code that will go to a cell in Sheet1 column A that has the same or closest value to cell B11 in another workbook. The number values in the column are to three decimal places and the run in order down the column from lowest value to hightest.
View 6 Replies(I am using Excel version 14.0.7106 and MS Office Professional 2010.)
I have a macro in which I have named a range of numbers in a spreadsheet, used the "find" function to find a particular number in that range, and now would like to copy some information into a cell in the same row as the found number. However, when I try to move over to the cell that I'm copying to, it only goes to the 1st row in the range that I have defined.
Here's the portion of code I think you need to see. Everything works...it finds a match...but then I don't know what to do from there to get the information to the correct row:
'Grab the 1st project number
Range("C8").Select
Do Until ActiveCell.Value = ""
If ActiveCell.Value "" Then
prjnum = ActiveCell.Value
Selection.Offset(0, 8).Select
[Code] ..............
I imagine this is pretty simple but for the life of me I can't figure it out. Here's what I want to do...
Find MIN in Column F
After finding the MIN in F (let's pretend F222 is the current min)
Show the text in the field next to it (in this case display text from E222)
I have a workbook with 2 sheets - [Names] has with a list of Staff Ids column B, [Access] has a list of their system acces - with their staff ids in column A and access in F (There could be more than 1 type of access),
I am looking to create a code that :
For each ID in [Names] B lookup in [Access] A
if found create a string with value in F ( so I have a list of all access )
And paste into F in [Names]
I have tried all sorts of things and just can't get it working.
how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.
I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.
CREATE TABLES LIKE BELOW?Column A Column B Column C
March 1, 2008Saturday
March 2, 2008Sunday
March 3, 2008Monday
March 4, 2008Tuesday
March 5, 2008Wednesday ...................
How to correct my formula because it does not work?
Here the formula: =COUNTIFS(Data!C2:C24005,A17,Data!M2:M11149,"<=0")
I need to insert the formula in column C (Findings tab) which counts the rows in Column M (tab named "Data") that equal A17 (Column A in "Findings" tab) and which are less or equal zero. In addition if I drag the formula down I want to only the values be entered in highlighted in blue cells in column C (SKUs With Zero Sales in "Findings" tab) and empty cells in not highlighted cells. I attached images of these two tabs: Data and Findings.
I have a worksheet size roughly 100 * 400 cell. there is roughly 100 cells filled with RED color and with different value.
When i used FIND ALL format - RED, I can locate the cell location and the cell value. And I wish to copy these 2 info onto a new sheet so that on the new sheet, I can create a hyperlink and easily access to the location of the RED cell.
However, in FIND and REPLACE, i have a list of results on what I want. But i cannot copied the information out. So is there anyway to copy it out or to achieve what i want?
For eg.
RED value
cell
50
A3
87
D71
251
AQ5
and so on.
I am creating a macro to automate data analysis for work, but I've become stuck.
I need to find the coordinate of the first cell in a column with word "reserved" or "extended" contained in the cell, and then assign the row number of that coordinate as a variable to use for moving data around. Basically, I want something like VLOOKUP, but instead of returning a value, I want it to return the coordinate.
I've sent out a survey asking people to sign up for one of two groups, A or B. I have a table with a long string of responses, with the name in column A, and in columns B or C there is an X that shows whether they have chosen Group A (column B) or Group B (column C)
I am trying to write a bit of code where it would paste the names into a new table with the headers Group A and Group B. Here is what I have pieced together so far:
Sub Create_Groups()
For i = 2 To Range("B2").End(xlDown).Column()
If Range("B" & i).Value = x Then
[Code].....
I am trying to write a macro that will make the bottom cell in a column equal to the top cell. The top cell will not always be in the same row and there won't always be the same number of cells.
View 1 Replies View RelatedI have a sheet in Excel 2004 for Mac that is a patient list with over 2000 patients. I need a rule that will compare values (patient IDs and responsible party ID) in two adjacent cells, if the values are different, to delete the entire row. The goal is to get rid of patients (rows) that are not the responsible party (responsible party ID).
View 3 Replies View RelatedI have two cells, both of which have drop down lists for options 'a' & 'b'. When one equals 'a' the other should be restricted into only saying 'b' and vice versa. I would also like the user to be reminded that he can only select 'a' once from the two menus. Ideally I would like to do this in a formula rather than VBA?
View 2 Replies View RelatedSimply need a cell to count another cell is equal to certain value.
For example if B3 has a value of 6 then I need J3 to equal 1 or if B3 is equal to 3 than I need G3 to equal one. I tried the the COUNTIF but I am sure i am using it incorrectly.
I would like to create a VBA code where it will delete the entire column if the cell value is equal to value in D2
For example:
Sub Delete_Columns()
Dim rng As Range, cell As Range, del As Range
Set rng = Intersect(Range("G2:S43"), ActiveSheet.UsedRange)
For Each cell In rng
If (cell.Value) = D2 _
Then
If del Is Nothing Then
Set del = cell
Else: Set del = Union(del, cell)
End If
End If
Next cell
On Error Resume Next
del.EntireColumn.Delete
End Sub
======
But I think this line is wrong but I am not sure how to fix it - If (cell.Value) = D2 _
I have a spreadsheet with some cells which return values using INDEX and MATCH to bring back the entire details of a person based on there membership number. However I require the comments to be attached with the returned values. The comments have there image in, rather than just text.
I have found some answers with vba, which do the process, however you had to manually enter the cell, from which the comment was to be copied from, into a pop up box. This involved finding the box myself to then select the box to take the comment from. In doing this I had found and read the comment, which is the is the process I'm trying to bypass.
I've been pounding away at a project for two days trying to determine a way to identify a solution, to no avail.
Here is some experimental code. Under the assumption that in Column "A", every fifth line contains some text (a, b, c, etc) I want to place a function in column B that would identify the closest occupied cell above and to the left of the cell containing the function. The sub achieves this, but the function has a problem because of the Activecell line. Is there a way to identify the location of the cell containing the function to act as a reference point for the range?
Sub find_last_heading()
Application.ScreenUpdating = False
x = ActiveCell.Address
ActiveCell.Offset(0, -1).Select
last_heading = ActiveCell.Text
Do Until last_heading ""
ActiveCell.Offset(-1, 0).Select
last_heading = ActiveCell.Text
Loop
MsgBox last_heading
Range(x).Select
End Sub
Function cathead(Optional reference)
Dim cell
I need to identify rows where the contents of a given cell are equivalent to the cell below. I have managed to get this working based on iterating through the cells and selecting them both for cutting.
However it doesn't work effectively: It seems to be leaving blank lines in the original sheet and further fails after the first execution. I would be grateful for any suggestions on a good method to perform the following operations:
(1)to compare the cell with the cell below
I have used
If cell = cell.Offset(1, 0) Then
(2)to act on the rows for the two connected rows
Sub Test4()
' Loop through rows
Dim TheExtract As String
Dim cell As Range
'Application. ScreenUpdating = False
For Each cell In Worksheets("Sheet 1"). _
Range("A1", Worksheets("Sheet 1").Range("A65536").End(xlUp))
TheExtract = cell
If cell = cell.Offset(1, 0) Then
cell.Rows("1:2").EntireRow.Select
Selection.Cut
Sheets("Test").Select
ActiveCell.Offset(3, 0).Rows("1:1").EntireRow.Select
Selection.Insert Shift:=xlDown
End If
Next cell
'Application.ScreenUpdating = True
End Sub
Is there a standard way across all Excel formulas to have the cell location returned rather than the value of the cell itself?
In other words A33 instead of "52" (with A33 being the cell that contains "52")
Increment all cells located in Column H up by one (the one above it) cell Except for the header cell (since its the header)(H1),
H2 will always be a blank due to the make up of my database so that will not cause the header to be re-written.
Column H is not an entirely filled column and some cells are empty (if this info was needed in optimizing the code),
Im seeking the quickest and easiest way of implementing this since the database is very large.
I have a monthly forecast document that is updated by an operator monthly. At the end of the month, the operator presses a "Copy Accrual" macro that copies accruals for the month and stores them on a seperate tab. After sending the document back to the Finance team (necessary step due to software complications), Finance will send the operator back an updated file at beginning of next month. The operator than presses a "Paste Reversal" macro that is supposed to input the negative of the accrual stored in the seperate tab. The problem is that it is posting as the same value (not negative of value). I tried recording a Macro to fix this, but it did not work. An example of the code that came up with is:
Worksheets("Weekly Forecast").Select
Range("B9").FormulaR1C1 = "=-Accruals!RC[-4]"
Range("H9").Select
Selection.Copy
Range("H10:H33").Select
ActiveSheet.Paste
Thoughts on what to do? I think the two things that are throwing me off is the negative, and moving between the different sheets.
I need to be able to select a checkbox on my form and when selected, fill data from other cells on the form to other cells. Here is what I have so far
Sub CheckBox1_Click()
If CheckBox1.Value = True Then
Cell(F13).Value = Cell(B13).Value
Else If CheckBox1.Value = False Then
'do nothing
End If
End Sub
But it does not work I get a compile error on the: Cell(F13).Value = Cell(B13).Value
why when I linked (this cell = to this cell), I get the location of the cell rather than the value? ='[Travel Expense-Mar 09.xls]AAA-expenses!$D$4.
View 2 Replies View RelatedI need a function(s) that can indicate the current cell column and row in two different cells.
e.g.
Let's say in Cell A1 should indicate the column of current selected cell and B1 indicates the row of current selected cell.
A1 would read - 7 and B1 would read X if the current cell is at X7.
I do not know VBA. If you give VBA solution, please give me link on how to activate the codes.
What I have is a sheet that checks for the current date when it opens, if the day is a Thursday (payday) then it does stuff. What I am having an issue with is setting a cell equal to another cell by formula, but rather than using the cell reference itself, sheets.cell, I have that cell in a variable Var6. When I run the code I am getting an application or object defined error.
The variable set is as follows:
Var6 = "Budget!AI26"
Formula ....
I am looking for a way for a cell to equal another cell but the cell that it looks at is controlled via another cell.
So, for example, cell A1 I type in “E5” and this tells cell B1 to display the contents in cell E5.
Code:
If ActiveCell.Value = "B5 in Sheet 2" Then
How do I define the search for B5 in sheet 2?
I found this not to work:
Code:
If ActiveCell.Value = Sheets(2).Range("B5") Then
I'm doing a spreadsheet where there is ten cells or top ten positions. Where there is one sheet for where the ten values and another sheet with cells that might or might not match the other sheet. For instance.
If any cell A1 on sheet 1 matches cell A1 on sheet 2 Then give cell A15 the value of 10. The If cell A2 on sheet 1 matches A2 on sheet 2 Then add another 10 giving A15 a total of 20. And so on up To A10. Then If it doesn 't match exactly lets say If cell A4 on sheet 1 match cell A2 the Minis 4 from 2 giving you 2 Then minis 2 from 10 giving 8 While still totaling In cell A15, which would equal 18 now.
Is there any way to use the offset formula in reference to the location of another cell?
Here is a simplified version of my problem:
Sheet1!A1 refers to Sheet2!A1.
Sheet1!B1 refers to Sheet2!D1.
Sheet1!C1 refers to Sheet2!E1.
Is there any way that I can say that Sheet1!A1=Sheet2!A1 and then use the offset formula based on the location referenced in Sheet1!A1? The cells being referenced are merged cells one column wide and varying rows long, so there is no real pattern to follow except that the corresponding cells (the ones that I want to use the offset formula on) are all taking up the same amount of rows and are an equal amount of columns over (Sheet1!B1 refers to 3 columns over from Sheet2!A1, Sheet1!B1 refers to 4 columns over from Sheet2!A1). The spreadsheet is a fairly complex one and it would be much cleaner and less likely to have any mistakes if I was not referencing each cell individually.
I have received a spread sheet with all the data in column A. It follows the format of A1 = Name, A2 = Email, A3 = Name, A4 = Email, etc. for over 800 entries. What I need to do is etract all the email addresses and place them in column B alongside the Name. I don't have any experience with Makros and tried to use one but kept deleting the wrong data.
View 5 Replies View RelatedI have a row b1, b2, b3, b4, b5 etc. I need to change it to c1,,c2,c3,c4,c5 etc. Is there a fast easy way to do it. I know about $ but I'm past that.
View 6 Replies View Related