I have a large spread sheet. I need to find 38 accounts in the spreadsheet, highlight them across the span of the spread sheet and then do a sum if to the side. I need to use this Macro monthly on a new ageing and some months some of the accounts may not be in the ageing.
View 14 Replies
Is there a way i can have a macro find the unique values in these 3 columns and highlight them yellow.
They should find uniques using all 3 columns, not find them within each column.
I included a file which shows what i start off with and what it needs to look like. Also if it matters the contents in the cells are from links. ( i know that matters because you have to put look in values in the code ).
I am trying to find a value in a range, then highlight the row that has that value. this is what i have found so far, i just cant get it to work:
Code: [URL] .......
Each cell in Range AL3..AL50000 have text (sentence - description of problem).
Cell AL1 has my search word (i.e. loose)
I would like to search range AL3..AL5000 for word "Loose" - if found highlight every cell where was found - Yellow.
If AL1 is empty - remove all highlights.
Here is what I have so far (patches of codes found in this forum)
Sub FindTextInCell()
Dim ws As Worksheet
Dim myText As String
myText = Sheets("detail_report").Range("AL1").Value
If myText = "" Then Exit Sub
Set Found = Range("AK2..AK56000").Find(What:=myText, LookIn:=xlValues, lookAt:=xlPart, MatchCase:=False)
If Not Found Is Nothing Then
Found.Interior.ColorIndex = 36
End If
End Sub
My code highlights only first found cell and if I type any other search word - highlight from the 1st search does not get removed.
Im trying to find out if there are any duplicate records in my spreadsheet. See look at the attached. Cell 6745 down is highlighted in green. I want to check this against all the cells above. need to write a formula so that it marks any products in the green section with duplicate (in column I) if they are in fact repeated.
View 2 Replies View RelatedI have two spreadsheets. Spreadsheet 1 has 6 columns and column E has a list of numbers. It runs from E2:E739.
Spreadsheet 2 has 9 columns and column A has the numbers I need matched against. Column A runs from A9:A5027. How can I find the numbers from Spreadsheet 1, Column E that are also in Spreadsheet 2, Column A. Once matched I would like to highlight the ROW on spreadsheet 1 that has a match.
I would like to have a macro that searches a selected area for a number (there may be many of them in the spreadsheet) and highlight it in yellow. Please be noted that I don't only want it to search and highlight the number in its respective order, but also every one of its possible arrangement. To make it easier, please also be noted that all of the numbers I will need to search are only 3 digit numbers.
Refer to the attached document : Highlight Number Desired Results.xlsx
I have a worksheet with lots of data on it, resulting in a very busy layout. I have been using "FIND" to search for various numbers within the spreadsheet, however often times it is hard to see which cell "FIND" selects.
Is there a way to enable Excel to highlight the selected cell? For example could "Find" turn the cell yellow when it finds a match?
I have a spreadsheet with a stock list. Each item has an individual number. I have a code below, which I have doctored from other various sources. The problem I have is that if I search for number '12' the spreadsheet highlights every cell with 12 in (120 121 122 123 etc...) Is there any way I can change the code so that it returns only the 12 and not every cell that contains 12? The current code is as follows:
View 2 Replies View Relatedsee attached sheet. Column A has File Name. Need to highlight the duplicate data as you can see there is 2 duplicate data which i have manually highted ( C19 is duplicate of C12, C83 is duplicate of C84).
View 4 Replies View RelatedI need a macro to find a word in entire workbook and need to highlight it.
View 13 Replies View RelatedI want to identify the 2 minimum valued greater than 0.00% in rows with percentages only. Then identify the 2 maximum values greater than 0.00% in rows with percentages only. The sheet changes in size (rows and columns) each day. C4 Row 4 is a constant starting place if that is necessary. I have been tweaking this code all night, but no luck. I keep getting a highlighted yellow error in editor @ oRg.Find(What:=iMin, _
I also don't know what an oRg is, I am using 2001, that may be the problem.
I have received a workbook containing lists, unfortunately the names are listed in individual cells - several per cell, separated by commas. I need to highlight wherever a particular name occurs without splitting the data from the cell, ie like Find but within the cell.
View 9 Replies View RelatedI have a very large spreadsheet (46,000 rows). There are a couple hundred rows I need to find and highlight, and also insert potentially-linked contract numbers in a second column.
For example:
Column 1: Column 2:
Contract # Linked Contract #
12345 67890
Is there a quick way to do this without using find and replace to highlight all several hundred of these rows? I have an hour and a half until I leave work and my boss wants it today! Compounded is the problem that there are about 100 versions of this spreadsheet I need to do this for.
I have 12,000 rows on my excel spread sheet of data and my average volume for all those days are 17,661,398.6
I noticed that the so called average did not show up not even once in all of the 12,000 rows. Thus I conclude that the average is not normal ? How to find & highlight the most frequently occurring number, the usual, and or the normal numbers?
Figuring out a SUMIF or SUMIFS formula which will clean up some weekly data. I am envisioning a SUMIF formula which looks at the client name in column A in a table and then it will search through the long list of data for all entries for that specific client on another sheet in column "A", for instance. It needs to take into consideration only the encounters which happened between the dates in the table for that client listed in column B & C. The sum will be the column next to the column with each client's name which has a procedure date in between the date criteria's from the table. I have attached an example to better illustrate.
SUMIF Example.xlsx
Most excel/vba books say not to use the sumif function.
I have a very large workbook (9meg) and cant use VBA code as it slows down the interation calculations required.
I have used the sumif function to find and collate unqiue data on different worksheets.
Is there another function that i should be using?
SM extract 8.21.2013 Cust-sample.xlsx
I want to highlight the cells under System Name (col 1) in sheet 1 that are found in Host (col 1) in sheet 2 "OCPtabvHost"
The text isnt in the same format in the 2nd sheet (it is lower case and has additional text). I need to find the duplicate roots
I have a very large spreadsheet where i have orders, product and line status listed. I neeed to find the line staus of each product in production against the order. I'm using an array sumif formula but since the spreadsheet reachs 10000 rows of information I dosn't alway calculate correctly.
ORDERPRODUCTSTATUS
ABCDAPPLEPICKED
ABCDORANGEON HOLD
ABCDPEACHSHORT
ABCDYAMSSTAGED
EFGHAPPLEPICKED
EFGHORANGEON HOLD
EFGHPEACHSHORT
EFGHYAMSSTAGED
Required Result
Order
ABCDAPPLEORANGEPEACHYAMS
PICKEDON HOLDSHORTSTAGED
I'm trying to find some vba code that will find dups on my worksheet and highlight them in a special way: first dup = bright yellow, second dup = bright green, third dup = bright red, and if there is a forth, fifth or sixth dup, then just increment color number to next one, than next, etc...
I would like for the code to run as soon as there is a change on the worksheet (when I finish entering data in a row). I think I already have the right code to do that:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("E9:E10000")) Is Nothing Then
Call dupSearch
End If
End Sub
I tested it out, seems to work as it should.
My major problem is that I need the code to check column F9:F10000 and compare the cells all along that column. That column concatenates 3 other cells in that same row (lastname&firstname&employee#), so if I run my dupSearch on that column only, I should find only real dups, and not just 2 people with the same name.
I also need to make sure it doesn't find empty cells, thinking they are dups. I would like to highlight column A to E of the row that contains the dup, and not just the cell in column F.
I have tried many other codes that I have found on the forum, but none of them work right with what I'm trying to do, and I just don't know enough VBA to make the changes I need.
I have a worksheet with 20+ columns. For this macro, I only need to focus on 4 of them. However, none of these columns are ever in a fixed position so the macro would need to find them by name and NOT by column position. Here they are...
1. Vacation Type (will only have a text value of either "Cold" or "Warm")
2. Vacation Started (will always have a date *x/xx/xxxx)
3. Vacation Ended (sometimes it will have a date '*x/xx/xxxx' and sometimes it will NOT have a date and will be truly blank)
4. Number of Days (currently has ALL truly blank cells)
THIS WHOLE MACRO SHOULD NOT BE CASE SENSITIVE ANYWHERE
Here's what I would like the macro to do...
Scenario 1 - for "Cold" values
Find "Cold" text values in the "Vacation Type" column
"Cold" values WITH a date in the "Vacation Ended" columnIF there IS a date in the "Vacation Ended" column in the same row, put the number of days difference between the "Vacation Started" column and "Vacation Ended" column in the "Number of Days" column.
The amount of days in the "Number of Days" column will determine whether these cells should be highlighted GREY or RED.
A) IF the number of days difference is 7 days or less, highlight the cells in the "Vacation Ended" column and "Number of Days" column RED.
OR..............................
I want to enter a unique ID into an input box which will tell which row that id is available and then it will again ask me which column the cell needs to be highlighted. Once i enter the data, it will then ask me what is the change in data (again via input box). i can then enter the change data and then it stops.
View 1 Replies View RelatedI'm having a little problem with the function Sumif. I have data like this:
Date
0
0
Total
0
78[code]...
I want to some all the Totals that appear before the "End Notification" text. I have more totals after that text and the number of rows are variable.
In my data, I have always 4 totals before that text, so I thought perhaps that the way to do this would be to impose to the sumif function to stop summing after counting 4 totals. I didn't find a way to do that.
I thought a little more on the problem and I find out that the easy way would be to record a macro with the sum if function, where, in the range part, I would do a Find for "End Notification"; and select all the cells to the top of the sheet. The problem is that the macro dont record that part, only the row number.I think I need to turn the range a variable, where the variable is equal to the find selection.
I have a macro[A] that sums a column based on parameters passed to it from another macro[b]
Macro A
Sub SumColumns(varASheetName As Variant, varFormulaCell As Variant, varSumRange As Variant)
Sheets(varASheetName). Range(varFormulaCell).Value = Application.WorksheetFunction.Sum(varSumRange)
End Sub
' Macro B
Sub SumDebtorsStuff()
Call SumColumns("DebtorsRaw", "D10", Range("D21", Range("D65536").End(xlUp)))
End Sub ...........
I need to use a SUMIF formula in a macro. however the columns in the range are variables. I can easily find the columns numbers but I can't find the way to embedded them in the formula. (For example : if the formula is : =SUMIF(A:A,A1,K:K) column "K" may change to to "B").
View 4 Replies View RelatedI am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
View 9 Replies View RelatedI'm having a problem getting this macro to work with the variants that have a letter in them. "A0220" and the like. All of the number only variants are found and highlighted just fine. What do I need to do to get the macro to find the letter ones? Here is the macro I'm working with currently.
View 11 Replies View RelatedCan this be automated?
I have an excel sheet called "Summary Tab" where I highlight specific rows that has the largest variances for the month. And, then within the same workbook I have about 10 different sheets which has more info regarding the accounts hightlighted in the "Summary Tabs".
For example, the following accounts were hightlighted in grey in the summary tab.
-------- Column A
Row 1 -- Training
Row 5 -- Printing Expense
Row 9 -- Travel Expense
Row 12 -- Telephone Expense
Now, i have to highlight the same accounts in Prior Yr, Current Yr, Detail tab...etc (all of the sheets in the workbook has different row for training, printing...etc
I tried recording this but it doesn't work like it should because each month the variance could be different.
i have a loop which runs through column A and column B and if the value of column A is less than the corresponding value(same row index) of column B, then i need to highlight both the cells...
View 9 Replies View RelatedHere's what i am trying to do... I have a workbook with lots of info, i believe there is a way to highlight an entire row and then run a macro that will then collect the info from certain columns (along the specific highlighted row) say, columns A-F and M & P for one example, the collected data will then be copied to a new pre-designed template, and pasted into set cells. The cells that the data will be pasted into will not be along one row though, the pre-defined template will resemble say, an application form Can this be done, I understand macros only at a basic level currently but am trying to understand the VBA way of creating them too now.
View 9 Replies View Related
