I am trying to find the last cell with data in a spreadsheet once this has been found select all up upto cell A4 and then format these cells into number format to zero decimal places so far I have the following which finds the last cell:
LR = Cells(Rows.Count, "A").End(xlUp).Row
Range(Cells(LR, 1), Cells(LR, "A")).Select
how i can go about finding the next empty row (and select the first cell of that row (column A))? edit: It probably should be noted that there are cells in Columns A through P. There are rows where all and/or just one cell contains data per row. So i cannot use a " lookup" based on a single column.
View 2 Replies View RelatedI need to find the last row of data where there is data in Column F. I then need to select from that row the cells that pertain to A, B, C, D, E, F, G, H, I, J, K, L, & M and then be able to make format changes like increase font size.
I also then want to select A in that same row and put the word Total.
I have multiple tables like the one in the picture and have to duplicate this code for different known ranges.
View 11 Replies View Relatedto update these values via a form in this sheet. I can find the correct row to be edited by entering a value from column A and B. The problem is if I want display the values of that row first and then change it. If I want to change row 10 data how can I bring back the value in ROW 3 AND THE COLUMN VALUE? The next step would be to do the actual update if I want to change ROW 10 to "Ooi" and a sales value of 200?
This is what I have done so far:
Dim myRows As Integer
With Sheets("Mrt")
'Retrieve history information for row
For myRows = 4 To 49
If comboxDay.Text = Range("A" & myRows).Value And textboxdescription.Text = Range("B" & myRows).Value Then
textboxbedrag.Text = Range("C" & myRows).Value
chkBTW_Ja.Value = Range("D" & myRows).Value
txtNota.Text = Range("S" & myRows).Value
End If
Next
End With
Picture attached to show how sheet looks like.
i need a method to find the end value in a row (right side) and select the empty cell to its right to paste data in.
problem is the row where this data is may change so using
limit = (row, col).end(XlRight).Col
I have been trying to format the rows on this sheet to color scale red based on the number of repeat text strings in Column E. Referring to the attached example sheet, '321/312.2/321.3' appears the most times and the goal is to color code the rows it appears in the deepest shade of red, then the next highest occurring string would shade the rows it appears in a lighter shade, etc, in descending order. Our team currently does this across multiple sheets manually everyday and it would be a real time saver if we could get excel to do this automatically.
View 14 Replies View Relatedfile storage
1. Look at the "Days so far" section
2. Ignore cell C1
3. All the other cells in that row are shaded blue. Look at these.
4. Look at the "Volunteer" row - all the cells in that row are shaded blue. Look at these.
5. Wherever a name - any name - appears in the "Volunteer" row, 1 is added to the previous number in the "Days so far" section and the result is displayed in cell from the "Days so far" row above that Volunteer's name.
6. For example, we begin in C1 with a count of 12 days so far - this was manually entered
7. In cell H5, we see Henry has volunteered 1 day. The total no. of days so far should now be 12+1. Therefore, the number in H1 should be 13.
8. In cell G47, we see Joseph has volunteered 1 day. The total number of days volunteered BEFORE Joseph volunteered is 15 (see cell D43). But now, with Joseph volunteering 1 day, the total no. of days so far should now be 15+1. Therefore, the number in G43 should be 16.
9. what formula l must put in the "Days so far" row (excluding cell C1, which is manually input) to give me the "should be" results predicted in that row? I'm guessing it will be a formula which looks at each row fragment of the "Days so far" row, row by row, right up to the previous cell in that row, all within one formula.
P.S. I just want to leave the "Days so far" row blank, for any columns where there are no volunteers in the "Volunteer" row, so please don't give a formula which inserts zero for days with no volunteer, and then sums the cumulative total.
I am building a Workbook which takes data from SheetA and inserts it into SheetB.
Part of the data is only entered when a positive value exists.
I then do an export from SheetB.
The problem is that I need to get the column number and pass it to the cell reference based on the field name in row 1.
Dim sFindstring As String
Dim rFindcell As range
Dim iR As Integer
Dim iC As Integer
sFindString = " Find this string in the cell"
'Using cells find the findstring
Set rFindCell = Cells.Find(What:=sFindString, After:=[A1], LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlPrevious)
'OK so look here
iR = 3
'I am trying to pick up the column number
iC = rFindCell.Column
rFindCell throws an object or with block variable not set error. Is there some property that I need to set.
I have a column with unique identifiers (numeric) that are included in another column. I need to find this number in the column and pull the data from that column into a new one. For example:
Unique Identifier: 28530
Is included in this string: 10.1.8........28530_201_10-....
I need the content from the string pulled into a new column. It seems there would be a LOOKUP that would work, but I'm not able to figure it out.
how does one go about finding a specific valuein a worksheet, then selecting the value in the next column, then pasting the value in a different worksheet?
For example, I want to find a particular person's name in a worksheet, upon finding the name, I want to select the number associated with the person which is in the column to the left of the name. I then want to copy and paste the number in a different worksheet.
I want to enter a unique ID into an input box which will tell which row that id is available and then it will again ask me which column the cell needs to be highlighted. Once i enter the data, it will then ask me what is the change in data (again via input box). i can then enter the change data and then it stops.
View 1 Replies View RelatedHow can you select a column by it's index? For example, if I do the following, I get an error.
Dim Counter As Integer
Counter = 157
Columns(, Counter).Select
I need to write a conditional formula that will look up in a 2nd worksheet the last coloumn with data (note that there will be some coloumns in the row that will have data and some that will be blank, I need the last column for that specific row to be the return result)
View 9 Replies View RelatedSheet2 has columns with dates as headings. I add data under each date as appropriate. I would like a summary page for Sheet1 that contains only the most recent column data from Sheet2 (and other sheets, of course). For instance, if I have dates for columns A-E on Sheet2, but only A and B have data under them, I would like Sheet1 to contain the data in Sheet2!B, but not Sheet2!A because that is old data. Sheet1 will only contain the most recent data while sheets 2 through "n" will have historical data. Attached is an example of what I mean...
View 5 Replies View RelatedI need to write entries into an open spreadsheet with data input on a userform.
i need to use the xlup facility to find the last used row in the spreadsheet, select the next line and then enter the data, but how to return to VBA the actual cell reference that has been selected after doing the xlup and down one row. I need to be able a total potential 31 rows of data from the userform.
I would like to search Column C for an instance of the text "Std. Residual", then cycle through the non blank cells to the right and run some formatting code:
VB:
'this line will be modified so that i cycle through the non blank cells that i have found
For row_cycle = 1 To 7
'not signifcant
If Abs(ActiveCell) < 1.96 Then
Selection.Interior.Color = 255
[Code] .....
I then want to search for the next instance of "Std. Residual" in Column C, do the same again, and so on for the entire Worksheet.
I have data in cell A1 that often changes its number format(from $ to %), can i have the number format change in cell B1 whenever the number format in cell A1 changes?
View 3 Replies View RelatedI have two work sheets I'm using. Sheet1!A column contains a list of customer names like "Smith, John".
Sheet2!A contains the same list of name with additional information found in the row. For example, you will find "Smith, John" in Sheet2!A3 and John's phone number in Sheet2!B3
In Sheet1!B it to find the associated telephone number based on matching criteria from Sheet1!A and Sheet2!A
For example, Sheet2 has the following data.
[Code] ....
On Sheet1 I have the following names. You'll notice some of the names repeat.
[Code] ......
In column Sheet1!B I would like it to scan column A from sheet2 and display the data show in column B. So it would look like this-
[Code] ....
You'll notice some names repeat but it always displays the correct number from Sheet2.
I have a userform that I am using to populate a column with data. I have the following code to find the next blank cell on the first row to enter the data from the first textbox in the userform
ActiveSheet.Range("av1").End(xlToLeft).Offset(0, 1).Value = TextBox1
I was then going to populate the rest of the cells in the column by changing the range "A1" to "A2" and so on. The problem I have is that not all of the cells have a compulsory entry so when the end(xlToLeft) function may not always end in the same column and the data will be staggered.
First Entry
A B C D E
1X
2X
3X
4
5X
Second Entry
A B C D E
1XY
2XY
3XY
4Y
5XY
What I want to do is find the first blank cell in the first row, as that will have a compulsory entry, and then fill the rest of the cells in the same column. So if the first blank cell is D1 i want to go down then D2,D3,D4 etc.
I can do it going across the rows but cannot figure it out using columns.
i have is 3 sheets in the same excel document. Sheet 1 is the mater sheet, which is a compilation of sheets 2 and 3, however the sheet layouts are different.
The sheets consist of a list of names and details. Sheet 1 has all the names in the list, however sheet 2 and 3 only have partial lists that are in a different order from the original list. The details listed next to the names in sheets 2 and 3 are different and hence a straight forward row copy and paste will not work.
What i need is to write a vba script that can take the name from the master list, search sheets 2 and 3 for the name and lookup the variables placed in next to the name, then update the master sheet accordingly, then continue to the next name on the master sheet and do the update again, and so on until all is updated. I have already thought about using lookup functions in excel however there is 1000 names on the list and around 60 details so it would be messy.
I have made the macro that does as ,soon as i open the file, select today's date but only if date is in sheet5... sheet 5 is may so it works. Doing the same job for every sheet in the file.
View 10 Replies View Relatedwhich formulas suitable as i just wending to count a number which is time format as "HH:MM" on at column A to down without a duplicated,
I have suck on it .. What I wanted as exampled :
12:00
12:00
12:01
12:01
12:02
range B1 = 3
I want to know how to find certain String and select the cell it on finding the String.
View 10 Replies View RelatedWhen recording a macro, how would I have it record me searching for a word in a cell, then select the two rows beneath it so that I can hide/unhide the hidden rows?
The reason it has to search for the word in the cell is that with changes above, the rows keep getting bumped further and further down (i.e., a moving target).
I'm having trouble coming up with a formula that will find the first month with a number in the 'Total' row (row 22) without using an array function or VBA. The months are in row 13 and can vary from 1 to a whole lot. The number of line items, column C, will also vary, but I wouldn't expect that to effect any function (aside from changing the row designation). Here's what I put together using an array function: {=MATCH(TRUE,ISNUMBER(D22:L22),0)}
Again, don't want to use an array function. Other people will be using this and when they mess with it, i don't want them asking me why it won't work anymore.
******** ******************** ************************************************************************>Microsoft Excel - Book1___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutM14M15M16M17M18M19M20M21D22E22F22G22H22I22J22K22L22M22=
CDEFGHIJKLM12LineMonths*AROTot13123456789141*********0152**5*6*2**13163**4**3***71740000*****0185*421***5**30196***1***8*9207*4**9**3*16218*********022Total*
8301153711*
75Sheet1*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I have a large database of equipment on one sheet and an input form on another. For inventory control, when a user scans a number into the input form, the main inventory sheet is updated with the current location. I have it working using functions, but I need to do this in VBA. I am looking to do the following;
User enters 2222 on the input form. The code matches 2222 on the inventory sheet, moves the activecell 10 columns and updates a value in that cell. Cell A2343 is "2222" then Cell K2343 is changed to "WAREHOUSE 4". What is the best way to find the match and then select that cell in VBA?
The simple table (attached) represents our problem.
We want the letter in Column-B that corresponds to the last non-zero entry in Column-A. So in the example provided, the answer will be cell B12 which is "L". Also, if there are blanks (rather than zeros) below the last non-zero entry, it still needs to work.
I have a a spreadsheet with content (text) in one cell pr line. The content can be in the range column 1 to 8. I want to make a formula where I get the number of the column where there is content. I know how I can make this by using nested IF's, but are there any better proposal?
View 3 Replies View RelatedI have a set series of numbers as follows:
7550-0101
7536-0130
7538-0131
7535-0128
7536-0126
[Code] ....
I would like to disregard the digits before the hyphen (not always four digits) and check only the values of the last set of digits (also not always 4 digits). I would like to search for the greatest suffix used to find the next available number. In my data above the result would be 132.