How would i loop though a list i have on sheet1 and have it highlight the data on sheet2, everytime i found it?
For example i have a list in sheet1:
cat
dog
mouse
everytime it finds these words in sheet 2, it changes the cell to
Selection.Interior.ColorIndex = 3
I am trying to find a value in a range, then highlight the row that has that value. this is what i have found so far, i just cant get it to work:
Code: [URL] .......
Each cell in Range AL3..AL50000 have text (sentence - description of problem).
Cell AL1 has my search word (i.e. loose)
I would like to search range AL3..AL5000 for word "Loose" - if found highlight every cell where was found - Yellow.
If AL1 is empty - remove all highlights.
Here is what I have so far (patches of codes found in this forum)
Sub FindTextInCell()
Dim ws As Worksheet
Dim myText As String
myText = Sheets("detail_report").Range("AL1").Value
If myText = "" Then Exit Sub
Set Found = Range("AK2..AK56000").Find(What:=myText, LookIn:=xlValues, lookAt:=xlPart, MatchCase:=False)
If Not Found Is Nothing Then
Found.Interior.ColorIndex = 36
End If
End Sub
My code highlights only first found cell and if I type any other search word - highlight from the 1st search does not get removed.
I have two spreadsheets. Spreadsheet 1 has 6 columns and column E has a list of numbers. It runs from E2:E739.
Spreadsheet 2 has 9 columns and column A has the numbers I need matched against. Column A runs from A9:A5027. How can I find the numbers from Spreadsheet 1, Column E that are also in Spreadsheet 2, Column A. Once matched I would like to highlight the ROW on spreadsheet 1 that has a match.
I would like to have a macro that searches a selected area for a number (there may be many of them in the spreadsheet) and highlight it in yellow. Please be noted that I don't only want it to search and highlight the number in its respective order, but also every one of its possible arrangement. To make it easier, please also be noted that all of the numbers I will need to search are only 3 digit numbers.
Refer to the attached document : Highlight Number Desired Results.xlsx
I have a worksheet with lots of data on it, resulting in a very busy layout. I have been using "FIND" to search for various numbers within the spreadsheet, however often times it is hard to see which cell "FIND" selects.
Is there a way to enable Excel to highlight the selected cell? For example could "Find" turn the cell yellow when it finds a match?
I have a spreadsheet with a stock list. Each item has an individual number. I have a code below, which I have doctored from other various sources. The problem I have is that if I search for number '12' the spreadsheet highlights every cell with 12 in (120 121 122 123 etc...) Is there any way I can change the code so that it returns only the 12 and not every cell that contains 12? The current code is as follows:
View 2 Replies View RelatedI have a large spread sheet. I need to find 38 accounts in the spreadsheet, highlight them across the span of the spread sheet and then do a sum if to the side. I need to use this Macro monthly on a new ageing and some months some of the accounts may not be in the ageing.
View 14 Replies View Relatedsee attached sheet. Column A has File Name. Need to highlight the duplicate data as you can see there is 2 duplicate data which i have manually highted ( C19 is duplicate of C12, C83 is duplicate of C84).
View 4 Replies View RelatedI need a macro to find a word in entire workbook and need to highlight it.
View 13 Replies View RelatedI want to identify the 2 minimum valued greater than 0.00% in rows with percentages only. Then identify the 2 maximum values greater than 0.00% in rows with percentages only. The sheet changes in size (rows and columns) each day. C4 Row 4 is a constant starting place if that is necessary. I have been tweaking this code all night, but no luck. I keep getting a highlighted yellow error in editor @ oRg.Find(What:=iMin, _
I also don't know what an oRg is, I am using 2001, that may be the problem.
I have received a workbook containing lists, unfortunately the names are listed in individual cells - several per cell, separated by commas. I need to highlight wherever a particular name occurs without splitting the data from the cell, ie like Find but within the cell.
View 9 Replies View RelatedI have a very large spreadsheet (46,000 rows). There are a couple hundred rows I need to find and highlight, and also insert potentially-linked contract numbers in a second column.
For example:
Column 1: Column 2:
Contract # Linked Contract #
12345 67890
Is there a quick way to do this without using find and replace to highlight all several hundred of these rows? I have an hour and a half until I leave work and my boss wants it today! Compounded is the problem that there are about 100 versions of this spreadsheet I need to do this for.
Is there a way i can have a macro find the unique values in these 3 columns and highlight them yellow.
They should find uniques using all 3 columns, not find them within each column.
I included a file which shows what i start off with and what it needs to look like. Also if it matters the contents in the cells are from links. ( i know that matters because you have to put look in values in the code ).
I have 12,000 rows on my excel spread sheet of data and my average volume for all those days are 17,661,398.6
I noticed that the so called average did not show up not even once in all of the 12,000 rows. Thus I conclude that the average is not normal ? How to find & highlight the most frequently occurring number, the usual, and or the normal numbers?
SM extract 8.21.2013 Cust-sample.xlsx
I want to highlight the cells under System Name (col 1) in sheet 1 that are found in Host (col 1) in sheet 2 "OCPtabvHost"
The text isnt in the same format in the 2nd sheet (it is lower case and has additional text). I need to find the duplicate roots
I'm trying to find some vba code that will find dups on my worksheet and highlight them in a special way: first dup = bright yellow, second dup = bright green, third dup = bright red, and if there is a forth, fifth or sixth dup, then just increment color number to next one, than next, etc...
I would like for the code to run as soon as there is a change on the worksheet (when I finish entering data in a row). I think I already have the right code to do that:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("E9:E10000")) Is Nothing Then
Call dupSearch
End If
End Sub
I tested it out, seems to work as it should.
My major problem is that I need the code to check column F9:F10000 and compare the cells all along that column. That column concatenates 3 other cells in that same row (lastname&firstname&employee#), so if I run my dupSearch on that column only, I should find only real dups, and not just 2 people with the same name.
I also need to make sure it doesn't find empty cells, thinking they are dups. I would like to highlight column A to E of the row that contains the dup, and not just the cell in column F.
I have tried many other codes that I have found on the forum, but none of them work right with what I'm trying to do, and I just don't know enough VBA to make the changes I need.
I have a worksheet with 20+ columns. For this macro, I only need to focus on 4 of them. However, none of these columns are ever in a fixed position so the macro would need to find them by name and NOT by column position. Here they are...
1. Vacation Type (will only have a text value of either "Cold" or "Warm")
2. Vacation Started (will always have a date *x/xx/xxxx)
3. Vacation Ended (sometimes it will have a date '*x/xx/xxxx' and sometimes it will NOT have a date and will be truly blank)
4. Number of Days (currently has ALL truly blank cells)
THIS WHOLE MACRO SHOULD NOT BE CASE SENSITIVE ANYWHERE
Here's what I would like the macro to do...
Scenario 1 - for "Cold" values
Find "Cold" text values in the "Vacation Type" column
"Cold" values WITH a date in the "Vacation Ended" columnIF there IS a date in the "Vacation Ended" column in the same row, put the number of days difference between the "Vacation Started" column and "Vacation Ended" column in the "Number of Days" column.
The amount of days in the "Number of Days" column will determine whether these cells should be highlighted GREY or RED.
A) IF the number of days difference is 7 days or less, highlight the cells in the "Vacation Ended" column and "Number of Days" column RED.
OR..............................
I want to enter a unique ID into an input box which will tell which row that id is available and then it will again ask me which column the cell needs to be highlighted. Once i enter the data, it will then ask me what is the change in data (again via input box). i can then enter the change data and then it stops.
View 1 Replies View RelatedI am trying to compile a staff duty rota which has 3 separate columns of names. I would like to type in name in a cell eg A1 and have all instances of that name in the columns highlighted in red. I would also need an option to remove the highlights as and when required. I am using excel 2007 and I only have a very basic understanding of code.
View 4 Replies View RelatedI'm using the code below to color every row where "MAIN" and string
starting by "FFR0" coexist, but it doesn't work
In a workbook. I have a cell with a hyperlink to different sheet in the same workbook.
I want to make it so, that when someone clicks on the hyperlink and is taken to the cell on the sheet i linked to, that the whole row of data highlights.
The highlight can only be turned on when someone clicks the hyperlink.
Does this require VBA script?
I am using Excel 2003.
I have a spredsheet with names going down column A and then a lot of data in the next 20 columns. It is sometime a challenge to see for which name the data is associated with becuase I have to look across a long row...
Is there a way in Excel, that when you click on a cell, it would HIGHLITE the row that you are in at that moment?
Is there a script to add a boarder or highlight every 5th row in excel?
View 15 Replies View RelatedI need a code that will highlight every other row in a some color.
I would like the macro to start in row 7 and use column A as a reference to know when to stop (last populated row in column A is where it needs to stop).
The rows that get highlighted can all get highlighted in the same color, and the entire row can be highlighted.
The twist to this is that there are hidden rows in the range and I want the macro to disregard those.
I am working on closeouts and I would like the late due dates to be highlighted in three ways: past 30 days, past 60 days, and past 90 days. Also, I would like the highlighted to be disappear when the form is sent..
View 3 Replies View Relatedi have got a spredsheet, with clients names on it and in cell Q i have the clients account number, when iam looking at the clients name i also want to see the number, is there any way to highlight the cell i am on.
What i mean isusing the arrows keys i want to make the row highlighted, is there a way to do this
I am editing a fairly sizeable name, address list and I would like the row highlight bar to extend across the page. For instance, when I click on the row number the highlight bar extends across the row, but when I hit return the highlight disappears and I have to click row by row. I would like the highlight bar to extend across a row and then move up or down with the arrow keys.
View 5 Replies View RelatedBelow is some code I am trying to complete but ot does not ALL work.
I am inserting a row and I want the row to be highlighted.
The insert part is working ok but not the highlight part.
[Code].....
Excel 2003 > In a given row, I need to change the fill-color of the cell in column C if the user changes any value in columns D through Z. How to? Need a VBA code snippet.
View 2 Replies View Related