i need to have 6 or so cells copied and pasted into another sheet. (when a button is pressed) However before the data is pasted it checks if there is anything in the cell(s) that are being pasted into, if there is something then move down a line and paste. Here is the code i have already:
Sub Order2Invoice() Sheets("OrderDatabase").Select Range("B65536").End(xlUp).Offset(1, 0).Select With ActiveCell .Value = Orderform!G5.Value .Offset(0, 1) = Orderform!E10.Value .Offset(0, 2) = Orderform!E11.Value .Offset(0, 3) = Orderform!E12.Value .Offset(0, 4) = Orderform!E13.Value .Offset(0, 5) = Orderform!E15.Value .Offset(0, 8) = Orderform!E15.Value End With Sheets("Invoice").Select End Sub
I am looking to create a macro to be assigned to a button that copies the last row of data entered and then pastes it to the last empty row on a different worksheet. This is a dummy spreadsheet to work with (I have more data, but the concept is one in the same). Sheet1 ("Branch1"), Sheet2 ("Branch2"), and Sheet3 ("All"), the names in brackets are names of the sheets, but for ease I'll refer to them as Sheet1, Sheet2, and Sheet3. I have columns beginning in B as follows: Date, Branch, Currency, Coin, and Total (the branch and Total are tied to formulas, however I just need to the text values and formats to come over to the other worksheet). have the portion regarding the copy of the last row in Sheet1, however it won't PasteSpecial.Selection in Sheet3 as it says the cells are not sized or formatted correctly.
VB: Sub CopyB2() lr2 = Sheets("Branch2").Range("B" & Rows.Count).End(xlUp).Row lr3 = Sheets("All").Range("B" & Rows.Count).End(xlUp).Row + 1 Sheets("Branch2").Range("B" & lr2).EntireRow.Copy Sheets("All").Range("B" & lr3) End Sub
I have a column of data in a range with some empty cells, I am trying to copy this data and then paste it into another column immediately after the existing data but without the empty cells, I am currently using the record button on the macro and copying to another column and then sort up a-z then copy again and paste. Long winded and sometimes still gives me a empty cell.
A B C D
COPIED TO ANOTHER COLUMN EXISTING DATA EXISTING DATA A B C DRange("E3:E51").Select Selection.Copy Range("O3:O51").Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
My spreadsheet is sorted in numerical order in column A. Column B through AA only sporadically has data, although the data is present in full throughout each row. How can I add to my macro to copy the first full row of data (B#-AA#) and paste until it reaches the next row of full data and then repeat the same process. The biggest issue is once it reaches the last row, I would like it to paste the data in 29 additional rows.
The following code is intended to copy and paste the value from cell I2 to the first unused cell in column K. There is is header in cell K1. It works fine if there is a value in K2 or K3, etc., however, if K2 is blank (all cells beyond K1 are blank) I get an error 400 when I run the sub.
I'm have never learnt VB before and would like to try to write one to perform the following: If the next cell isempty, go to the last cell, copy it and paste into the empty cell; Else if the cell is not empty, go to next line and repeat the procedures until reach row =10000
.(BEFORE) Row 1:Product A Row 2: Row 3: Row 4: Row 5:Product B Row 7: Row 8: Row 9:......
I have 2 worksheets, one called "Consolidated" and one called "Converted".
I would like to have a spreadsheet where I press the update button and a macro runs that searches for the word "Converted" in column E on the Consolidated spreadsheet (the original). When it finds it, I would like the entire row to be cut and pasted onto the "Converted" worksheet.
I have managed to do this with my current code:
[Code] .....
However when this macro runs, the row left behind on the original sheet is a blank row and I don't want this. I would like it to be continuous spreadsheet, not dotted with random blank rows!
I am using MS Excel 2000. Sheet1 is my working sheet. Cell A17 displays the current date (dd/mm/yyyy). Cells B17:K17 display my summary figures for that day. What I would like is a macro button that would look at the date in Cell A17, and if it is the first of the month …. eg 01/03/2005 it should insert a new sheet into the workbook and put the name Mar05in this case or what ever month it is on the tab. It then copies Cell A17:K17 and pastes the data in to the corresponding monthly sheet starting in A3 to K3. Because my working sheet (Sheet1) is updated with different data daily the new summary data (always in A17:K17) needs to be copied and pasted under the previous days entry in the corresponding monthly sheet. For the month of March I should end up with 31 entries giving me a summary for that month.
I need my macro to copy and paste from one worksheet to another, which is fine. However I need the copied value to be pasted into the last empty cell in a specific column. It is currently pasting each copied value into the last empty cell in column 'A' regardless of which column I specify it to copy to in my code.
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file: Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
I am trying to do is create an invoice log of payments received. For each payment there is a cell value of how many products the customer has which is updated on each payment entry. What I want to do is have a macro that runs when all other data is entered to update this value.
So I have a main customer sheet where it holds the product amount in the same workbook, let's call this cell $A$1 holding a value of 47. I go to enter a payment record on the invoice sheet, once this is complete the macro will run and look to $A$1 on the first sheet and update $B1 on my invoice sheet. On the next entry it will update $B2, then $B3 and so on.
-For each row between A3 and A5000 -If cell in column L is empty -Do Nothing and move on to next row -Otherwise if cell in column L is not empty -Copy entire row to alternate sheet, and delete row from original sheet. -After all rows between A3 and A5000 have been checked, sort alternate sheet in ascending order based on the contents of column A.
The issue is that the code keeps skipping some rows that should be copied, possibly due to the 'for each' command not liking how I'm deleting rows (maybe?)
VB: Private Sub Worksheet_Change(ByVal Target As Range) Dim rCell As Range Dim lRow As Long lRow = Range("A3:A5000").Rows.Count
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Sub transposedata() Sheets("ConsolidatedYTDReport").Select Range("E2:H4202").Select Selection.Copy XXXXXXXXXXXX ActiveSheet.Paste End Sub
I'm trying to find a macro that will copy data from the areas of B120:E179 and I120:K179 for example (linked to another worksheet within the workbook) and special paste (Values Only and skipping blank cells) it to the next available open cell up top where basic data entry will be taking place B10:E29 and I10:K29. I need it to only copy/paste the rows with data (skipping all cells/rows with no data) and once it is finished coping I will need it to place an "X" in column M next to the row that it copied data from. I would also need it to reference the data in each row from B to E and if there is an entry say on B14 to E14 that matches it but if I10 to E29 are blank then paste that information on row 14. If it does not match or if those columns are full then paste on next available line.
I hope I'm making sense here. This is for a vehicle tracking log between checkpoints. Each driver and info will be listed on each row. Columns B through E will contain information for each driver: name, badge, #passengers, and vehicle #. The log lists location, time, and destination for outgoing travelers in columns F to H. Incoming info is listed on Columns I to K............
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells A40 A41 A42 A43
I am using the following macro which copy and paste certain info from one sheet to another. The macro I am using is
Code: Sub test() With Sheets("Invoice") .Range("A4:C17").Copy Sheets("Transactions").Range("b" & Rows.Count).End(xlUp).Offset(1).PasteSpecial Paste:=xlPasteValues End With End Sub
Is it possible to copy the value of B2 in the sheet (Invoice) as well and paste it for as many entries there are in the rows 4:17 in the sheet "Transactions". For example say i have items in row 4:10 when it copies the info to the sheet Transactions then it must copy the entry that is in B2 on sheet Invoice also in column a 4:10.
I would like to copy several cell entries from one worksheet ("Entry") and paste then into a new line of another worksheet ("Contact DB") which will serve as a repository/database. Ideally, I would like to clear the values in the first "Entry" worksheet once this is done.
The thing that is throwing me off is that the data entered into my first "Entry" worksheet is not all on one row. However, I have recorded all the starting point references and destination cells (i.e. "B2" from "Entry" --> "A5" of "Contact DB") so it's ready to go into code.
Using the following code (which I tested for copying and pasting the first cell of interest) but I can't seem to get it to work:
Code: Public Sub Macro1() Application.CutCopyMode = False Sheets("Entry").Range("B2").Copy Sheets("Contact DB").Range("A5").Paste
End Sub
I'm brand new to vba so I'm struggling to understand the code and where it goes. That brings me to Q2 (and a dumb one it is). Where do I put this code? I already have one bit of code (for allowing multiple entries in a dropdown list) for the "Entry" worksheet under the "Microsoft Excel Objects" folder. Is this where this copy and paste could would go too? Or do I need to insert a "module?"
I have this Excel File which has some sheets. All sheets are the same format like this: "I have read-circled the cells of interest"
I want to have a macro that can read the data from all the sheets (regardless of their name) and from the specific cells "red-circled" and copy and paste them into new sheet named "Report" in table format. Like this:
Someone created a macro for me that creates and names worksheets based off of a list on my first worksheet "Summary". I would love to be able to then have the list of titles on Summary sheet be in cell A1 on each of the worksheets that I had created.
Here is the macro for creating all of the worksheets w/ names -
I have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
I need a macro that will examine column A starting at A2 and working its way down copying the data in the first cell (A2) and then delete that row. If the next cells are empty (usually the next 5 cells) it should paste this copied value in each of the empty cells until it comes to the next cell with data in it. At this point it should copy this next value and delete the subsequent row and copy this value in each of the empty cells directly following (again, usually 5) until it finds the next cell that has data in it. At this point, again the whole process begins again repeating it self until it comes to the end where no more data is.
I am trying to find a macro that will filter on Column F (non-blanks - just cells with dates) cut just the filtered data (A:G inclusive)without the Header Rows and then paste/move this data to the first empty row on another sheet called "Complete"
So that I get the cells in columns A:G with dates in moved to the "Complete" tab and they are no longer in the sheet "Deliverables"