I need to find the first non-empty cell in a range and paste a constant value into the preceding cells.
aa bb
aa bb
aa bb
aa bb cc
aa bb cc
aa bb xx
aa bb xx
aa bb xx
aa bb cc
aa bb cc
I need a macro that will examine column A starting at A2 and working its way down copying the data in the first cell (A2) and then delete that row. If the next cells are empty (usually the next 5 cells) it should paste this copied value in each of the empty cells until it comes to the next cell with data in it. At this point it should copy this next value and delete the subsequent row and copy this value in each of the empty cells directly following (again, usually 5) until it finds the next cell that has data in it. At this point, again the whole process begins again repeating it self until it comes to the end where no more data is.
Here is an example of what I need done:
This sheet:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] ...
Should look like this:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] .....
I am working with arrays that extend far beyond their actual content, and so i am looking for a way, through macros, to find the first blank cell in a column and then copy all preceding cells in that column.
View 8 Replies View RelatedI am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I want to copy a value in "A1" and i would like to paste it in Column "J" but the problem is that there are some values in column 'J' so i want a code that finds the first empty cell in column "J" and paste in there the value from "A1"
View 8 Replies View RelatedI am using MS Excel 2000. Sheet1 is my working sheet. Cell A17 displays the current date (dd/mm/yyyy). Cells B17:K17 display my summary figures for that day. What I would like is a macro button that would look at the date in Cell A17, and if it is the first of the month …. eg 01/03/2005 it should insert a new sheet into the workbook and put the name Mar05in this case or what ever month it is on the tab. It then copies Cell A17:K17 and pastes the data in to the corresponding monthly sheet starting in A3 to K3. Because my working sheet (Sheet1) is updated with different data daily the new summary data (always in A17:K17) needs to be copied and pasted under the previous days entry in the corresponding monthly sheet. For the month of March I should end up with 31 entries giving me a summary for that month.
View 7 Replies View Relatedi need a method to find the end value in a row (right side) and select the empty cell to its right to paste data in.
problem is the row where this data is may change so using
limit = (row, col).end(XlRight).Col
I want a macro which will copy all the data from sheet 1 in columns A:C ignoring any blanks
then paste it into the first free cell in column B of sheet 2
i need to have 6 or so cells copied and pasted into another sheet. (when a button is pressed) However before the data is pasted it checks if there is anything in the cell(s) that are being pasted into, if there is something then move down a line and paste. Here is the code i have already:
Sub Order2Invoice()
Sheets("OrderDatabase").Select
Range("B65536").End(xlUp).Offset(1, 0).Select
With ActiveCell
.Value = Orderform!G5.Value
.Offset(0, 1) = Orderform!E10.Value
.Offset(0, 2) = Orderform!E11.Value
.Offset(0, 3) = Orderform!E12.Value
.Offset(0, 4) = Orderform!E13.Value
.Offset(0, 5) = Orderform!E15.Value
.Offset(0, 8) = Orderform!E15.Value
End With
Sheets("Invoice").Select
End Sub
I want to insert some data in a number of cells (e.g. A1, B4, C4 and H8) on a worksheet ('Sheet 1').
I then want to press a button and have some code that:
Looks at column B on 'Sheet 2'
Finds the next empty row Copies and pastes the information from Sheet 1 into specific cells in that empty row.
I have cells 9 selected (9 columns by 1 row)
I need to paste these cells to the empty cells below.
The problem is that the first empty cell below could be any given row number (it will be dynamic) and the last row will also be any given row number (also dynamic).
How can I paste these 9 formula's to all rows below?
I have a column of data in a range with some empty cells, I am trying to copy this data and then paste it into another column immediately after the existing data but without the empty cells, I am currently using the record button on the macro and copying to another column and then sort up a-z then copy again and paste. Long winded and sometimes still gives me a empty cell.
A
B
C
D
COPIED TO ANOTHER COLUMN
EXISTING DATA
EXISTING DATA
A
B
C
DRange("E3:E51").Select
Selection.Copy
Range("O3:O51").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
[Code] .......
My spreadsheet is sorted in numerical order in column A. Column B through AA only sporadically has data, although the data is present in full throughout each row. How can I add to my macro to copy the first full row of data (B#-AA#) and paste until it reaches the next row of full data and then repeat the same process. The biggest issue is once it reaches the last row, I would like it to paste the data in 29 additional rows.
1
22
13
2
1
56
54
65
[code]......
I have been using this code I found awhile back to fill blank cells in a column with the preceding value. but it leaves the very last cell blank. Like this.
A
B
41055182
905182
41054750
905182
[Code] ........
Is there a way to add possibly a "Do until column B is null or """?
Code:
Sub FillBlanks()
Dim rRange1 As Range, rRange2 As Range
Dim iReply As Integer
If Selection.Cells.Count = 1 Then
MsgBox "You must select your list and include the blank cells", vbInformation, "OzGrid.com"
[Code] ........
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
i want to find all the empty cells in column M & N within the data range and input formula into them. How can i make it to input the formula only within the data range (maybe can take reference to data in column E, only when there is data in column E then empty cells in M & N will input with formula)
View 7 Replies View RelatedThe following code is intended to copy and paste the value from cell I2 to the first unused cell in column K. There is is header in cell K1. It works fine if there is a value in K2 or K3, etc., however, if K2 is blank (all cells beyond K1 are blank) I get an error 400 when I run the sub.
View 14 Replies View RelatedI'm have never learnt VB before and would like to try to write one to perform the following: If the next cell isempty, go to the last cell, copy it and paste into the empty cell; Else if the cell is not empty, go to next line and repeat the procedures until reach row =10000
.(BEFORE)
Row 1:Product A
Row 2:
Row 3:
Row 4:
Row 5:Product B
Row 7:
Row 8:
Row 9:......
I need the code to paste my selection in worksheet SORT, into the first available cell in column A. Intention is not to overwrite existing values in column A.
'
Sheets("tis").Select
Range("AC2").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Sheets("SORT").Select
'I need the code to paste my selection in the first available empty cell in column A, so I don't overwrite any existing values in column A
End Sub
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View RelatedOne of my datasheets by necessity ends up as about 25,000 rows long, but only about 40 of those rows have data in. The rest of the rows are empty.
If a row has data in, there will be data in every column on that row, for example if row 2 was not empty, there would be data in A, B, C . . . and all the way to the last column without missing cells along the row.
I need to copy those 40 rows without blank rows in between. At the moment, I have a macro that deletes blank rows, but it takes hours to run.
This is the code that's being used at the moment:
Sub DeleteBlankARows()
Dim r As Long
For r = Cells(Rows.Count, 1).End(xlUp).Row To 1 Step -1
If Cells(r, 1) = "" Then Rows(r).Delete
Next r
End Sub
I want to create a macro to paste some data into the next empty cell. Below is sort of what I need but this show it going to a particular cell, I need it to got to next open cell in the range from say BY3. So next macro run it would copy and paste the data from T3:T9 (always this range) to BZ3 then CA3, CB3 and so on.
[[Sub CopyData()]
'
' CopyData Macro
' Copy The Data To Build Graph
'
[Code]....
I have 2 worksheets, one called "Consolidated" and one called "Converted".
I would like to have a spreadsheet where I press the update button and a macro runs that searches for the word "Converted" in column E on the Consolidated spreadsheet (the original). When it finds it, I would like the entire row to be cut and pasted onto the "Converted" worksheet.
I have managed to do this with my current code:
[Code] .....
However when this macro runs, the row left behind on the original sheet is a blank row and I don't want this. I would like it to be continuous spreadsheet, not dotted with random blank rows!
I would like a macro that will select the 65536th row to be used to paste format from rows 2 to the last empty cell in column a.
View 5 Replies View RelatedI need my macro to copy and paste from one worksheet to another, which is fine. However I need the copied value to be pasted into the last empty cell in a specific column. It is currently pasting each copied value into the last empty cell in column 'A' regardless of which column I specify it to copy to in my code.
View 5 Replies View RelatedI have this macro and at the present time, can only compare two worksheets. One of my worksheets contains column headers with data, the other worksheet just contains column headers. The macro will match the data against the column header and paste below. I'm doing it this way because I have several tables I export from a MySQL database, but some of them have more fields than others so I was trying to get all of the data to line up in under the correct column header from each table. I need editing the macro to allow for
1) More than one worksheet to be analyzed at a time
2) If the first request is not possible, I would like for the macro to paste results at the next empty cell. As of now, it will only copy one at a time (which requires me to house the data in another worksheet everytime I run the macro).
Below is the code:
Dim ws1 As Worksheet, ws2 As Worksheet
Dim HeaderCells As Range, Hdr As Range, hdrFIND As Range
Application.ScreenUpdating = False 'speed things up
Set ws1 = ThisWorkbook.Worksheets("HEADERS") 'Define name of worksheets
Set ws2 = ThisWorkbook.Worksheets("B")
[Code] .......
I am trying to write a macro to do the following: Loop through a range of cells on a worksheet Sheet1 M17:M46 and if there is text in the cell then Copy all the data to the left Of Coumun M in the same row and paste the values to the next open row of a range A17:L46 on another worksheet (sheet2.) Basically the text in column M is an idicator to add the data to an order sheet. If there is no text don't add the data , look in the next row etc.
I'm not sure if this is the way to go
Sub CopyRows()
Worksheets("sheet1").Select
FinalRow = Range("M65536").End(xlUp).Row
' Find the last row of data
' Loop through each row
For x = 2 To FinalRow
' Decide if to copy based on column M
ThisValue = Range("M" & x).Value
' could be any value
If ThisValue = "yes" Then
Worksheets("sheet2").Range("A" & x & ":L" & x).Copy
Worksheets("sheet1").Select
NextRow = Range("A65536").End(xlUp).Row + 1
Range("A" & NextRow).Select
ActiveSheet.PasteSpecial = xlValues
Worksheets("sheet1").Select
End If
Next x
End Sub
I am trying to do is create an invoice log of payments received. For each payment there is a cell value of how many products the customer has which is updated on each payment entry. What I want to do is have a macro that runs when all other data is entered to update this value.
So I have a main customer sheet where it holds the product amount in the same workbook, let's call this cell $A$1 holding a value of 47. I go to enter a payment record on the invoice sheet, once this is complete the macro will run and look to $A$1 on the first sheet and update $B1 on my invoice sheet. On the next entry it will update $B2, then $B3 and so on.
i have the following code, what it does is, it locate those empty cells in column M and insert the formula "=TODAY()". What i need the code to do is only insert to the empty cells in column M if there is a value(as long as is not empty) in the reference cell of column E.
VB:
VB:
Private Sub CommandButton3_Click()
Dim wks As Worksheet
Dim rng As Range
[Code].....