:
=MID(J10,FIND("X",J10,2)+1,3) which works, but when a cell has 65X50X68, then I get 50X where I only want 50.
The numbers can vary in size (i.e., 1 to 5 digits) but always separated by an X or some letter.
Excel 2003
I am using VLOOKUP to match Account names in two tables.
If the names are made up of letters or letters+numbers the names match.
If the account names are purely numbers the names do not match.
All names are formatted as text.
I have tried using TRIM, numbers still do not match.
I am trying to create a macro (please look the attached excel what I have done), I have already crwated a macro that after 5 seconds is gonna change the background color of the of the cell en function of another cell.
That means if F3:F4 change the background color F8:is going to change the backgorung color also, every 5 seconds. The macro I wrote is also include in the excel attached file.
Now this is my problem... I have a variable cell that is give for D6 which could be A,B,C,D,E,F (Range F2:K2).
If the variable cell D6 is A the background color of F8:F9 should be the background color F3:F4 .
If the variable cell D6 is B the background color of F8:F9 should be the background color G3:G4 .
If the variable cell D6 is C the background color of F8:F9 should be the background color H3:H4 ......and etcetera.
In column A I have a set of Ids that are not unique. In column B I have a set of latlong values for those Ids in column A. In column D I have the unique list of Ids from column A(Removed duplicates from column A & pasted them in column D). In column E, I need the latlong value which has highest frequency for each Id. I tried countif,Frequency and tried mixing them up with various other formulas but it is out of my reach.
View 3 Replies View RelatedI need to find the total number of rows down to the next blank cell (and then perform a function based on that number).
I'm using:
CountA(A1,xlDown)
Situation: I have a raw data import - each record is anywhere from 2 to 9 rows, and I need to move each row in that group into a column.
I would like to use something like:
totalRows = Application.WorksheetFunctions.CountA(Range("A1, xlDown"))
If totalRows = 4 Then
ActiveCell.Offset(1, 0).Range("A1").Select
Selection.Cut
ActiveCell.Offset(-1, 1).Range("A1").Select
ActiveSheet.Paste
etc.
When the entry in a cell is of the format e.g 3,4 is there any way to find the value 3 or 4 in that cell?
Attempts like:
Cells(i, 1).Value = variable (e.g variable=3)
or
Set cell_found = Cells.Range("A1:A10").Find(variable, lookat:=xlWhole)
do not find the cell with the 3 (or 4). The above work fine when 3 or 4 are alone in the cell. Is there anyway to find these values in the cell?
I am trying to find the last cell with data in a spreadsheet once this has been found select all up upto cell A4 and then format these cells into number format to zero decimal places so far I have the following which finds the last cell:
LR = Cells(Rows.Count, "A").End(xlUp).Row
Range(Cells(LR, 1), Cells(LR, "A")).Select
I need a formula to check a range of parts and bring back a value of 0 if matched or the value in another cell if it doesn't match.
Part number H-200-3
Part number H-200-3-A
Part number H-200-3-B
If I enter any of the above part numbers then cell B1 returns 0 if it is a different part number then B1 would need to match cell A1.
I have two spreadsheets.
spreadsheet 1:
Lookup from Order numbers listed from A5:A177.
requested formula in I5: I would like a lookup to sheet 2 based on the order number (F19:F191), to return the cell above the first non-blank value.
spreadsheet 2:
Lookup value:Order number listed from F19:F191.
Data search:AY19:CI191
return the (date) which is in the range above the data search from row AY18:CI18.
I've had a look at few forums but i'm getting mixed responses, having to use index / match / lookup / min / --.
I want to enter a unique ID into an input box which will tell which row that id is available and then it will again ask me which column the cell needs to be highlighted. Once i enter the data, it will then ask me what is the change in data (again via input box). i can then enter the change data and then it stops.
View 1 Replies View RelatedI am building a Workbook which takes data from SheetA and inserts it into SheetB.
Part of the data is only entered when a positive value exists.
I then do an export from SheetB.
The problem is that I need to get the column number and pass it to the cell reference based on the field name in row 1.
Dim sFindstring As String
Dim rFindcell As range
Dim iR As Integer
Dim iC As Integer
sFindString = " Find this string in the cell"
'Using cells find the findstring
Set rFindCell = Cells.Find(What:=sFindString, After:=[A1], LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlPrevious)
'OK so look here
iR = 3
'I am trying to pick up the column number
iC = rFindCell.Column
rFindCell throws an object or with block variable not set error. Is there some property that I need to set.
I have a large amount of data and I'm trying to count how many unique values I have in one column. I also want to know how many times each duplicate appears. I tried using a pivot table but it's not working for me.
I also tried the following formula: =SUM(IF(FREQUENCY(H:H,H:H)>0,1)) but it's not quite working.
Items in Column A1 are calculated by (B2/4+5)*1.4 Items located under the columns 2000, 3000, 4000, etc... 10,000 are calculated by taking the top number, eg 2000/(A1 cell value)+the column B number. 2000/7+0 = 286 (rounded numbers)
I need to find an way to look up for x number (2000,3000,4000, etc...) find the smallest number in that column and then return the value in column A1.
Cell
A1 Number >2000300040005000600070008000900010000
70 2864295717148571000114312861429
84 24236148059971883795610751194
[Code].....
I have attached an example. If I have a set of numbers such as the one attached, is it possible to create a formula that will show me all the combinations of numbers that add up to 55.52? In the attached I have highlighted in different colours all the number combinations that add up to 55.52. The numbers highlighted in blue appear within more then one combination. Is there a formula that can do this for me, instead of randomly adding numbers hoping they add up to 55.52.
View 1 Replies View RelatedI have attached an example. If I have a set of numbers such as the one attached, is it possible to create a formula that will show me all the combinations of numbers that add up to 55.52? In the attached I have highlighted in different colours all the number combinations that add up to 55.52. The numbers highlighted in blue appear within more then one combination. Is there a formula that can do this for me, instead of randomly adding numbers hoping they add up to 55.52.
examples.xlsx
I need a VBA code to find the nearest biggest number and nearest lowest number between the data of D2 to H2. In the attached file, I have mentioned my required output (Column A and B - blue highlighted)
View 2 Replies View RelatedI work for a store and we're migrating to a new Point of Sale system. The new POS uses the entire UPC code while our existing one uses only partial UPCs, so I have to update from the partial to the full. ex. Partial 3378093 - Full 0033780935
The partial UPC will always be included in the full UPC, the difference is the dropped leading zeros (and possibly other numbers) and the check digit number at the end. What I have is a spreadsheet with with two worksheets (Old, New) - one has our old UPCs and other information, the other has the new, full UPCs and more information we'll need. What I want to do is write a function that will search through the full list of new UPCs to find the one with the old UPC inside it and return the full UPC. InStr seems the right function to do this - correct?
The part I'm having trouble with is writing something that will search through the full column of new UPCs using InStr. I've searched through the forum for a similar situation but the few I've found aren't working or appropriate. I don't want to include any code I've written because 1) it doesn't work and 2) it would be way too embarassing!
SAMPLE FILE "error_finder.xlsx (36.5 KB)" attached...
The VP of our company needs me to create a spreadsheet.
For this s/s I need the following:
Imagine 2 sheets in Excel...
sheet1
sheet2
sheet2 has sequential numbers in column1 starting in row2 with the number 1 until wherever..., so cell A2 has number 1, cell A3 has number 2, etc...
Manually, a user has to fill in certain text next to a number.
This for example would look something like this:
_|A| B
-|-|-----------------------------------|
1| | Error-description
-|-|-----------------------------------|
2|1| Whatever the 1st error would be...|
-|-|-----------------------------------|
3|2| Whatever the 2nd error would be...|
-|-|-----------------------------------|
4|3| Whatever the 3rd error would be...|
-|-|-----------------------------------|
5|4|
-|-|-----------------------------------|
6|5|
-|-|-----------------------------------|
and so on...
All this would be on sheet2
In a cell on sheet1 I now need the number from column A displayed, that has the latest entry in column B.
In the example above this would have to be the number 3 in cell A4, because right next to it (in cell B4) is the last entry "Whatever the third error would be..."
Addition: There are several sheets, each sheet stands for one error listed on sheet1 in column A
sheet1 for example would look like this:
_|____A____|_B_|_C_|_D_|
-|---------|---|---|---|
1|_________|833|933|934|
-|---------|---|---|---|
2| error 1 |___|___|___|
-|---------|---|---|---|
3| error 2 |___|___|___|
-|---------|---|---|---|
4| error 3 |___|___| 3 |
-|---------|---|---|---|
In this example, because "whatever error" (cell B2 to B4 on sheet2) was found on press 934 was the 3rd error (cell A4), the number 3 (cell A4) would have to be populated on sheet1 in cell D4.
I am having trouble getting my IF statement to test if the cell contains the text "sale" return "X" if not "Y". I need it to search through the text string in that cell and find a certain word, and if it finds that word, retrn a value. I am really having difficulty with is what symbol or function do I use for the logical test? (i.e. =, <>, MATCH, INDEX?)
View 4 Replies View RelatedI have two sheets, sheet1 and sheet2. I would like it so that every time I click on the tab of sheet2 cell A1 of that sheet displays the row number of the last line in sheet1 that has the value "COST" inside column A, what would the coding look like?
View 9 Replies View RelatedI have an excel file, which contains following data:
Month
Department 1
Wages 10
Expenses 20
Preparations 15
Depreciations 3
All other 7
Transport 10
Total 65
Department 2
is there an easy way to find for example the transport cost of department 2 (=14)?
Cell A1 = 3
Cell A2 = 4
Is there a formula to calculate
(3*4)+(2*4)+(1*4)
I need to multiply every integer less than the number in cell A1 and greater than zero by the number cell in A2. I was thinking factorial, but that's not it... Can't remember from my math days.
I have numbers in b2 to b5 say
10
22
35
50
I have numbers in c2 to c5 say
1000
1580
3000
45000
I have numbers in cells d1 to kq1 (1 to 300) d1=1, e1=2, f1=3 and so on
What I want to do is:
In D2 through to kq2 it puts the number in to the cell that correspnds to a multiple of the number in b2.
That would put 1000 in cells m2,w2,ag2,aq2, ba2 and so on
In D3 through to kg3 it it puts the number in to the cell that corresponds to a multiple of the number in b3
that would put 1580 in cells y3,au3,bq3,cm3,di3 and so on
I have a range of 100 numbers E10:CZ10.
If a 0 (zero) appears in this range to find the number before the number zero.
For example:
In cell AC10 I have the number 20
In cell AD11 I have a 0
I have another chart that I would like to list all the numbers that appear before the zero from the cell range E10:CZ10.
i have a table with multiple codes and quantities along with other info in it. What i need is to take each MATERIAL CODE and its lowest quanity and transfer it to another cell. I have tried using DMIN but can not quite get it. It stopped working after the 6th one.
103057300 -800
103057300 -700
103057300 -250
101789050 50
101789050 -70
101789050 -90
So i want to to take the following quanities that are in this font and put them into a separate cell.