I have a worksheet with 20+ columns. For this macro, I only need to focus on 4 of them. However, none of these columns are ever in a fixed position so the macro would need to find them by name and NOT by column position. Here they are...
1. Vacation Type (will only have a text value of either "Cold" or "Warm")
2. Vacation Started (will always have a date *x/xx/xxxx)
3. Vacation Ended (sometimes it will have a date '*x/xx/xxxx' and sometimes it will NOT have a date and will be truly blank)
4. Number of Days (currently has ALL truly blank cells)
THIS WHOLE MACRO SHOULD NOT BE CASE SENSITIVE ANYWHERE
Here's what I would like the macro to do...
Scenario 1 - for "Cold" values Find "Cold" text values in the "Vacation Type" column "Cold" values WITH a date in the "Vacation Ended" columnIF there IS a date in the "Vacation Ended" column in the same row, put the number of days difference between the "Vacation Started" column and "Vacation Ended" column in the "Number of Days" column.
The amount of days in the "Number of Days" column will determine whether these cells should be highlighted GREY or RED.
A) IF the number of days difference is 7 days or less, highlight the cells in the "Vacation Ended" column and "Number of Days" column RED. OR..............................
Take 5 PPE Swabs per Area, Both Shifts. Test various equipment - hands, aprons, sleeves, hats, etc.
What I need is for "Take 5 PPE Swabs per Area, Both Shifts." to be bold and highlighted in gray, but none of the other text. Conditional formatting highlights the entire cell, which won't work.
I have two spreadsheets. Spreadsheet 1 has 6 columns and column E has a list of numbers. It runs from E2:E739.
Spreadsheet 2 has 9 columns and column A has the numbers I need matched against. Column A runs from A9:A5027. How can I find the numbers from Spreadsheet 1, Column E that are also in Spreadsheet 2, Column A. Once matched I would like to highlight the ROW on spreadsheet 1 that has a match.
I would like to have a macro that searches a selected area for a number (there may be many of them in the spreadsheet) and highlight it in yellow. Please be noted that I don't only want it to search and highlight the number in its respective order, but also every one of its possible arrangement. To make it easier, please also be noted that all of the numbers I will need to search are only 3 digit numbers.
Refer to the attached document : Highlight Number Desired Results.xlsx
I have a worksheet with lots of data on it, resulting in a very busy layout. I have been using "FIND" to search for various numbers within the spreadsheet, however often times it is hard to see which cell "FIND" selects.
Is there a way to enable Excel to highlight the selected cell? For example could "Find" turn the cell yellow when it finds a match?
I have a spreadsheet with a stock list. Each item has an individual number. I have a code below, which I have doctored from other various sources. The problem I have is that if I search for number '12' the spreadsheet highlights every cell with 12 in (120 121 122 123 etc...) Is there any way I can change the code so that it returns only the 12 and not every cell that contains 12? The current code is as follows:
I have a large spread sheet. I need to find 38 accounts in the spreadsheet, highlight them across the span of the spread sheet and then do a sum if to the side. I need to use this Macro monthly on a new ageing and some months some of the accounts may not be in the ageing.
see attached sheet. Column A has File Name. Need to highlight the duplicate data as you can see there is 2 duplicate data which i have manually highted ( C19 is duplicate of C12, C83 is duplicate of C84).
I want to identify the 2 minimum valued greater than 0.00% in rows with percentages only. Then identify the 2 maximum values greater than 0.00% in rows with percentages only. The sheet changes in size (rows and columns) each day. C4 Row 4 is a constant starting place if that is necessary. I have been tweaking this code all night, but no luck. I keep getting a highlighted yellow error in editor @ oRg.Find(What:=iMin, _ I also don't know what an oRg is, I am using 2001, that may be the problem.
I have received a workbook containing lists, unfortunately the names are listed in individual cells - several per cell, separated by commas. I need to highlight wherever a particular name occurs without splitting the data from the cell, ie like Find but within the cell.
I have a very large spreadsheet (46,000 rows). There are a couple hundred rows I need to find and highlight, and also insert potentially-linked contract numbers in a second column.
Is there a quick way to do this without using find and replace to highlight all several hundred of these rows? I have an hour and a half until I leave work and my boss wants it today! Compounded is the problem that there are about 100 versions of this spreadsheet I need to do this for.
Is there a way i can have a macro find the unique values in these 3 columns and highlight them yellow.
They should find uniques using all 3 columns, not find them within each column.
I included a file which shows what i start off with and what it needs to look like. Also if it matters the contents in the cells are from links. ( i know that matters because you have to put look in values in the code ).
I have 12,000 rows on my excel spread sheet of data and my average volume for all those days are 17,661,398.6 I noticed that the so called average did not show up not even once in all of the 12,000 rows. Thus I conclude that the average is not normal ? How to find & highlight the most frequently occurring number, the usual, and or the normal numbers?
I'm trying to find some vba code that will find dups on my worksheet and highlight them in a special way: first dup = bright yellow, second dup = bright green, third dup = bright red, and if there is a forth, fifth or sixth dup, then just increment color number to next one, than next, etc...
I would like for the code to run as soon as there is a change on the worksheet (when I finish entering data in a row). I think I already have the right code to do that:
Private Sub Worksheet_Change(ByVal Target As Range) If Not Intersect(Target, Range("E9:E10000")) Is Nothing Then Call dupSearch End If End Sub I tested it out, seems to work as it should.
My major problem is that I need the code to check column F9:F10000 and compare the cells all along that column. That column concatenates 3 other cells in that same row (lastname&firstname&employee#), so if I run my dupSearch on that column only, I should find only real dups, and not just 2 people with the same name.
I also need to make sure it doesn't find empty cells, thinking they are dups. I would like to highlight column A to E of the row that contains the dup, and not just the cell in column F.
I have tried many other codes that I have found on the forum, but none of them work right with what I'm trying to do, and I just don't know enough VBA to make the changes I need.
I thought you can do this in excel but right now I am baffled in how to just highlight text not the whole cell just the text in a certain color in excel?
I want to enter a unique ID into an input box which will tell which row that id is available and then it will again ask me which column the cell needs to be highlighted. Once i enter the data, it will then ask me what is the change in data (again via input box). i can then enter the change data and then it stops.
I have a data base sheet...now i want to find the text,string,word into the database sheet and want the results to search-engine sheet..i can do this with the help of advanced filter but now i m not able to highlit that text what i find in the search criteria cell...
I currently use CDO to email a range as body of an email in the form of a table, is there anyway to highlight the largest numbers in each column? This is how it appears in the email: (just noticed the spaces dont space out into a table like it does on email)
Resolving %88.96% Total PhoneQueue Email F8 Notes AddedDays Worked AVERAGE Leanne Stranks 673 300 286 87 475 14 48
I tried using Conditional Formatting, but for some reason it didn't work. I want a cell to be highlighted and/or bolded when particular text is written. It can be in any cell. This can also include blank cells (if possible within a given area such as 20 cells by 20 cells)
I've got a large Excel table that's full of names and e-mail addresses - it's a report of e-mails that merges some data from two systems we use; a registration form and a database. We want to clean up the data so it only lists folks who 'registered' (it's not always BOTH people listed - sometimes it's only one!) - and the best way to do that is to take the information from a specific column in each row, see if it exists elsewhere in the row and clear the information that doesn't match.
For example: -A----------------B------------------C--------------------D--------------E------------------F-------------------G- John ---------- Smith -------- js@email.com -------- Jane -------- Smith --------- js@email.com ------ John Richard ------ McGee ---------j@email.com-----------Jim----------Samename ----jsn@email.com-------Rich Mary-----------Ladyface ------ms@email.com--------Steve -------Smith ----------ss@email.com-------Steve
Ideally, for each row I'd like to search A and D for the string from column G. If it finds it, the cell and the two cells to the right are fine - but everything else is 'cleared' (not deleted).
So the above table would look like: -A----------------B------------------C--------------------D--------------E------------------F-------------------G- John ---------- Smith -------- js@email.com --------------------------------------------------------------- John Richard ------ McGee ---------j@email.com-----------------------------------------------------------------Rich -------------------------- -------------------------------Steve -------Smith ----------ss@email.com-------Steve
I would like to find a way that will look on a worksheet for a specfic word and highlight all the rows that contain this data.
Column A - Has the wording "JOB" & "WORK"
I want this to look down column A find all the rows with the word "JOBS" and just highlight them rows, i dont want a highlight like conditional formating but a highlight like when you click on the entire row.
What i want to do is highlight all row instances where that row column10 has the text "Roller" . All i can see is the forumular =$J1="Roller" ive tryed to select just the single cell J and tryed the whole row and a range. Though i get a error message about =-+ quotation ect.
I perform a =Find(word,range) for certain keywords in text strings. Is there an easy way to have excel highlight the words within the string so i can easily identify its location? The text string might contain more than one keyword.
I have data in columns A and B, Column A has dates, column B has text
I am wanting to highlight text in column B in a colour if date in column A is more than 10 days since date in column A on previous occurrence of text in column B
