Find And Copy 10 Values - Paste To Various Cells On Second Sheet?
Jan 7, 2013
Build a roster from:
Sheets(Settings).Range("A21").Value (this value is variable)
Find that A21 value in Range T2:T100 (each value in the range is unique)
Copy that value to Sheets("Roster") E8
and the next 9 values to
Reason for posting: I've been trying to do this with vba but sheet formula will probably work, I can always Copy/Paste Special/Values to clear the formula. Keyword searching has resulted in no progress.
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB: Set sourceBook = Application.Workbooks.Open(sourceFilename) Set sourceSheet = sourceBook.Sheets("Current") Set targetSheet = NewBook.Sheets("Sheet2")
I am trying find a match from multple "text" values.
The values I'm using are flight numbers from sheet "Indiv case" in column (range H2:H51). The flight number could occur multiple time in the column.
The associated flight number sheet "Code & categories" in column (range H2:H257) are associated with the last port of embarkation (range I2:I257) in "Code & categories" sheet.
I need to copy & past the name of the Last port of embarkation from sheet "Code & categories" into sheet "Indiv case" adjcent to the flight numbers in column (I2:I51).
Example: Sheet "Indiv case" from Column (H2:H51) Fligh number Data: UA863, VA4148, EK432, BA15, BA15, VA98, QF8, AC33 etc Using these value from "Indiv case" from Column (H2:H51) search and match valuse in "Code & categories" in column (range H2:H257)
If match found copy valuse from sheet "Code & categories in column (i2:I257) in to sheet "Indiv case" into column (I2:I51) Last port of embarkation".
H2;H257, I2:I257 Flight, Last Post 3k111, Singapore 3k131, Singapore AC33, Vancouver
Copy and Past "Last Port" into sheet "Indiv case (I2:I51) adjcent to matching flight code.
Thank you all so much for this wonderful forum. Today has been a day of going through post after post. I am usually able to solve my problems through reading similar issues. However, just can quite get this one and I think it is rather simple, but frustrating none the less.
Attached is a spreadsheet with a list names in column B. The codes I have tried to write or have copied find one name and paste it to sheet 1. However, I need to find several names and then copy each row to sheet 1.
I need to firstly find data in the main sheet which relates to the activecell and then I want to copy and paste that data into another worksheet.
The simplest of ways I guess would be the .xldown function however this seems to copy the blank cells as well as the cells with data, which is no good. I have therefore written code as below which finds the first cell with data, copies and pastes, then loops.
How do I set the loop to look at the next cell down from the initial copied cell and if there is data in it to paste it into the cell underneath the one I have just pasted into?
Looking for days and I have tried all kinds of things but nothing works. The lates was the Kickbutt find function. Let me explain what I am tring to do. I have an estimate work book with 11 diffrent sheets of material. When I create an estimate I go thru the sheets and select the quanitity of each material needed. What I would like to do is search thru all the sheets and find all the quanititys in column A greater than 0, the copy the complete row A to F to a sheet named FoxOrd. Trying AronBloods "Kickbutt find function" seemed to be the code to use but I could not get x = " >0 " to work. So I got rid of all the default 0 in the qty column and just left it blank and changed the code to x = "*" which searched and found all the numbered rows but this included the header row when pasted to the order sheet
1. For a file moving from one cell to the next, down the column, get the values and seach for the values in file number two.
2. If that value is found, copy a cell from file 1 to a cell of a column on the same row where the value was found on.
3. Do what was done on number two, but with a different column.
this is what i have so far...
Sub replace() ' ' Macro2 created by david '
' for the entire sheet, moving from one cell to the next down the column, changing rows ' search for the contents in another sheet, and then if that is found, ' copy the row number to a variable, and then ' copy column K from sheet 1 to column N of sheet 2, using the same variable above ' after that same, but L goes to P. ' ' Windows("file1.xls").Activate Rng = Selection.Rows.Count Dim toFind As String ActiveCell.Offset(0, 0).Select Application. ScreenUpdating = False Dim i As Integer For i = 1 To Rng Windows("file1.xls").Activate toFind = Range("A + i") Windows("file2.xls").Activate
Essentially, I have 2 Sheets: "SheetWSS" = data to be copied "SheetWSD" = destination of copied data.
Below is a sample of the data in "SheetWSS" ----------A------------------------B-------------------------C 1------Trade ID -------Description---------System no. 2--------579----------------Loan ---------------------- 7 3--------580----------------Deposit---------------------22 4--------702----------------Deposit--------------------- 11 5--------703----------------Loan ----------------------- 58 6--------732 ---------------Loan------------------------66 7--------733----------------Deposit-------------------- 99 etc...(no more than 10000)
Now, an explanation of the data:
1) I work for a small bank (CORP) that takes deposits and gives loan.
2) CORP books these trades using only system no. 7 and 11; other system nos. belong to customers.
3) When a single trade is booked, the 2 sides of the transaction is recorded (by Trade IDs) . E.g rows 2 and 3 relates to one trade. So if CORP loans money with system no.7 to CUSTB, who uses system no.22, it shows for CORP a loan and for CUSTB, a deposit.
4) Everyday, the data in "SheetWSS" is updated with a different number of rows from previous, but the number of columns remain the same.
So, here's what i'ld like the macro to do: 1) Go into Column C, find system no.7 and 11. 2) For each 7 and 11 found, Copy the next row . So if for e.g, system no.11 was found in C4, i want the ENTIRE ROW 5 to be copied. 3) Paste the entire next row in "SheetWSD" until we have a list of all opposing sides of the same transactions initiated by CORP.
I have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Sub Copy_To_Another_Sheet_1() Dim FirstAddress As String Dim myArr As Variant Dim Rng As Range Dim Rcount As Long Dim i As Long
I've attached a workbook which contains two sheets: PAYM DEVICE_PAYM
Data is updated on DEVICE_PAYM each day with the figures I need located in column "AN". I need to be able to copy the data from "AN" and paste it into a column on the PAYM sheet. The destination column on the PAYM sheet needs to be specified by inputting a specific date - ideally, I would like to use the calendar Add-In as part of this process. I've already input some code for the calendar but am unable to develop this further so that it finds the correct date column and pastes the data across from the other sheet.
I have a userform that I use to add a new record to a csv sheet.
In my workbook I have a table with the same format that my userForm has. What I am looking to do is copy the values from my lookup table on my sample sheet and past them in my add userform in the correct corresponding cells. I have been trying to make the code work for some time now with no luck.
I am looking for a macro that will copy a worksheet to a new workbook and 'paste as values only' - this is because I already have a macro that I am trying to use to 'autofilter' the sheet to only show rows and colums that have entries in them. Since the sheet is dynamic, the macro will not work unless I copy and paste as values only...
Workbook attached - FYI, the 2 sheets in the workbook are actually in 2 separate books, I have just put them together to make it easier to post here...
I have a file that has simple stats for multiple days. At the end of each day is a "Summary" line. I can't figure out how to find the lines that have the word Summary in them and copy all the values in that line to another sheet. I've made a mock up of my data. I have minimal experience with Macros, but am learning quickly.
My Excel workbook is composed of 2 sheets. The first one is a Dashboard (Sheet1) and the second one (Sheet13) is where the data is.
I would like to press a button on the first one, enter the text to be found into an Inputbox and then copy-paste cells from the second sheet (containing the data) into the first one.
The data is structured in rows, from A to V columns.
I would like, according the row where is located the found cell, copy given given cells from Sheet13 to Sheet1.
Right now, I have a macro performing the search like desired and selecting the found cell :
Code: Private Sub CommandButton1_Click() Dim FindString As String Dim Rng As Range FindString = InputBox("Entrer le contrat de support - rechercher (DSI....) ") If Trim(FindString) "" Then With Sheet13.Range("V:V") Set Rng = .Find(What:="*" & FindString & "*", _
I would like to copy cells located in the columns A, B, D, E, F, K, S, (T:U) from the row where the searched string has been found in Sheet13. It has to be copied on Sheet1, on two rows : (N29:Q29) & (N30:Q30).
When a new research is done, the previously copied cells should be cleared out.
2. The second point is about duplicating a button with an associated macro. The macro is running like I want but I have to insert 299 more buttons, with the updated formula according to the row where it is located.
However, one part of the macro has to stay the same because all of these 300 buttons increment a single counter located on Sheet1.
Code: Sub Button2600_Click() If MsgBox("Etes-vous sûr de vouloir ajouter 1 année de support pour" & vbNewLine & Range("E7") & " " & "(" & Range("F7") & ")" & " ?", vbYesNo + vbQuestion, "Modification du Contrat de Support") = vbYes Then Sheet13.[A7] = DateAdd("yyyy", 1, [A7]) MsgBox "Contrat étendu d'une année." Dim x As Integer x = Sheet1.[R11].Value Sheet1.[R11].Value = x + 1 End If End Sub
You can get the excel workbook at the following link : [URL] ....
I'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
I have a spreadsheet that I would like to loop through column "C" and if criteria is met copy and paste A:C on sheet1 to sheet2 over multiple columns alternately. What I mean by alternately is that I would past the first row in column A6 then the second in E6 then the third in A7 and so on until all items are copied. I purposely left a blank column between both columns of information. I've tried sorting/and advance filtering and couldn't get it to work.
Example: loop through column "C" If I have the Letter "A" copy data to column "A" and "E" alternately back an forth until I no longer meet the criteria. I start putting data on the 6th row due to header information in rows 1-5. ... If column "C" is the letter "B" copy to column I,M,Q,U
Lastly I could always have less rows of information than I do columns. SO the last column could be empty. I always sort my data by column "C" so data will be sequential.
I have spent a few days searching through forums but cannot find examples that i have been able to successfully adapt ( because they are to complicated for my limited knowledge). I have a workbook with 5 sheets, sheet1 (current), and sheet 4 (archive) are the important ones. I need a macro to
A) copy rows from "current" to "archive" ( to the 1st empty row) if column S of "current" contains "Closed" ( the word is generated by formula).
B) The paste needs to paste special values and number formats ( want to lose formula but not conditional formatting).
C) data sort "archives" based on col A - this puts the newly archived data into correct sequence.Data sort lowest number 1st
D) delete the copied rows from "current".
e) give me a count of how many rows it deleted, (I have a macro to insert rows so will run that manually to recreate the correct number of emtpy rows (with formula and formatting) to bring the current sheet back to usual size.
I tried modifying a macro by RPaulson (based on cells on one sheet to cells on another), to work with entire rows but couldn't get it to work.
Found that paste special uses PasteSpecial xlPasteValues, but , and thats about it.
I'm trying to copy the non blank cells in an area ("B120:K239"). and special paste (values only) to the next blank row of the actual work area (3 pages) within the worksheet. The area that this needs to paste to is between("B10:K29, B44:K63, B78:K97"). Problem is that if there are more rows to be copied and pasted then there are open rows on the first sheet it gives an error due to the rows outside those areas having different formats (merged cells and that)
Question: Is there anyway to special paste between ranges? I've tried to hide the inbetween rows and that still doesn't work. Could it be possible to add something to this code to ignore hidden rows or to only paste to visible rows?
Sub Special_Paste () Application. ScreenUpdating = False With Range("B119") . AutoFilter Field:=2, Criteria1:="<>" With Range("B120:K239") Application.CutCopyMode = False .Copy With Range("30:43") .EntireRow.Hidden = True With Range("64:77") .EntireRow.Hidden = True Dim NextRow As Range Set NextRow = Range("B97").End(xlUp).Offset(1, 0)...............
I am very new to Macro programming. I want to set up a macro which will copy data from few cells in a sheet and paste them as "Values" to certain specific locations in another sheet based on criteria. This copy paste needs to be done for about 40 different cells. I want to fix this with a button on the source sheet, so that this process happens when the button is clicked. I am attaching a sample file showing what I need.
I tried to make something to find a certain value (from a userform) in a range, and then copy the line partially to another sheet. Then go forth to the next found item and do the same. But... I cannot seem to make this loop.
With Sheets("Data input").Range("N5:N1100") Dim FoundRange As Range Worksheets("Data input").Activate
I have a set of data on sheet1 indicating test scores and basic information. At the top of the data, I have some drop-down menus that allow me to select certain minimal score results. I used conditional formatting to highlight the rows of individuals that meet the selected criteria from the top of the screen. You will notice in the screenshot, that I placed a button at the top called "Go!". Ultimately, I'd like for when I push the "Go!" button, Excel will copy the highlighted cells and paste them into sheet2 (beginning on row 2 as I have a title bar in row 1).