I have a column with unique identifiers (numeric) that are included in another column. I need to find this number in the column and pull the data from that column into a new one. For example:
Unique Identifier: 28530
Is included in this string: 10.1.8........28530_201_10-....
I need the content from the string pulled into a new column. It seems there would be a LOOKUP that would work, but I'm not able to figure it out.
The below is an example of some data I have in a workbook ...
Basically I need a formula to look through the data and search for any fails within Column A then I want it to pull the Reason
The Pass / Fail could appear anywhere within the range and we will only get a reason for any fails
A B
1Result Reason
2Pass N/A
3Pass N/A
4Pass N/A
5Pass N/A
6Pass N/A
7Fail System Error
8Pass N/A
9Pass N/A
10Pass N/A
11Pass N/A
I have a set of data in once cell and its strung out. I'm trying to pull the numbers that follow certain words from that data. That's easy enough with the find and mid function for the first one. But after that I have a repeating word (see below) and different numbers that follow it. So I want to pull the second number string after that word, the third and so on.
I've attached an excel file that explains this better.
I have my dummy data, and I have (what I think) is how I want the data to be shown. My friend uses Google Sheets, but I prefer Excel. I am trying to convert the code because I am a stickler for excel. Typically I can convert codes some easily, but this is way beyond me.
For Column A: I want to create a list on sheet 'Setup!' based on ids!D2:D="yes". If that list has duplicate entries, I would like only the first entry to show up, but for the next entries I would like the cell to be blank. (this is important for the next step) For Column C: I want to have the corresponding dates go with the name entry. For Column D: I want to have the notes go with the corresponding date entry. (I believe I can manipulate Column C's code to do Column D myself).
I am also going to upload a data sheet, and an expected results sheet.
unique list.xlsx
I am trying to find the last cell with data in a spreadsheet once this has been found select all up upto cell A4 and then format these cells into number format to zero decimal places so far I have the following which finds the last cell:
LR = Cells(Rows.Count, "A").End(xlUp).Row
Range(Cells(LR, 1), Cells(LR, "A")).Select
I want to enter a unique ID into an input box which will tell which row that id is available and then it will again ask me which column the cell needs to be highlighted. Once i enter the data, it will then ask me what is the change in data (again via input box). i can then enter the change data and then it stops.
View 1 Replies View RelatedI have a large amount of data and I'm trying to count how many unique values I have in one column. I also want to know how many times each duplicate appears. I tried using a pivot table but it's not working for me.
I also tried the following formula: =SUM(IF(FREQUENCY(H:H,H:H)>0,1)) but it's not quite working.
Look up a match on sheet1 from individual cells from sheet2, and if match copy and paste to sheet3, and i need this to be done for every cell in sheet2. Sort of a CTRL-F type of deal but for about 3000 individual cells on sheet2. The sheet1 contains about 10 columms with about 10000 cells all together. so to do this individually its just not posible.
View 5 Replies View Relatedfile storage
1. Look at the "Days so far" section
2. Ignore cell C1
3. All the other cells in that row are shaded blue. Look at these.
4. Look at the "Volunteer" row - all the cells in that row are shaded blue. Look at these.
5. Wherever a name - any name - appears in the "Volunteer" row, 1 is added to the previous number in the "Days so far" section and the result is displayed in cell from the "Days so far" row above that Volunteer's name.
6. For example, we begin in C1 with a count of 12 days so far - this was manually entered
7. In cell H5, we see Henry has volunteered 1 day. The total no. of days so far should now be 12+1. Therefore, the number in H1 should be 13.
8. In cell G47, we see Joseph has volunteered 1 day. The total number of days volunteered BEFORE Joseph volunteered is 15 (see cell D43). But now, with Joseph volunteering 1 day, the total no. of days so far should now be 15+1. Therefore, the number in G43 should be 16.
9. what formula l must put in the "Days so far" row (excluding cell C1, which is manually input) to give me the "should be" results predicted in that row? I'm guessing it will be a formula which looks at each row fragment of the "Days so far" row, row by row, right up to the previous cell in that row, all within one formula.
P.S. I just want to leave the "Days so far" row blank, for any columns where there are no volunteers in the "Volunteer" row, so please don't give a formula which inserts zero for days with no volunteer, and then sums the cumulative total.
I have a main workbook that is meant to summarize data from other workbooks
In Row 6 from column H on I have workbook names in each cell
Column G in all workbooks (including the main one) contains our branch #'s for our offices
For each workbook listed in row 6 , I need to open that workbook (I have that setup with the code below---notice there is an AX.xls that is appended to the file names listed in row 6 in order for the names to match what is in the windows directory)
In the newly opened workbook, I need to, for each value in column G, copy the value from adjacent cell in column H (the dollar value) then search column G of the main workbook for a matching branch and paste the value to the appropriate row under the workbook name column (remember workbook names are in row 6)
The trouble is, for each branch in column G in the newly opened workbook that cannot be found in the main workbook, I need to paste the new branch # at the bottom row of/in column G and the $ value (H column value from the newly opened workbook) to the corresponding row under the workbook name column
Sub OpenWBs()
Dim Rng As Range
Dim WB As Workbook
Dim MyPath As String
Dim lastCol As Integer
Dim newRange As Range
lastCol = Cells(6, Columns.Count).End(xlToLeft).Column
Set newRange = Range(Cells(6, 1), Cells(6, lastCol))
MyPath = "F:AccountingAPAdvertising AccountsLA TimesAgentExtractorCompletedLIST"
For Each Rng In newRange '
Looking for a formula to accomplish the following:
I'm trying to populate cell A31 on a worksheet titled "VolumeTotals" with the data in Cell E23 from a worksheet titled "CurrentCustomers" if the merged cells F3-F22 on worksheet "CurrentCustomers" are equal to the word "Contract".
I am trying to make a sheet that I can make selections from a list of things on one worksheet and have the selections pull through to another worksheet. I have attached a mockup of the data, the ideal outcome and the logic is basically this:
If Cell A = Yes, then populate this cell with Column B Data
Repeating until ALL Cell A = Yes have been reviewed
Is it possible to make every 17th row column A state the same thing without manually inputting it and then would is it possible to get every 17th row column B to pull certain data from other cells in B and put it together?
Example Column A has First Name, Last Name, and Phone. Column B will have the manual inputs.
Then I add another blank row after Phone for Password. The password will be the last name and last two digits of the phone. Is it possible to do this automatically if the other three fields are filled or does it also have to be manually input?
Userform I've created. It's not for inputting data, just for displaying and linking to data.
I have a textbox on a userform that I would like to display exactly what is written in cell C5 of sheet1. I don't want the user to be able to edit it, just for it to display the same as C5. Any better way of doing it than using a textbox that would be good also.
Have numerous values in Col A. Col E extracts a list of unique values from that column.
In Col C, the Col A value has had characters added to it.
Need a formula to count the number of unique values from Col C which contain the same prefix from Col A, and place the result in Col F.
A sample workdook is attached with the desired result shown and highlighted in yellow.
How can I pull data from a specific cell from a closed worksheet in VBA?
Not sure but I think that Workbook("wb1.xls").Worksheet("Sheet1").Range("A2") only works if the worksheet is open.
i need away that will give me the way to pull data from specified place
in txt file to A1 cell in excel sheet3
I have on inventory sheet that has all the data in each cell 2612 to be exact! That changes month to month with deletions.
The format is: Sheet 2
A/B/
334702/UEMR88QX
334703/UEMR85QX
334704/UEMR81QX
334707/UEMR8JQX
The master worksheet has about 5000 items and the (A and B) data are both on it with other data ranging from (A-Y). My question is how do I have a cell look up data and return that it exists or doesn’t exist on the inventory sheet?
Master
A/B/C/D/E/
35/ 465/881676311350/311350/UEMR8ZTU
36/469/881676310722/310722/UEMR8V5V
37/483/881676310924/310924/UEMR8XYU
38/805/881676331096/331096/UEMR8J13
My other problem I need to take that months inventory list and have it look at the master list and return the system number from the master list (B) next to the matching inventory number (C). Allowing me to cross match inventory to master each month and save inventory worksheet each month.
I know I can copy the column and past is as a value so I won’t lose the numbers as the master changes but getting the data onto that months inventory has been a pain.
I'm trying to make a floor plan which shows what seats are available depending on the time it is. So I made sheet1 = to the map (where the seats are located), sheet2 - rows = seat #'s, columns = Time (broken down by half hours). Now i have conditional format to show "t" in red (which means taken), "f" in blue (which means free), and "n" to show in gray (which means not working).
What i need is example - Seat # 200 in sheet 1 to show red, blue, or gray depending on the value in the row that corespond to this seat and the column that corespond to the current time.
I want to pull data from closed workbook based on cell values of open workbook of column B and the source file name is on cell J1. Actually I save monthly files and opening balnce of current month should take vakues from previous month file.
Suppose current month is May 2008. Then Column Column D for May month shold take value from column G of April 2008. For simplicity the previous month’s name and thus source file name will be placed on cell J1.
The code should loop from column B of source file and current May 2008 file and should pull values for only those items which are in the current file in the Column B. Thus those products which are deleted or newly added item in the current item should not copied. Though for new item no name will be thre in the source file but for deleted items the item might be there in the source file but the code should ignore those value.
I have an excel workbook with 2 worksheets. One worksheet shows the MASTER LIST of COMPLETE Customer Names (e.g. ABB Supplies Incorporated). The other worksheet has information on customers but the customer names typed in are incomplete (e.g. ABC Supplies). I need a macro that would look do a comparison of the customer names in the 2nd worksheet to the Master List worksheet and pull the data (complete name, address, etc.) for those that would match (partial match since company name is 2nd worksheet is usually incomplete).
View 2 Replies View RelatedI have drop drown menus that allow you to select 1 of 3 choices and based on those a second set which lists the options for the first three (subset). Now depending on the second value I need to pull a set of x y coordinates that can be of varying length. '
Example
Drop down menu 1 1560, 1669, 1554. Drop down menu 2 1560-1,2,3,4 1669-a,b,c,d. This has been done now lets say I select 1560-1. I need the following to be pulled from a list, the data is a block.
1.00 1.543
1.23 -1.25
0.54 -2.75
This can be of any length.
I have a Workbook (Test 1) with several columns A-S. I'd like to be able to continue to add data into Test 1, and have some of the data pulled into a new Workbook (Test 2). Basically pulling data from Test 1, cols. D, L, J, E, I, C, K, Q and S - into the new workbook Test 2.
Some of the columns in Test 1 have conditional formatting and data validations, but I need the data in these columns to be replicated into Test 2 - without having to copy/paste between the 2 workbooks.
I figured how to do this in Excel 2010, but my office is still using 2007 and I can't seem to get it to work....
I'm holding a Reverse Auction where people pay a dollar to place a bid, BUT the twist is they are giving me a number that they how will be the lowest number but it has to be the only occurrence of that number (greater than 0).
During the party people can guess as much as they want to pay. I think i'll use a spreadsheet with their names in column A and go out in the row with however many cells for how many numbers they guess (so there would be blank cells in the overall range of the whole list if one guy buys 10 numbers and another only 1, for example).
So, i need a cell at the bottom that tells me the lowest number that wasn't guessed more than one time.
I've found how to FIND duplicates and the lowest number but i don't know how to write it so that it discards the duplicates.
I have a column of numbers each have a 0. infront of them (example 0.2346
0.5698). I want to pull the number from the right until it hits the decimal sign. So for the two above the result would be 2346 and 5698
to update these values via a form in this sheet. I can find the correct row to be edited by entering a value from column A and B. The problem is if I want display the values of that row first and then change it. If I want to change row 10 data how can I bring back the value in ROW 3 AND THE COLUMN VALUE? The next step would be to do the actual update if I want to change ROW 10 to "Ooi" and a sales value of 200?
This is what I have done so far:
Dim myRows As Integer
With Sheets("Mrt")
'Retrieve history information for row
For myRows = 4 To 49
If comboxDay.Text = Range("A" & myRows).Value And textboxdescription.Text = Range("B" & myRows).Value Then
textboxbedrag.Text = Range("C" & myRows).Value
chkBTW_Ja.Value = Range("D" & myRows).Value
txtNota.Text = Range("S" & myRows).Value
End If
Next
End With
Picture attached to show how sheet looks like.
I have 2 worksheets (Sheet1 and Sheet2). Sheet 1 contains around 3000 records with multiple fields (columns). Column A contains the ID number. Sheet 2 contains some records with different fields except for the ID number which is common.
I need a macro to retrieve information from sheet1 and copy it to sheet 2 based on the ID Number; i.e the macro needs to get the ID number from sheet2, locate it in sheet1 and copy the data from column D in sheet1 for that particular record and paste it in sheet2.
Is is possible for excel to find a number in a cell and display it in a new cell?
A1 = AWS190B
A2 = AGZ160D
A3 = WGZ080D
Is there a command for excel to display 190 in A2?
B1 = 190
B2 = 160
B3 = 080 (or 80 is fine)
I want to extract the following details into another collumn (bold ) from data in column B1 into C1. The information i want begins with 3 digits with a '/' then other digits follow.
M / AS308 - :308/65588 POUN
S33 / 33 - :133/01504 TR
NI101 - :101/915635 T
N101 - :101/915635
I am in need of a way to pull keywords listed in B2:B10 from text in A2:A10 and then those pulled keywords combined in cell C11.See attached document. So I have colors for keywords in column B and some random text in the column A including the keywords in parenthesis. Is there a way for a formula to find all keywords in A2:A10 and then list them in cell C11 with commas in between.So the result would be one cell C11 showing BLUE,GREEN,BLACK,ORANGE, etc.I have been trying to mess around with index and match and while I could get one to pull up I don't know how to combine it.
Keyword Range.xlsx‎
