Copy, Find Next Empty Cell, Paste
Mar 20, 2005
I am using MS Excel 2000. Sheet1 is my working sheet. Cell A17 displays the current date (dd/mm/yyyy). Cells B17:K17 display my summary figures for that day. What I would like is a macro button that would look at the date in Cell A17, and if it is the first of the month …. eg 01/03/2005 it should insert a new sheet into the workbook and put the name Mar05in this case or what ever month it is on the tab. It then copies Cell A17:K17 and pastes the data in to the corresponding monthly sheet starting in A3 to K3. Because my working sheet (Sheet1) is updated with different data daily the new summary data (always in A17:K17) needs to be copied and pasted under the previous days entry in the corresponding monthly sheet. For the month of March I should end up with 31 entries giving me a summary for that month.
View 7 Replies
ADVERTISEMENT
May 19, 2009
I want to insert some data in a number of cells (e.g. A1, B4, C4 and H8) on a worksheet ('Sheet 1').
I then want to press a button and have some code that:
Looks at column B on 'Sheet 2'
Finds the next empty row Copies and pastes the information from Sheet 1 into specific cells in that empty row.
View 2 Replies
View Related
Feb 3, 2009
I want to copy a value in "A1" and i would like to paste it in Column "J" but the problem is that there are some values in column 'J' so i want a code that finds the first empty cell in column "J" and paste in there the value from "A1"
View 8 Replies
View Related
Jun 15, 2007
I need to find the first non-empty cell in a range and paste a constant value into the preceding cells.
aa bb
aa bb
aa bb
aa bb cc
aa bb cc
aa bb xx
aa bb xx
aa bb xx
aa bb cc
aa bb cc
View 5 Replies
View Related
Aug 23, 2008
The following code is intended to copy and paste the value from cell I2 to the first unused cell in column K. There is is header in cell K1. It works fine if there is a value in K2 or K3, etc., however, if K2 is blank (all cells beyond K1 are blank) I get an error 400 when I run the sub.
View 14 Replies
View Related
Oct 3, 2008
I'm have never learnt VB before and would like to try to write one to perform the following: If the next cell isempty, go to the last cell, copy it and paste into the empty cell; Else if the cell is not empty, go to next line and repeat the procedures until reach row =10000
.(BEFORE)
Row 1:Product A
Row 2:
Row 3:
Row 4:
Row 5:Product B
Row 7:
Row 8:
Row 9:......
View 3 Replies
View Related
Nov 27, 2007
i need a method to find the end value in a row (right side) and select the empty cell to its right to paste data in.
problem is the row where this data is may change so using
limit = (row, col).end(XlRight).Col
View 9 Replies
View Related
Jul 24, 2014
I have 2 worksheets, one called "Consolidated" and one called "Converted".
I would like to have a spreadsheet where I press the update button and a macro runs that searches for the word "Converted" in column E on the Consolidated spreadsheet (the original). When it finds it, I would like the entire row to be cut and pasted onto the "Converted" worksheet.
I have managed to do this with my current code:
[Code] .....
However when this macro runs, the row left behind on the original sheet is a blank row and I don't want this. I would like it to be continuous spreadsheet, not dotted with random blank rows!
View 6 Replies
View Related
Aug 23, 2007
I need my macro to copy and paste from one worksheet to another, which is fine. However I need the copied value to be pasted into the last empty cell in a specific column. It is currently pasting each copied value into the last empty cell in column 'A' regardless of which column I specify it to copy to in my code.
View 5 Replies
View Related
Aug 15, 2014
I want a macro which will copy all the data from sheet 1 in columns A:C ignoring any blanks
then paste it into the first free cell in column B of sheet 2
View 1 Replies
View Related
Mar 8, 2007
i need to have 6 or so cells copied and pasted into another sheet. (when a button is pressed) However before the data is pasted it checks if there is anything in the cell(s) that are being pasted into, if there is something then move down a line and paste. Here is the code i have already:
Sub Order2Invoice()
Sheets("OrderDatabase").Select
Range("B65536").End(xlUp).Offset(1, 0).Select
With ActiveCell
.Value = Orderform!G5.Value
.Offset(0, 1) = Orderform!E10.Value
.Offset(0, 2) = Orderform!E11.Value
.Offset(0, 3) = Orderform!E12.Value
.Offset(0, 4) = Orderform!E13.Value
.Offset(0, 5) = Orderform!E15.Value
.Offset(0, 8) = Orderform!E15.Value
End With
Sheets("Invoice").Select
End Sub
View 4 Replies
View Related
Jul 30, 2013
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies
View Related
Dec 15, 2008
I am trying to do is create an invoice log of payments received. For each payment there is a cell value of how many products the customer has which is updated on each payment entry. What I want to do is have a macro that runs when all other data is entered to update this value.
So I have a main customer sheet where it holds the product amount in the same workbook, let's call this cell $A$1 holding a value of 47. I go to enter a payment record on the invoice sheet, once this is complete the macro will run and look to $A$1 on the first sheet and update $B1 on my invoice sheet. On the next entry it will update $B2, then $B3 and so on.
View 2 Replies
View Related
Jan 28, 2007
I am looking for a formula function or a vba code where:
- In workbook1 find the first cell that is empty between range A7 -
A10,
- In workbook2, in Range G10- G13: find the word "Day1".
- If the word "Day1" exists in cells G10 or G11 or G12 or G13, copy
the particular cell or cells where "Day1" exists to the first found
empty cell or cells in range A7-A10 in workbook1.
Lets suppose cells A8, A9, A10(workbook1) are empty cells, that means
A8 is the first empty cell.
And G10,G11,G12, G13 (workbook2) have the word "Day1"
Then,
Copy cell G10 into cell A8
Copy cell G11 into cell A9
Copy cell G12 into cell A10
View 3 Replies
View Related
Apr 27, 2009
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MAIN DATA (columns A-D)
Investor1 (columns E-H)… Investor2 (columns I-L)… Investor9 (columns AK-AN)
Lawyer1… Lawyer9
Compliance1… Compliance9
Finance1… Finance9
Support1… Support9
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Sub transposedata()
Sheets("ConsolidatedYTDReport").Select
Range("E2:H4202").Select
Selection.Copy
XXXXXXXXXXXX
ActiveSheet.Paste
End Sub
View 10 Replies
View Related
Aug 29, 2008
I'm trying to find a macro that will copy data from the areas of B120:E179 and I120:K179 for example (linked to another worksheet within the workbook) and special paste (Values Only and skipping blank cells) it to the next available open cell up top where basic data entry will be taking place B10:E29 and I10:K29. I need it to only copy/paste the rows with data (skipping all cells/rows with no data) and once it is finished coping I will need it to place an "X" in column M next to the row that it copied data from. I would also need it to reference the data in each row from B to E and if there is an entry say on B14 to E14 that matches it but if I10 to E29 are blank then paste that information on row 14. If it does not match or if those columns are full then paste on next available line.
I hope I'm making sense here. This is for a vehicle tracking log between checkpoints. Each driver and info will be listed on each row. Columns B through E will contain information for each driver: name, badge, #passengers, and vehicle #. The log lists location, time, and destination for outgoing travelers in columns F to H. Incoming info is listed on Columns I to K............
View 4 Replies
View Related
Dec 15, 2011
I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
Code:
Sub TestBlankCell()
Range("D5").Select
Do
[Code].....
View 6 Replies
View Related
Jul 26, 2013
I want to find data from a certain point and paste this to a cell. My objective is to get all the data on too one row. This row is always 1 in col M called Run#. The find locations never change, just the data being copied always changes . Heres example,
In col K find FHBASC and look across to the right 3 cells in col N and copy.
Look in col M and find 1, paste above copied data into col GI.
Then move down rows to next FHBASC and repeat process until end of sheet.
If I can get a very basic simple macro to do this, then hopefully I can just re write to suit my other data.
View 9 Replies
View Related
Feb 1, 2009
I have a data sheet with employee information. Only one column. It prefixes information with codes, but keeps it in the same cell. I want to move data of certain types into their own columns, but the amount of data is variable, so I cannot simply move every Nth cell, etc.
i.e.
Employee#1
200 Firstname Lastname
204 99999999 (Employee ID)
G38 00005000 (i.e. Pension Deduction)
H38 00007580 (i.e. Benefits Deduction)
X96 00012099 (i.e. Staff Club Deduction)
Employee#2
200 Firstname Lastname
204 99999998
G38 00000775
X96 00001000
So you see some employees may have different codes altogether. But I know that I want all the cells that start with 200 to be offset (-1,1), and all the cells that start with 204 to be offset (-1,2), and so on so that basically I end up with columns of info instead of a one column list.
I have been reading and studying other peoples' macros, and am just starting to grasp the basic. When I wrote my own to accomplish this, I put this together, which doesn't work. But I don't know enough to know what I don't know.
View 7 Replies
View Related
Jan 8, 2014
first need to look for "PR" in column G, if found need to cut the entire row and insert at the top of the same worksheet.
View 1 Replies
View Related
Nov 15, 2006
I have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Sub Copy_To_Another_Sheet_1()
Dim FirstAddress As String
Dim myArr As Variant
Dim Rng As Range
Dim Rcount As Long
Dim i As Long
View 9 Replies
View Related
Apr 5, 2008
I have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
View 3 Replies
View Related
Nov 5, 2013
Let's say sheet - "delivery" - has a row1 that includes all possible delivery days. So A1 is 1.9.2013, B1 is 15.9.2013, C1 is 1.10.2013 and so on.
I want to make a macro, that will gradually go through whole row 3 in sheet "delivery" and look for "A1" date in sheet "Orders". Sheet "orders" have for example in column B the date of delivery, and in column C product of the delivery.
I want the macro to find all deliveries with "A1" date, and paste all products that will be delivered on this day under cell A1 (sheet delivery). then move on to the cell B1 (sheet delivery) - find all orders in sheet orders, that will be delivered on B1 date, and list all products with this delivery date under cell B1 (sheet delivery).
Example:
Sheet order
A
B
C
Date of delivery
Product
1.9.2013
orange
[Code] ........
Unfortunately simple Pivot table is not able to do this simple list.
View 3 Replies
View Related
May 8, 2014
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
View 5 Replies
View Related
Feb 15, 2010
i have to copy a Range A2:AA2
and i want to paste it into the first empty row (A3, .....)
can anyone write me the code for that?
View 8 Replies
View Related
Dec 11, 2013
I have the following code, so far:
Code:
Sub CopyPasteValue()
Dim ARow
Dim AColumn
Dim BRow
Dim BColumn
Dim Value
AColumn = 1
[Code]....
What I want it to do is to start in cell B1 and look down until it finds a non-blank cell; copy the contents of that cell. I then need it to go to the same row Col A and go down from until it finds the first non-blank cell then paste into the corresponding cell in Col B. It should continue this way through the rest of the worksheet. There is no set pattern to say to go down 5 rows or such. Also the number of pastes in each step is variable from 1 to ??
In my worksheet, the first non-blank cell in Col B is cell B3 and the first non-blank cell in Col A is A7. The paste should occur in cells B7:B10 because the next non-blank cell in Col A is A11.
View 2 Replies
View Related
Jun 1, 2012
I am trying to work out some code that will allow me to search worksheet2 to find the last filled cell in column A.
I would then like to copy the contents of the cell.
Then past this data into the first empty cell in a column in worksheet2
View 1 Replies
View Related
Feb 14, 2010
Have a small VBA code that simply copy a row and then paste it on first empty row in another sheet. Its working if i use a regular macro, but i have some problems to get it to work with some code. I want it as VBA since the copying is alot smoother. The problem i have in the code is the PasteSpecial.value, Since i dont want the formula to get pasted. Attachiing the worksheet. Its the macro PasteSpecial that i need alittle guiding on if possible.
View 4 Replies
View Related
Apr 4, 2012
I have a column of data in a range with some empty cells, I am trying to copy this data and then paste it into another column immediately after the existing data but without the empty cells, I am currently using the record button on the macro and copying to another column and then sort up a-z then copy again and paste. Long winded and sometimes still gives me a empty cell.
A
B
C
D
COPIED TO ANOTHER COLUMN
EXISTING DATA
EXISTING DATA
A
B
C
DRange("E3:E51").Select
Selection.Copy
Range("O3:O51").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
[Code] .......
View 9 Replies
View Related
Jul 21, 2014
My spreadsheet is sorted in numerical order in column A. Column B through AA only sporadically has data, although the data is present in full throughout each row. How can I add to my macro to copy the first full row of data (B#-AA#) and paste until it reaches the next row of full data and then repeat the same process. The biggest issue is once it reaches the last row, I would like it to paste the data in 29 additional rows.
1
22
13
2
1
56
54
65
[code]......
View 1 Replies
View Related