Tracker
HOME    TRACKER    Excel

# Multiple Sum If A Cell Value Equal Another Cell

## I'm doing a spreadsheet where there is ten cells or top ten positions. Where there is one sheet for where the ten values and another sheet with cells that might or might not match the other sheet. For instance. If any cell A1 on sheet 1 matches cell A1 on sheet 2 Then give cell A15 the value of 10. The If cell A2 on sheet 1 matches A2 on sheet 2 Then add another 10 giving A15 a total of 20. And so on up To A10. Then If it doesn 't match exactly lets say If cell A4 on sheet 1 match cell A2 the Minis 4 from 2 giving you 2 Then minis 2 from 10 giving 8 While still totaling In cell A15, which would equal 18 now.

Related Forum Messages:
Delete Rows Where Cell Doesn't Equal Adjacent Cell
I have a sheet in Excel 2004 for Mac that is a patient list with over 2000 patients. I need a rule that will compare values (patient IDs and responsible party ID) in two adjacent cells, if the values are different, to delete the entire row. The goal is to get rid of patients (rows) that are not the responsible party (responsible party ID).

Last Occupied Cell To The Left And Equal To Or Above Current Cell
I've been pounding away at a project for two days trying to determine a way to identify a solution, to no avail.

Here is some experimental code. Under the assumption that in Column "A", every fifth line contains some text (a, b, c, etc) I want to place a function in column B that would identify the closest occupied cell above and to the left of the cell containing the function. The sub achieves this, but the function has a problem because of the Activecell line. Is there a way to identify the location of the cell containing the function to act as a reference point for the range?

Application.ScreenUpdating = False
ActiveCell.Offset(0, -1).Select
ActiveCell.Offset(-1, 0).Select
Loop
Range(x).Select
End Sub

Dim cell

Identify Rows Where A Given Cell Is Equal To The Contents Of The Cell Below
I need to identify rows where the contents of a given cell are equivalent to the cell below. I have managed to get this working based on iterating through the cells and selecting them both for cutting.

However it doesn't work effectively: It seems to be leaving blank lines in the original sheet and further fails after the first execution. I would be grateful for any suggestions on a good method to perform the following operations:
(1)to compare the cell with the cell below
I have used

If cell = cell.Offset(1, 0) Then

(2)to act on the rows for the two connected rows

Sub Test4()

' Loop through rows

Dim TheExtract As String
Dim cell As Range

'Application. ScreenUpdating = False
For Each cell In Worksheets("Sheet 1"). _
Range("A1", Worksheets("Sheet 1").Range("A65536").End(xlUp))
TheExtract = cell
If cell = cell.Offset(1, 0) Then
cell.Rows("1:2").EntireRow.Select
Selection.Cut
Sheets("Test").Select
ActiveCell.Offset(3, 0).Rows("1:1").EntireRow.Select
Selection.Insert Shift:=xlDown
End If
Next cell
'Application.ScreenUpdating = True

End Sub

Cell To Equal Another Cell If CheckBox Checked
I need to be able to select a checkbox on my form and when selected, fill data from other cells on the form to other cells. Here is what I have so far

Sub CheckBox1_Click()
If CheckBox1.Value = True Then
Cell(F13).Value = Cell(B13).Value
Else If CheckBox1.Value = False Then
'do nothing
End If
End Sub

But it does not work I get a compile error on the: Cell(F13).Value = Cell(B13).Value

Sum Same Cell Across Multiple Worksheets
I have about 100 worksheets in my excel workbook and each sheet is identical. I would like to create a control sheet that would add the cells of the different worksheets together and place it in the control. I tried doing it manually but found out quickly that it would take forever since I have a about 10 cells that I need to put on the control sheet. For example on the control sheet in J11 I want to put in: ='1'!J11+'2'!J11......'100'!J11

Sum Of Multiple Cells And Return It To One Single Cell
I'm trying to take the sum of multiple cells and return it to one single cell using the Vlookup

For Example I want to match the ID numbers from one spreadsheet and use the list of codes to return the value of the sum of all matched numbers. So in this example I would want the number 65 in one cell...

Sum Based Upon Cell Color - Multiple Times
I have a workbook with a tab called "parts list" where there are thousands of parts with prices. I need to sum all of the parts based upon their location within the list. The list is divided with the following headers - Yellow (Assemblies), Gray (Sub-Assemblies) there can be many under a yellow header, and Green (Components) there can be many under a Gray header.

I have been summing the areas manually, and I am hoping for a more automated way of creating the totals by running a macro.

I need to sum (Column K) from Yellow+1 to Yellow-1 and deposit the sum in the starting Yellow row - Column L. This needs to be repeated for as many Yellow Headers as there are in the list. I then need to repeat the process for Gray Headers - Col K, Gray+1 to Gray-1, and put total in starting Gray header, Column L. Once again, there can be many Gray Headers under a Yellow header, and this needs t be repeated throughout the list. I then need to repeat this for the Green Headers - same as above Gray. I am hoping that this can be done by color, but if it's easier, I can sort the list by color and in column M, add an "A" to all Yellow Headers, "S" to all Gray Headers, "C" to all Green Headers, and "E" to represent the end of the component list -

Sum By Multiple Criteria & Use Cell Values As References
I want a total of column F based on criteria in column D and column K from the worksheet named in cell C9. I have put in the indirect function in the first part but am messing up the syntax in the second and third part of the formula. "Indirect(C9&" should be where 'Oct2009' is shouldn't it. Where am I going wrong with the following formula?

SUMIFS(INDIRECT(C9&"!\$F\$2:\$F\$11000"),'Oct2009'!\$D\$2:\$D\$11000,\$C\$1,'Oct2009'!\$K\$2:\$K\$11000,"YOKO")

Make Cell Equal To Another Cell
I am looking for a way for a cell to equal another cell but the cell that it looks at is controlled via another cell.

So, for example, cell A1 I type in “E5” and this tells cell B1 to display the contents in cell E5.

To Have Cell Equal To Autofilter
I have 2 worksheets, and I was wondering if I can have a cell from Sheet2 equal to the subtotal of the Autofilter criteria of a column in Sheet1.

I do have something working with macros but it takes a long time. This would make things a lot easier.

Cell Validation :: NOT EQUAL BLANK
Would like to know how to place validation on cell a2 to NOT EQUAL BLANK.

If Cell Has Number Then Equal, Else Show Nothing
If square A1 says deposit account and c1 has a figure in it, i want g1 to repeat the figure,but if a2,a3 etc says something other than deposit account i want g2,g3 to remain blank.What is the formula for square g1etc?

If Previous Filled Cell Is Equal To
How could i change this formula so

If the previous cell "filled with a number" in column D is equal to C17 Then C18 otherwise c17

This is the formula
This formula is in D38
=IF(DAY(A38)=DAY(\$C\$13),\$C\$17,)

This formula is in D65
I also need to apply the same to this formula
=IF(MOD(ROW(A38)-MATCH(\$C\$13,A:A),7)=1,\$C\$17,)

Label Caption To Equal Cell Value
I have 3 labels in my userform that I want to display the text in AN50,AN52 and AN54 in all the time. How can I write this code?

Shift Cells Up If Cell Equal 0
In the range A1:Y66, for every cell whose formula returns a 0, I want it to delete that cell and shift the cells up.

Here is the code I tried, but nothing happened:

Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column > 25 Then Exit Sub
If Target.Rows > 66 Then Exit Sub
If Target.Cells.Count > 1 Then Exit Sub
If Target.Value = 0 Then Target.Delete Shift:=xlUp
End Sub

Message Box Equal To Cell Value
i need a bit of code that will display the values of selected cells in a message Box D4 & D10 & D185 is this possible

If A Certain Cell Does Not Equal Zero Then Run Macro
if a certain cell does not equal zero i want a macro to run. But i'm having trouble getting the logic right. here's what i have so far

Private Sub Worksheet_SelectionChange(ByVal Target As Range)

Range("u82").Select
If Active.Selection 0 Then

ElseIf Active.Select = 0 Then

end sub

Delete Row When Cell Not Equal To Another
The code below is an attempt to delete all rows where the cell in column A is not equal to the value of B1. B1 is text if that somehow makes a difference.

Dim n As Long, lastrow As Long
lastrow = Range("A65536").End(xlUp).Row
For n = lastrow To 1 Step -1
If Cells(n, 1) <> Range("B1") Then Cells(n, 1).EntireRow.Delete
Next n

Do I need to specify that B1 will always be the cell to reference (ie \$B\$1). Edit: Just had an epiphany, I also need it to stop after Row 3. I have some headers and such that I don't want removed.

Count If Left(cell, 4) Not Equal To Free
Im looking to count fields in column G, where the first 4 letters of column G do not begin with the letters "free", I came up with the following formula which doesn't work at all!!

Im also looking to do the same but with a sumif to perform the sum on a different column of data, but with the criteria LEFT(G15:G164, 4) & "" & "free") - (not sure if this bit is right either) staying the same.

=COUNTIF(G15:G164, LEFT(G15:G164, 4) & "" & "free")

Setting A Cell Equal To The Selected Value In A Combobox
I know you can set cells equal to other cells, but can you set the cell equal to a combobox created in VBA.

Sum IF (2 Equal Values)
I've created the following function that chooses the maximum value from a set of cells then inserts theappropriate row number (within a table) into a new cell.

=IF(J27=0,"?",IF(J27=J19,1,IF(J27=J20,2,IF(J27=J21,3,IF(J27=J22,4,IF(J27=J23,5,IF(J27=J24,6,IF(J27=J 25,7,IF(J27=J26,8)))))))))

It's working fine until I have 2 cells with the highest value. The above statement is entering the first cell that meets the criteria in the new cell but ignores the fact there maybe 2 (or more) of the same value.

How can I get both (or all) to be entered in the same cell? Is there a better way, maybe highlighting all the rows in the table that equal the max figure?

Check Whether Transpose Ranges Are Equal In Single Cell
How a single-cell formula to check that 2 transpose arrays are equal.

For example, A1:A5 are {1,2,3,4,5}

AND

B3:B8 are {1,2,3,4,5}

Is there an array formula in C3 for example, that will check (i.e. say TRUE) if corresponding ranges are true i.e. check in this cell that A1=B3, A2=B4,...A5=B8.

For Exempel

A1=B
A2=1
A3="="&A1&A2

I have even tried with concernate and indirect in A3 but no difference there...

I want A3 to return =B1 but it only returns it in text but i want it in form of a formula. Is there a formula that returns text directly into a formula or an easy way to do this?

Find A Combination Of Numbers That Equal A Given Sum
If I have A1 = 1, A2 = 3, A3 = 5, A4 = 7, and A5 = 9 in column A, Would someone know how to get the combination of numbers in column A that equal 13, or 24 for example?

Using The IF Function: IF E17 Is Equal To 9.5 Or Higher Then Cell E23 Should Automatically Read \$10.50
I am trying to work out a formula. I know it's a simple one but i can not work it out. If i work 9.5 hours or more per day I get an extra \$10.50 for food allowance.

For example (see attachment) IF E17 is equal to 9.5 or higher then cell E23 should automatically read \$10.50

Cell V7 To Tell Me If The Number In U7 Is Greater Than Or Equal To The Individual #'s In Cells U7-U40
I am using cell V7 to input the formula but I want cell V7 to tell me if the number in U7 is greater than or equal to the individual #'s in cells U7-U40 and I would like it to put a 1,2,3 in the cells of V7-V40 for the three highest numbers in order of largest to smallest if is this possible?

Add Formula To Cell To Equal Product Of 2 Other Cells Via Macro Code
I'm trying to set a cell on one sheet to be equal to the product of two cells on another sheet. The problem is that one of the cells on the other page is dependent on the variable T. This is what I've got and it's giving me errors

Worksheets("Output").Range("K14").Formula = "Worksheets("Calcs").Range("D17")*worksheets("Calcs").Range("D17").Offset(10+T,0)"

When I record a macro it gives me this, but again, I need the last cell in terms of "T"

ActiveCell.FormulaR1C1 = "=Calcs!R[3]C[-7]*Calcs!R[14]C[-7]"

Find First Blank Cell In Column & Return Adjacent Date Less Than Or Equal To Today
how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.

I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.

CREATE TABLES LIKE BELOW?Column A Column B Column C

March 1, 2008Saturday
March 2, 2008Sunday
March 3, 2008Monday
March 4, 2008Tuesday
March 5, 2008Wednesday ...................

Restrictions On Drop Down List If Cell Is 'a' Then Other Cell Must Equal 'b'
I have two cells, both of which have drop down lists for options 'a' & 'b'. When one equals 'a' the other should be restricted into only saying 'b' and vice versa. I would also like the user to be reminded that he can only select 'a' once from the two menus. Ideally I would like to do this in a formula rather than VBA?

Copy The Dynamic Auto-Sum Cell And Paste It To Another Cell
2 Different worksheets to work with

The "Nursery" Worksheet
I already have code that puts the Auto-Sum amount below the last data row in the column named "Nursery Grand Total" in the Nursery Worksheet.

This Auto-Sum amount, however, will always be in a different row because the amount of rows generated from the report is always different as well, therefore, the Auto-Sum cell/row changes with that to be right below the last data row in the "Nursery Grand Total" Column.

I would like to copy (values only) the amount from this dynamically changing Auto-Sum cell and paste it into another worksheet named "Totals".

The "Totals" Worksheet
In my "Totals" worksheet, I have two columns.
"Master Total Description" and "Master Grand Totals".

In the "Master Total Description" column, I have a cell named "Nursery Grand Total" which is exactly the same name as the header row in the "Nursery" worksheet.

So,

In the "Nursery" worksheet/"Nursery Grand Total" column, I would like to copy the auto-sum amount

and paste it into....

the "Totals" worksheet/"Nursery Grand Total" row/"Master Grand Totals" column

Here are some pictures for reference...

If The Sum Of A Cell Is A Certain Text Then A Dollar Amount Populates Another Cell
Attached is an example. Office 2007 & 97 versions attached. If a drop down menu on one sheet selects a certain word, then on another sheet based on that selection a dollar amount is entered. I am guessing this would involve some if commands, I am really weak on making those.

Compare If Multiple Cells Are Equal
I need to compare the data in three fields and if the same ignore but if different then add them with a space and a hyphen.

I use this formula for 2 fields and it works great I just can't get it to work with three.

=IF(TRIM(Data!BC2)=TRIM(Data!AY2),TRIM(Data!BC2),TRIM(Data!BC2)&" - "&TRIM(Data!AY2))

I use the trim command as the users entering data often add unnecessary spaces etc. and it combines the data even when the same.

Multiple Variables To Equal Constant
I'm trying to create a spreadsheet that will tell the user how much of two products to use in order to get a desired percentage of total fat. For example: if the total pounds is to be 3000 at a fat percentage of 30%. There would be two products (a lean meat and high fat meat). The percentage of fat in those two meats will change each time. The user will enter those percentages and then the formula needs to tell how many lbs of each to use in order to get the desired percentage of fat.

Each time there is a "target" amount of each product to use. For example: 1000 lbs of Lean Meant and 2000 lbs of Fat meat. Those are based on the ideal levels of fat in each.

However, sometimes the fat is not at the ideal so the formula has to be adjusted in order to compensate.

Deleting Rows NOT EQUAL To Multiple Criterion
I have a spreadsheet with several thousand lines on it and I only want certain rows from it. Unfortunately I cannot use a sort as I have to keep groups of data in the same order (the line count in between the data that I need left behind isn't always the same so I can't go that route either). I was hoping there was some code to delete all rows other than those where the cell in column A contains either "NAME"; "Data1" or "Data 2".

I tried the code below but that didn't work.

Sum A Cell Dynamically Based On Another Cell
I have a spreadsheet which I use a number in cell E4 which can be an integer for instance let's say E4=9.

I want to go down a column and get the sum dynamically for let's say when the cell in E4=3.

The range in column G starts at G27. I then want to return the dynamic value to cell E3.

What is the best way to accomplish this using vba code?

Cell Sum :: Trying To Add The Numbers In A Cell
I am trying to add the numbers in a cell.

A1 12345 - the formula would be in A2 and would return 15 (the sum of 12345).

Sum In A Macro (sum One Column After The Last Cell With A Value In It)
I have a Macro and I would like sum one column after the last cell with a value in it. This cell has variable length with each file.

Is ther a way to include this function in my existing Macro?

Formula To Find The Sum Of Values That Were NOT Equal To My Quoted Values
Trying to find the sum of all cells in the array described in the formula that are equal to the values inside the quotations. I used this exact (as far as I can tell) formula to find the sum of values that were NOT equal to my quoted values and it worked just fine. Any ideas why formula 'A' will not work but formula 'B' does work? I have a feeling I'm missing something simple here!

Formula A - Does not work:

Formla B - Works:

Sumif(range,30,sum Range) Not Summing Values That Equal 0
I have a simple sumif formula that says =SUMIF(W61:W112,"<30",J61:J112). In column W, there are values ranging from 0 to 5000. If the formula is written like it is above, it excludes summing values from column J when the cell in column W equals 0. Why is this? I can just add another function that says sumif "=0", but I don't think I should have to.

Conditionally Format Cell If Last 3 Characters Of Another Cell = The Word "sum"
I have certain cells in column ‘D’ with a ‘nine digit code’ then a ‘space’ and the word ‘sum’ e.g. ‘123456789 sum’.

What I require is the formula to enter in ‘formula is’ when you select Conditional Formatting so the cells in column ‘E’ changes to a green background if the corresponding cell in column ‘D’ has text in it and the last three characters are the word ‘sum’

Values Which Are Equal Not Treated Equal
I'm having trouble with a small vba macro. At the end of the macro I test to see if two variables are equal and then print out true or false. However, for some reason even though the variables are equal vba is not treating them that way. I have put the values that represent the variables on a spreadsheet and used the if(x1=x2) formula and it says it is true, also, when I debug the macro and watch the values when it comes to test the logical expression the numbers are the same. I don't understand why vba does not say that the two variables are equal. I have attached a screenshot of the breakpoint where I double check the values are equal.

Sum All Entries Which Do Not Equal "n"
Instead of writing sumif(a1:a10,"y",b1:b10) is it possible to sum all entries which do not equal "n"?

Paste Multiple Cell Values From Multiple Workooks Into One Workbook
I’ve got a folder on drive C named “Customer Sheets”. In this folder at any time there could be over 500 individual customer sheets. i also have a "Summary Workbook" on drive C

What I need is a macro in my "Summary Workbook" that copies cells (“B3, B6, B12, B13, G5, G6”) form every customer sheet in my “Customers Sheets” folder and paste it into my “Summary Workbook” onto sheet2, every customer in a new row.

The “Summary Workbook” should run this macro every time it is opened or on my command so that the database is continually refreshed when a new customer sheet is made.

Match Value Of 1 Cell To Multiple Cells And Give Multiple Values
Sheet 2 is the problem.

I need to match cells e3:h3 whenver the dates change in in cells c5:c9 and then put there result of cells b5:b9 into the corresponding cells of e5:h9.

Basically what I'm saying is that I want to keep a track of all previous pay amounts from each pay period. So when the next period changes the date it also copies the new pay amount to the corresponding date of the previous pay section.

I have included a sample.

Search Multiple Values In A Cell With Multiple Criteria
I am trying to search for multiple values in a cell with Multiple criteria.

E.g: Please find attached the sample excel data.

I tried using VLOOKUP which is not working as I am having multiple values in column A.

Multiple Text Cells In One Cell On Multiple Lines
share a macro to copy cells from range C20:C300 and paste them in C2 on multiple lines. If possible two lines gap between each cell's value when they are pasted in C2.

Sum Next Available Cell
Building on my previous post, after deleting the last line and everything below, I would like to be able to sum the columns across, but since it changes everyday I'm not sure how to do this.

Sum Value In A Cell
in cell A1 numaric value is 123
In want to calculate in cell B2 as 6

(1+2+3=6)

12365 caluated as 1+2+3+6+5=17 then 1+7=8 only one digit

Sum 1 Or More Items In A Cell
I have a monthly calendar on each sheet for employees, attached is a copy of one of the sheets. I can have up to 2 combinations of text in a cell, i.e., 'V' or 'T' in this example, followed by a number, that can range from 1-12, i.e., V12T4. What I am trying to do is add up the total 'T' and 'V' time for the month for each employee. Hopefully between what I have written and my attached sheet, will explain what I am trying to do. I know how to write the =Sum(If for using only 1 item in a cell, but not 2.

Insert Sum In Cell
I have a worksheet that before I print.

I have a macro that inserts a sum at F27 (I also have sums at G27 & H27) prints the worksheet and then after printing clears the contents of F27.

If I was to add in a row and then run this macro of course the sum appears at F27 and my other two sums at now G28 & H28.

My question is there a way that when the "F27" sum is inserted it is somehow tied to the position of the G27 & H27 cells so that all 3 sums will be on the same row.