Insert Text In First Empty Cell In 2 Dimensional Range
Nov 20, 2013
I'm looking for a quick and easy way to insert a value in the first empty cell in a multi-column, multi-row range using VBA. I suppose I could loop through the range, but the table could grow to immense proportions and I don't want to slow everything down.
For example, the new value should be placed in cell C4. It doesn't matter whether the range is looped through the rows or columns, either will work just fine.
A
B
C
1
5
65
56
2
32
12
89
[code]...
View 1 Replies
ADVERTISEMENT
Jul 24, 2009
I wrote some code that toggles bewtweeen the word "Yes" and the function clearcontents.
What it does not do, is if you click on cell A1 and change it's contents and you click on the same cell again it does nothing. You need to click on another cell say A2 before you can go and change A1 again.
My code is as follows:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("Documents")) Is Nothing Then
On Error Resume Next
Application.EnableEvents = False
If IsEmpty(Target) Then
Target.Value = "Yes"
Else
Target.ClearContents
End If
Application.EnableEvents = True
On Error Goto 0
End If
End Sub
View 3 Replies
View Related
Jan 8, 2008
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
View 9 Replies
View Related
Nov 27, 2008
I've been a lurker on this forum for a long while and it's always been able to provide me with lots of excel tips, and for that I am grateful! But this time I have a question that I can't find the answer to here, or anywhere else on the web after a few hours of looking. As a note, I'm not very experienced with Excel, probably somewhere between novice and intermediate.
What I need to create is a 2-dimensional array of data. The vertical (y-axis) are the tools, and the horizontal (x-axis) are the jobs. Where the y-axis and the x-axis intersect, will be the quantity of tools needed for that specific job. There are almost 1500 tools, and 100 jobs.
View 4 Replies
View Related
Jun 4, 2014
I'm trying to create a macro that when run, scans Row 12 (only after column E), Finds the first empty cell, then inserts the cell value from Sheet4 CellE8. Then the hard bit begins. I need it to insert cell info in all the cells below it, from different locations...
For example
A
B
C
D
[Code].....
In the above sheet, I need it to go to cell D2 and insert the values from Sheet4 CellE8, Then proceed to D3 and insert data from Sheet3 D4, then to cell D5 and insert data from Sheet1 A7, etc etc
I dont mind doing each cell individually, but they will always be in the same column (and row 2 "Value" will always be the one that determines the next empty column).
View 1 Replies
View Related
Jun 13, 2006
I've tried the below formula to get a bi-dimensional dynamic range that is defined by the last no blank column and last no blank row, too.
=A1:INDEX(A1:D18,MAX(NOT(ISBLANK($A$1:$D$18))*ROW($A$1:$D$18)),MAX(NOT(ISBLANK($A$1:$D$18))*COLUMN($A$1:$D$18)))
Does any one have a different approach to get this without using the offset function?
View 7 Replies
View Related
Apr 4, 2008
trying to add cells together that contain time (hours and minutes). The cell containing the total formula shows the #VALUE! result when and only when one or more cells being added do not have a value in them.
The times have been entered as actual times of the day, formatted for AM/PM.
A simple adding formula works fine, but all cells must have a value in them to obtain a valid result.
I attach a sample of the sheet.
View 3 Replies
View Related
Sep 18, 2012
I'm a huge fan of the DistinctValues function published by C Pearson here: Distinct Values Function
Now I have the problem that I need to get all the distinct values from a 2-dimensional range.
View 1 Replies
View Related
May 22, 2007
Attached is a really simplified version of what I'm trying to accomplish. I'll attempt to get my brain working well enough to explain it:
For each row, I have a person's name, their department, their site, and then a series of dates (representing dates of attendence). The four columns after the dates ("Counts" is the first) are me trying to keep all the right numbers in mind, and are the routes I've been trying to take on this. I have also tried to make a custom formula called ClassInRange, which isn't playing nicely.
What I eventually need to populate is the little 2x3 section at the bottom where the three sites and the two departments I'm working with (down from 5 sites and 8 departments for the sake of sanity). What I need to be able to do is populate those cells with something that will tell me how many people from which site and department have attended something within the date range.
So, for example, I need to know that the 2 guys in Wellesley attended something between January 1st and December 31st of 2007. (American date style, in case anyone's lost)
If you're able to help, please keep in mind that I'm not the end-user; I'm just the slightly crazy dude trying to create this thing and make it simple to use. Eventually, the Dept/Site box will be part of a template which is copied and pasted up to four times on a report sheet, each fed by different date-range criteria.
Also, the important information is the person's name, dept and site, which I hope gives some reason behind the organization; we want to find the person easily.
View 9 Replies
View Related
Sep 10, 2012
I had this code and it works like a charm, except, it crashed if the data gathered is just one element due to transpose ..
VB:
Function getAR(c1 As Range, c2 As Range, w As String) As Variant
Dim s As String
Dim arrTemp() As Variant
Dim arr() As Variant
[Code]......
View 5 Replies
View Related
Jul 20, 2007
I searched and found a few posts about transposing arrays into a range of cells, but none of them seemed to solve my problem. So, my problem is, I have a .Net assembly which provides various functions to allow Excel to access our Oracle DB stored procedures/tables, etc. This assembly is exposed via COM Interop. I call the GetSPINTypes() method, which returns me a list of type pairs (ID, Name), in a CSV string format.
I split the CSV into rows, and then put each row into a 2-dimensional array.
I then need to dump that array into one of my sheets in Excel, so I try to do the usual Range.Value = Array, but this sometimes tells me there is a type mismatch, and most times just doesn't fill the range. I've checked my arrays in the watch window, and they have definitely been filled in correctly, the values just don't appear when they are put into the sheet. See the code I'm using below:......
View 4 Replies
View Related
May 23, 2007
Some of you may have seen my 2-dimensional Date Range Criteria thread . By request, that thread has been closed and I am opening a new one on a related, but infinitely more complex note.
The solution to the previous thread worked, but not well with my project. I'll go a little more in depth into how my project works, and try not to be too detailed and irritating.
I am trying to create a homebrew Learning Management System for some of the Training courses that my department offers. I've posted here a few times on the same project, and the advice from all previous posts has been excellent.
What I have so far allows users to input all of the relevant information about a participant, and then keep track of the dates when they took a particular course. They input this information with a Userform. This data goes into a Participant Master List, which is where the majority of the functions take place. There is a Workings sheet set to xlVeryHidden, which houses some other information, including results for searches, and finally there is the Report Template--the source of my original question.
The original question was how to make a formula that would track how many people from each department and site have attended training within a date range. That question was answered in the 2-dimensional Date Range Criteria of the report.
What makes it potentially more complicated is that a user might want to generate two or three reports at the same time to compare side-by-side. I'm pretty sure I can make something that will do this, and allow it, but the way it's looking could be really complicated--extreme headache, and a lot of VBA coding.
View 9 Replies
View Related
Aug 8, 2014
I have a sheet that has a section in range (c18:k25) (it is merged and text is wrapped) If that amount of space is not adequate to fit all their information I would like to add a macro that when activated it asks how many rows would you like to add and then based on that number whether it be 1-10 it would insert a new row to that merged range so they can continue adding more information . I have the sheet locked down to prevent changes so it would have to be unlocked and then re-locked within the macro.
View 1 Replies
View Related
Mar 12, 2007
B15 has a formula which checks if one date is greater than another on the sheet. If that is true it displays a date, otherwise it displays empty text. A macro copies/pastes the date, if there is no date it copies/pastes the date in B14. This is what I have at present but of course it always sees B15 as NOT empty...
View 3 Replies
View Related
Jul 1, 2008
How can I set a formula to populate a cell if another cell is non-blank? I want a cell to display a number if another cell is not blank.
I'm guessing its an IF formula but I can't get it right.
View 5 Replies
View Related
Apr 17, 2008
Is it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?
View 3 Replies
View Related
Apr 2, 2012
Below is a same of the data I receive:
25106009 7735469 word text text
25106521 7735470 word text text
Sales Best 15hrs
25106577 7735471 word text text
Florida Drive Certificate
I need to be able to identify if a cell is text (vs. numbers) and then select all the data in that row and paste it in the first empty cell in the row above. So my data above should end up looking like this:
25106009 7735469 word text text
25106521 7735470 word text text Sales Best 15hrs
25106577 7735471 word text text Florida Drive Certificate
View 9 Replies
View Related
Oct 29, 2008
I am trying to create a macro that will allow a user to click a button, enter a text string that will be an email address into a field and have it added to the first empty row in column A or column C on sheet 1. I have not been able to record this with the macro recorder. The input box will be in cell E9 on sheet1.
View 7 Replies
View Related
Dec 15, 2011
I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
Code:
Sub TestBlankCell()
Range("D5").Select
Do
[Code].....
View 6 Replies
View Related
Dec 6, 2013
i need a code that will find the first empty cell in column "H" then select go down a row and select upto column "R" so in example range ("H2:R3") would get selected.
I am lost this is all i have so far and it doesn't work
Code:
Worksheets(newname).Range("H" & Rows.Count.End(xlUp).Offset(1) & ":" & "R" & Rows.Count.End(xlUp).Offset(2)).Select
View 1 Replies
View Related
Feb 12, 2014
In cell D1 of sheet 2, I want the cell reference to be displayed of the next available cell in column A of sheet1
for example if cells A1:A238 in sheet1 are populated the cell D1 of sheet2 will display A239
View 5 Replies
View Related
Mar 1, 2014
How do I select the next empty cell in a range?
Say I have myrange=Range("B32:B37"), then I want to put values into the next empty cell in that range.
I want to check if I have a value in B32, and if I have, I want excel to go to B33 and print a string there and the same for 34.
View 3 Replies
View Related
Apr 4, 2007
I was wondering whether someone knows a formula that would be equivalent to WEEKNUM (excel 2003) since I will not be able to install the Analysis Toolpack because of IT validation issues?
View 4 Replies
View Related
Jan 16, 2013
I am writing the following code to set the source data for a column chart. the source should be F13 until last cell, which is F862
VB:
ActiveChart.SetSourceData Source:=Sheets("Input TE country").Range("F13:" & ActiveSheet.Range("F13").End(xlDown).Address), PlotBy:=xlColumns
Now it selects F13 until the last cell, which is F65536.
View 5 Replies
View Related
Sep 22, 2013
I have a spreadsheet. In this sheet the data is added daily so one column is increased everyday. The rows may also be increased. What I am trying to do is to sum the data in each row for a range of first cell in the row to the last non empty cell in that row and this has to be done for all the rows. So I thought the for loop would be useful for such requirement and I tried to write the following code. But unable to write the sum formula in the last empty cell in a row and I get the value error. The code is as follows.....
Sub sum_on_LastEmptyCell()
'find the last empty row in column A
lrow = ThisWorkbook.Sheets("sheet1").Cells(Rows.Count, 1).End(xlUp).Row + 1
'find the last empty column in a row
[Code] ........
Though one of my friend told that it can be done with "with and end with block but I am not aware of with and end with block.
It would be better if you tell me that how can I put the sum formula in my code. How can I use variables which return the row number and the column number in the sum range within the For loop because I want to put If Else condition for the calculations within the For loop i.e. if certain condition is true then I want this calculation to take place otherwise do something else. Moreover it will be easier for me to understand. Because I can use different formula based on different cells as well. Is there any way to do this?
View 3 Replies
View Related
Feb 22, 2007
I am not sure of the VBA code to delete enitre row if a cell is empty only within a range, then Ascend according to that Row's Values and show the
Rank No's only on what Rows that remain.
The end result example is in Sheet2
View 9 Replies
View Related
Feb 26, 2009
I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
View 2 Replies
View Related
Feb 12, 2009
I've encountered another thing during my data analysis that I would like excel to do for me (less work, more fun ) I basically have a **** load of columns and rows, where different ppl are represented on different rows. Every person has an ID nr. between 1 and 279. My column A holds those ID numbers. I want excel to make a new empty row between every person. So if column A looks like
1
1
1
2
2
3
I want it to be
1
1
1
2
2
3
View 2 Replies
View Related
Jun 5, 2014
I am trying to concatenate entries into one cell so that when uploaded, the comma-separated contents will be treated as tags. copperberry sample file.xlsxSee attached sample file. Wherever there is a 1 in a row, I want to take the column header text above that 1 and concatenate it with subsequent text in the cell at the end of the row. See sample end result in cell J2. I assume I need an IF statement, but I'm not sure how to phrase it to collect all the concatenations needed. There are 200+ rows.
copperberry
Windows 8.1
Excel 2013
View 2 Replies
View Related
Jan 28, 2007
I am looking for a formula function or a vba code where:
- In workbook1 find the first cell that is empty between range A7 -
A10,
- In workbook2, in Range G10- G13: find the word "Day1".
- If the word "Day1" exists in cells G10 or G11 or G12 or G13, copy
the particular cell or cells where "Day1" exists to the first found
empty cell or cells in range A7-A10 in workbook1.
Lets suppose cells A8, A9, A10(workbook1) are empty cells, that means
A8 is the first empty cell.
And G10,G11,G12, G13 (workbook2) have the word "Day1"
Then,
Copy cell G10 into cell A8
Copy cell G11 into cell A9
Copy cell G12 into cell A10
View 3 Replies
View Related
