I need a formula that will allow me to search a column (B1:B19989) that
contains text with the data from a column (A1:A32417) that contains a list of
part numbers and display a result(True/False) into another column (C). Column
B's text has the part numbers mixed in with the text. I need to know which
numbers from column A are found within the text of column B.
This is what I have tried in C1: =VLOOKUP(A1,CATALOG,2)
All I get is #N/A - I know that the value in A1 exists in CATALOG
I have a table with 500 entries which is some physical properties for some chemicals. What I am needing to do is get something to find out what chemical formula the user has typed in another cell on a separate sheet, then VBA finds the component on this table and picks out information from columns within that row. Some of that data will then be used to do a calculation. The user can select up to 20 components, so VBA needs to be able to do it for 1 or anything in between 20 components. The data which I need to use for further processing is within columns D to J.
I've got a bit of a problem revealing pivot table source data, so just wondering if anyone know how to reveal it? My colleague sent me the spreadsheet, I can see the pivot table, but I can't find the source data that the pivot table links to.
I'm using VLOOKUP with MATCH to find data in a table. I now have to add a third condition to the look up. I've attahced a file as an example. I'm not sure how to list the data for the third condtion. I created another table with the data for third condition.
I have a table of data which represents data in different categories by week.
My ultimate goal is to have another table representing the data for each month - for instance - for each of the categories the data for :
06/04/2009 13/04/2009 20/04/2009 27/04/2009
is summed to make the data for the month of April.
The way I'm doing this at the moment is very long-winded
I'm using a whole new table - the size of the original weekly one - for each month. A calculation decides whether to effectively leave a cell blank or insert the appropriate data based on a date being within a particular range.
So in each "month table" there is the same list of week values:
06/04/2009 13/04/2009 20/04/2009 27/04/2009 04/05/2009 11/05/2009 etc.
but for each "month table" only the cells adjacent to the dates within the relevant month will return actual numerical values within them
This is an example of the forumula I am using in these tables: =IF(AND(($AD7>=MIN($AE$5,$AE$6)),$AD7<=MAX($AE$5,$AE$6)),$C7,"NA()")
Then a master table sums the totals for each month.
I want to be able to keep this table but get rid of the ones for every month as the sheet is getting unwieldy!
I have tried several times to attach the sheet for clarity but each time upon trying to "Submit New Thread " I am getting page not found errors - the sheet is only 133KB and I have tried zipping and sending also - I can't make it any smaller.
I have created a table in Excel 2010 (pls see attached table named post.xlsx).
Then copied the above table into PowerPoint 2010, using "paste link" (I tried to attach the PowerPoint file but the system says "invalid file type" and I cannot attach it).
Question:
I have received income data for another month - the new month is 13 and the corresponding new income is 100. I typed 13 and 100 into the Excel table post.xlsx and thus extended the table by another column.
Then I went back to PowerPoint slide, then right clicked on the table there, then clicked "update link".
Specific Question:
The newly-typed column in Excel table is not get updated in PowerPoint table.
I have enable Refresh on Open for my excel pivot table, but user need to click "Enable Automatic Refresh" , only solution i came across is to change the registry setting. Which i dont have access to edit registry(admin disable the access).
Alternate solution i try to use Access macro to automate the process and use Outputto save it as a excel file A. Then use excel file B to update pivot table from excel file A.(as excel A data is always latest) The problem is i will get "....A file name already exist...do you want to overwrite.." prompt. Which defeat the automate process.
Any other solution to enable the automatic refresh on open the excel workbook?
Or Access can overwrite the exist file or save it as another file name with timestamp ?
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that is either specific to this worksheet or in a macro. When the sheet is opened I enter a date in B2. I then enter data into A7, B7, and C7. What I would like to happen is when the data is entered into A7, B7, and C7 the sheet goes and finds the same date that I entered in B2 and copies that data from A7, B7, and C7 into F7, G7, and H7.
I would like to have a macro to automatically generate a statistics table (on the "statistics" tab) with the 5 following fields: Fragment names / # samples / # of failed samples / % of success / # of variations in the fragment (SNP). At the bottom of this table, I would like to have a cell with the average % of success for all fragments. The data to generate these statistics are on the "gene name" tab (please note that this name will change every time I will work on a new gene). To make things easier, I think the macro should be run from this tab.
1. The Fragment names are displayed in row #5. I use one column per variation per fragment. If one fragment has 3 variations, there will be three columns and I will merge together the fragment name cells. The fact that some cells are merged can be a problem when copy-paste to the stats table (as I would like to get rid of the merging).
2. # of samples corresponds to the number of cells in blue in column A. The number of samples can change from one report to another but is always constant in the same report.
3. # of failed sequences. In the table, I type "Failed Sequence" (if the analysis has failed) and "Missing Sequence" (if the analysis has not been done). When a sample is failed or missing, it is for the who fragment, no matter how many variation there is in the fragment, so I usually merge the cells of all variations for this failed sample.
4. % of success: this is quite easy #sample/#of failed+missing sequence for this fragment
5. # of variation is equal to the number of variations for this fragment (can be 0, 1, 2, etc.). When there is no variation in a fragment, I put '-- in all cells of the corresponding fragment on the "gene name" tab. Fragment 3 on my file is an example of 0 variation.
Is there a function to convert the data shown in table 1 to table 2 without rearranging the columns and rows? because i don't want to use TRANSPOSE. I want a function, somthing like SUMIF with OFFSET or INDEX and MATCH or any other function.
I created a lookup table that works quite well. It even has if statements in the LookUp Formula. However, I have to update the table it pulls the information from each day. I wind up recreating the range each time because the table always has more rows each time. Is there a way I could just paste the table in each day and not have to change the range? The columns never change.
I have a large table that I want to reconstruct. For simplicity sake, let's just says it's 3 rows (excluding headers) by 3 columns.
Item Description 1/1/2014 1/2/2014 1/3/2014
Cheese Burgers 2 3 4
Hot Dogs 5 12 6
Beverages 2 5 3
I want to reconstruct it so that the column headers become values in the table. The table headers are dates, in this case, if that gives clearer picture. So the new table would have 9 rows, (3 rows of data, excluding the header times four columns).
Item Description Date Quantity
Cheese Burgers 1/1/2014 2
Hot Dogs 1/1/2014 5
[Code] ....
The above example is sorted by date but I would be indifferent if it's sorted by the Item Description.
Is there an easy way to do this? Pivot possibly? Again, my data table is large: 36 rows x 181 columns. Using the copy/paste/transpose feature is pretty impractical.
How do i change this code so i can find the next available row in a table. At the moment it finds the next available row after the table. The table starts row 4 and finishes row 311 however it could grow. There is data in other columns in the Table so i need to stick to searching only column B for the next blank cell.
I have data spread across 76Rx68C - this table is raw data with no logic to placement of values within .
In another sheet i have one row of values.
I need to know if each of these values appear in the data spread. - a simple YES / NO would suffice - i dont need to know where exactly are they appearing in the data table.
I'm having trouble coming up with the proper syntax to find the last (empty) row in a table. I already have the code figured out to add the row, but need to identify that cell as the paste target.
Originally, the 3 tables on this sheet were in different columns (each table is only a one column listing of part numbers). But then when I would attempt to delete something from one of the tables, it would delete the entire row, which of course affected the other tables as well.
So, I arranged the Tables so that they are all in Column A. Now a deletion shouldn't affect the other tables. But with that came another problem, the usual method (End(xlUp)) to find the last cell no longer works. I need to find the last cell in a specific table, not the last cell in the column.
Dim lrow As Long Dim the_sheet As Worksheet Dim table_list_object As ListObject Dim table_object_row As ListRow Dim last_row_with_data As Long Dim Log2 As String
I was wondering if there is any way possible to link your pivot table filters to filter the data the same way in the table that it comes from? So if i had date as one of my headers and i filtered the date to a specfifc date, is there a way to also filter the date in the data source sheet?
The # of days column will be a manual input. Then I have a larger table that will take those values and convert them to look like this: (Obviously the dollar values are pulled from somewhere else)
1 DTX $ 1,292.00
2 DTX $ 1,292.00
3 DTX $ 1,292.00
[code]....
I've been thinking of trying to use a macro but not sure that is the best way. Using a button or something doesn't seem very elegant either.
I did a data table yesterday and it worked. I tried again today and the results are incorrect. They are coming out as a constant (the same result as the original formula). Has anyone had this happen before and figured out how to fix? My spreadsheet is fairly complex. Does the data table formula need to refer to the "base" cells? For example, if the formula refers to cell F15, but in F15 the formula is +C15, does my data table formula need to use C15?
Look at the Picture Below I Want that the Cell that marked with Red Arrow Returns a "Rank" Value in the Table, Which is a "Blaster" Rank. And I want That Cell Also Automatically Changed When "Blaster" is Changed to "A.A.Z Gonz" or etc. What Functions that i have to choose, INDEX? XL.jpg
I have a pivot table that looks like this:Red Yellow OrangeApple .................12 Banana ......................10 Strawberry ..........8 Carrot ..................................2
I want to know the colour of each fruit, for example:
Apple Red Banana Yellow Strawberry Red Carrot Orange
What formula should I have in the second column to find the colour of the fruits?
I have one sheet (sheet 2) that contains three columns of data, a range of a low value and a high value and a corresponding value (column c)-- A B C 0 54 0 55 64 1 on the other sheet(sheet 1), i have a column(column x) in which i need to find that corresponding value (that column c on sheet 2). basically, i need to write a function that says if value x (on sheet 1, column y) is between the values in columns A and B (on sheet 2), input the corresponding C cloumn value (on sheet 2) into column x on sheet 1. i hope this makes sense. an additional snag is that i have about 60 rows on sheet 2, and i need to make it keep searching this table until it finds the range that contains my value x (on sheet 1).
I need a find the intersecting price values for any given height and width. From what I have read on the internet, I can use the "=INDEX( ),MATCH( ),MATCH( ))" formula. However, this doesn't seem to work because the height and width is separated into intervals.
In the attached file I have two tables Table A illustrates the dates with start, end and code, Table B where I want the formulas that they would find how many days a code is in the month.
From F4:I37 I manually entered the day, I would calculate automatically.