I need to be able to select a checkbox on my form and when selected, fill data from other cells on the form to other cells. Here is what I have so far
Sub CheckBox1_Click()
If CheckBox1.Value = True Then
Cell(F13).Value = Cell(B13).Value
Else If CheckBox1.Value = False Then
'do nothing
End If
End Sub
But it does not work I get a compile error on the: Cell(F13).Value = Cell(B13).Value
I have a worksheet which includes in column A a date in the format dd/mm/yyyy what I would like to do is have a checkbox control on the same row (and this would be the same for all the rows on the this worksheet) and when it is checked it updates the value of a cell on another worksheet within the same workbook with the date from column A. i sort of know how to do it on an individual basis but was wondering what code could be applied to a 'finished editing' button which would then check the state of the checkboxes on the sheet and update the values on the other sheet. I'm afraid my knowledge of VBA is poor when it comes to the logic of things...
View 2 Replies View RelatedI want to add a checkbox that when checked, copies a value (E3) in the row and pastes it into another cell on the same row (G3). I would also like for it to be cleared when unchecked.
View 8 Replies View Relatedcode below whould return value "a" to specified range(s) The cells are formatted Marlett, 10pt, black, bold, center. Should return a nice tick mark to the specified range if selected shape has value of 1. I double chk'd the name of the shape referred to in code and it is correct Yet value of "a" is not returned, though the chkBox is "ticked". What else can I check?
Option Explicit
Sub cv_ReviewCheckBoxes()
Dim wbBook As Workbook
Dim wsNotesLoose As Worksheet
Dim wsCoinRolled As Worksheet
Dim wsCoinLoose As Worksheet
Dim wsSummary As Worksheet
With Application
.Calculation = xlCalculationManual
.DisplayAlerts = False
. ScreenUpdating = False
End With.........................
I have a command button and ten checkboxes - one for each row of a list. I need a macro that will delete the rows of every checked checkbox when I press the command button.
The list starts in row 3 and continues to row 12. Checkboxes are checkbox1 for row 3 to checkbox10 for row 12.
I have a code in my workbook that Runs another ceo on close. It is:
Private Sub Workbook_BeforeClose(Cancel As Boolean)
EmailOFA
End Sub
What I would like to do is have a checkbox that if checked then this code will NOT run. Can this be done?
In a perfect world what would happen is that once an e-mail was sent once then the checkbox would automatically be checked so that there is no possibility of OFA being e-mailed twice with the same info.
Is it possible to have a message box pop up when a checkbox is checked?
I tried the code as per file attached but cannot work; It requires a direct input into the cell.
When I check the box, I would like the autofilter to come on and select a range & criteria which I have managed. When unchecking the box, the data returns back to normal but the filter stays on the range. When I now check the box with the filter on, the code does not work. I need the filter to stay on if already on.
View 4 Replies View RelatedI am attempting to write a program using a form with multiple checkbox buttons, which will highlight cells based on whether the checkbox is checked (highlighted) or not checked (no formatting). I can get it to highlight fine, but I cannot find a way to determine with code whether or not the checkbox is actually checked, so that I can have the program unhighlight when the box is no longer clicked.
I'm not entirely sure how to further explain that so I will use an example. Imagine a checkbox which can show a window when "checked" and when " not checked" hides the window. I am able to get the window to appear in the first place, but am not certain how to hide the window once the user presses to uncheck the checkbox button. If that is not clear let me know and I'll explain it more indepth as I am not entirely certain how to explain it.
If cells A1 to A10 are filled with content and from range B1 to B10, only B3 and B7 are filled with content, I want Excel makes a string without spaces, just from the rows which have been filled in column A and B.
For example:
A B
1 car
2 tree
3 money tree
4 fruit
5 ball
6 food
7 water park
8 bread
9 joke
10 boat
The string I want Excel generates should be: moneytreewaterpark
So I need all the words in one string but Excel has to exclude every value from a row if the cell in column B is not filled with content. If the string is generated, is it possible to make an hyperlink from this string and open automatically in internet browser?
I have a workbook with a report on Sheet1. If the checkbox in column N is checked, I need the data from that row (column A-S) to be cut and pasted on the next available row on Sheet2. I am still new to VBA/macros. Would this be better if I made a button to update the sheet every morning or could it be automatic when the checkbox is checked (preferred).
View 6 Replies View Related- I have 2 checkboxes and I need run macro, if one of this checkboxes are checked (if checkbox1 then run macro, if checkbox2 then run macro2)
- If this checkbox is checked run macro every "xy" minutes, and this "xy" is written in cell I1 (for checkbox1) or I2 (for checkbox2)
I add my excel for better understanding
Lets keep it simple. I have a userform. On the userform are 4 checkboxes.
Checkbox1 is checked by default, the others are empty.
On command click I need to pass the values to a called sheet.
I am creating a main worksheet (Legend) in which information will be entered and then populate to other areas (worksheets) within the workbook. I would like to create a print macro - that will run and print all the worksheets that we have selected on the "legend" page. These worksheets would have been selected by ticking a check box.
My question is how to associate a check box to a worksheet? For example - the second worksheet is named " Schedule A" 3rd "Schedule B" and so on.
- The check boxes will be name schedule A, Schedule B and so on.
- I would like to associate (link) the checkbox Schedule A with the Worksheet of the same name. Then when this checkbox is selected, and the print macro runs it will print the worksheets that are selected.
I am working on a spreadsheet where multiple inputs are entered by a user in certain cells and ranges. I would like to block the ability to enter values in a certain range based on the condition of a check box in the spreadsheet. I do not want to delete or hide the range. Does anyone know a simple command to either allow or not allow input in certain cells/ranges?
View 3 Replies View RelatedI need to copy all the cells to a "new worksheet" if the checkboxes are checked.
I have thousand of cell in here but i just narrow it down in this example.
example:
A B C D E F G
21 22 23 24 25 26 checked
31 32 33 34 35 36 unchecked
41 42 43 44 45 46 checked
51 52 53 54 55 56 unchecked
there is a command button in here that when it was click it will open a "new worksheet",
what I need to see in the new worksheet is this:
A B C D E F
21 22 23 24 25 26
41 42 43 44 45 46
I have a userform with a CheckBox and a ListBox. Is there a way to have the CheckBox to automatically get checked if a selection is made in the listbox?
View 9 Replies View RelatedI have a series of checkboxes, we'll say checkbox 1-5. These are all listed on a sheet called products.
If for example you select check boxes 1,3 and 5 I need those to then be listed in a column in that order on another sheet called purchased.
If I went back and then uncheck 3 and check 4 then purchased would be updated.
I understand that if you take a cell and name it P1 for instance..and then on another sheet enter =p1 in a cell that they will update and share data, but I dont know how to pull from a check box..nor do I know how to assign a row of cells to accept multiple and changing information from those checkboxes.
I have a userform where the textbox already pulls data from a worksheet. I have a checkbox next to the textbox, If the checkbox is true it finds the textbox value on a worksheet and using Offset it inserts "yes" in the next cell.
View 6 Replies View RelatedI have been using different keywords to find what I need. I have 3 checkboxes: cash, amex, other. I have a subtotal cell. When the appropriate checkbox is checked, the amount from the subtotal cell will auto go to the cell next to the checkbox. Is this VB?
View 6 Replies View RelatedI have a multi-worksheet workbook that has many forms control checkboxes throughout it. I'm looking for some VBA that will change the background (fill) color of ALL the checkbox when it is checked (True). I've seen code for a single checkbox, but not multiple/all boxes. I know just enough VBA to be dangerous, but I'm up to learning anything new.
View 3 Replies View RelatedI have an Excel 2010 workbook with many worksheets using hundreds of Form Control (not ActiveX) checkboxes. I need a bit of VBA to change Checkbox background color of each checkbox whenever the user checks the box. I assume this needs to be a click event? I don't even know the Checkbox property name I need to change I'm learning VBA as quick as I can
View 4 Replies View RelatedHow to correct my formula because it does not work?
Here the formula: =COUNTIFS(Data!C2:C24005,A17,Data!M2:M11149,"<=0")
I need to insert the formula in column C (Findings tab) which counts the rows in Column M (tab named "Data") that equal A17 (Column A in "Findings" tab) and which are less or equal zero. In addition if I drag the formula down I want to only the values be entered in highlighted in blue cells in column C (SKUs With Zero Sales in "Findings" tab) and empty cells in not highlighted cells. I attached images of these two tabs: Data and Findings.
I have this worksheet with 2 buttons and 2 textboxes.the first button is named search literally to search the items inputted in the textboxes and the second button is clear which clear all the inputted items in the textboxes and the search field. I manage to code those things however I have a main problem. How am I suppose to linked a checkbox with those items?
For example I searched this particular item so the checkbox corresponding to that item must show up in the left most column of it. and if I searched multiple items those checkboxes must show up too. I am having a hard time coding and trying since I am new in vba. I also attached a sample worksheet. I am using excel 2007.
Search.xlsm
I am trying to write a macro that will make the bottom cell in a column equal to the top cell. The top cell will not always be in the same row and there won't always be the same number of cells.
View 1 Replies View RelatedI have a sheet in Excel 2004 for Mac that is a patient list with over 2000 patients. I need a rule that will compare values (patient IDs and responsible party ID) in two adjacent cells, if the values are different, to delete the entire row. The goal is to get rid of patients (rows) that are not the responsible party (responsible party ID).
View 3 Replies View RelatedI have two cells, both of which have drop down lists for options 'a' & 'b'. When one equals 'a' the other should be restricted into only saying 'b' and vice versa. I would also like the user to be reminded that he can only select 'a' once from the two menus. Ideally I would like to do this in a formula rather than VBA?
View 2 Replies View RelatedSimply need a cell to count another cell is equal to certain value.
For example if B3 has a value of 6 then I need J3 to equal 1 or if B3 is equal to 3 than I need G3 to equal one. I tried the the COUNTIF but I am sure i am using it incorrectly.
I would like to create a VBA code where it will delete the entire column if the cell value is equal to value in D2
For example:
Sub Delete_Columns()
Dim rng As Range, cell As Range, del As Range
Set rng = Intersect(Range("G2:S43"), ActiveSheet.UsedRange)
For Each cell In rng
If (cell.Value) = D2 _
Then
If del Is Nothing Then
Set del = cell
Else: Set del = Union(del, cell)
End If
End If
Next cell
On Error Resume Next
del.EntireColumn.Delete
End Sub
======
But I think this line is wrong but I am not sure how to fix it - If (cell.Value) = D2 _
I have a spreadsheet with some cells which return values using INDEX and MATCH to bring back the entire details of a person based on there membership number. However I require the comments to be attached with the returned values. The comments have there image in, rather than just text.
I have found some answers with vba, which do the process, however you had to manually enter the cell, from which the comment was to be copied from, into a pop up box. This involved finding the box myself to then select the box to take the comment from. In doing this I had found and read the comment, which is the is the process I'm trying to bypass.