Find Highest Value And Populate Newly Inserted Rows With Unique ID?
May 8, 2014
I want to find the highest value in a column (MaxValue) and populate first blank cell in a column with Maxvalue+1. Basically, I want to provide each new row with a unique project number. First, I'm running a macro to insert rows which copies the formula and format from Row 4, the user enters how many rows he wants and the requested number of new rows are inserted below Row 4 (That bit all works fine) . I now want to find the highest project number that has been used in Column 1, starting at Row 4, increment the highest project number by 1 and populate the newly inserted rows with the new project number.
I have a couple of problems with code I'm trying to use: If the active cell in column 1 is highest value the code ignores the active cell, i.e. this works once, as the cell that I have just populated becomes the active cell and the highest number, i.e. the next time the macro runs I get the same number as the active cell.
Ideally, I'd like use the number of rows that the user requested in the macro to insert new rows to be used in this macro to provide a unique project number for each of the newly inserted rows. (The add new rows macros uses Dim NoToAdd As Integer, as the number of rows that the user wishes to insert). Although, I'm quite happy to run the macro several times to find and populate projects which have not been allocated project numbers.
What I want is that everytime a new blank row is created, the formula in the Days in Situ column is there as well (but obviously the cells update depending with which ever row it's in.. eg below formula is row 10.).
I am trying to create a filterable To-Do List. My goal is to enter each item with a userform, which I have created and pops up upon clicking the "Insert" textbox. making the following macros happen:
1) I would like to insert the new item in a row at top of existing info, below the headers, with the populated information from the userform when you click the "Add" Commandbutton on the Userform.
2) I want to make sure any filtering is reset whenever a new item is entered so the list reverts to original appearance.
What I would like to do is on a sheet when I insert a new row that it will "FILL" the formulas that are the row above it. For example I have cells A1-F1. On cell A1 there is 1, B1 there is 2...etc. When I then insert a new row I would like the row below A1-F1 to read. A2 = 2, B2=3 so it had a linear growth. I want to do this with my formulas so whenever someone adds a new line it knows to copy the formula as well but only in certain cells if possible.
I would like to do is in cell B8, copy each row of text to a newly inserted line below. The highlighted cells in yellow have been done manually as an example. I have about 50 groupings of these to do manually. I'm making an effort to learn VBA.
I am using Excel 2010 and have the problem as shown in the attached file.
Input Sheet shows the Data I have at present Output Sheet is the desired result.
I need a macro which should create an "Output" sheet by doing the following on the Input Sheet
1)Insert a Blank Column before Column A 2)Unmerge the Region Heading and insert the respective Region Name in the newly inserted Column. Region Heading will be in Bold Font. 3)Repeat Step 2 for all Regions 4)Delete the Rows which was merged.
Please note that the number of Data Rows will vary for each Region.
I have shown two Regions for explanation purpose only. There will be several Regions in reality.
I am wanting to find rows that with unique values in the first column, and then take those rows and display them in a more readable format. The section titled input is an example of information that would be pulled from a query into Excel. The Desired Output section is how I would like the info to be displayed. If this is possible without VBA then that is even better.
There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
I have some code that sits behind the worksheet_change event that recognises that I have just inserted a row into the active worksheet and it is happily telling me that I inserted one row.
What I also need is the actual row number that I just inserted but I cannot seem to find the right syntax to return the value I need
I would like to atribute a property (like colour) to any new row inserted in the spreadsheet. I'm struggling to find the correct way to reference a all inserted rows.
I have some columns with formulas in it. at the end of the column (used range) i have a row with total values of individual columns. However, Whenver, I insert a new line, then the formula of that particular column is not applied to the new rows inserted. does any one know why? If it is not set automatically, How do i enable it do be done?
I've applied a basic multiplication formula =D12*E12 in a table Column F, also I've filled it throughout but now if new rows are inserted in between or at the end of the table, new cells in this columns doesn't include this formula.
I'm trying to wrap my head around this. I have in a formula in one sheet pointing to a cell in another. Once I insert a row the formula adjusts. I need them to remain static.
I have tried searching, however I'm not 100% on the terminology.I have tried the F4 shortcut and put the $ signs in, however they still change.
I have a file with a lot of tables of different sizes. The table ranges have not been named. I would like to use a macro to insert 20 blank rows between each of them.
I have a spreadsheet that gets updated from the top. Is there any way for me to mod my formulae so that they always begin with the topmost cell (row 2 in this case, and in many columns) but still extend downward?
More practical example:
I have an Average formula in column X which (at the moment) averages X2:X75. I would like, even when adding new rows at the top (in the row 2 position) the forumla to not need to be manually extended with every new entry. So, if I add three more entrie4s, it will then average X2:X78. I tried all manner of absolutes.
I have a workbook with multiple worksheets, recording time in and time out of temporary employees. The first worksheet is a summary of each weekly timesheet. I would like to make it so the names only have to be typed once and will fill in on the subsequent sheets. I linked the cells, but since the employees may not work every week--we do not know in advance whether they should be included on the time summary at the beginning of the month.
Time Summary Worksheet Last Name..First Name..Reg Time..OT Bilson.........Bill.............40..........12 Samson......John...........40..........5
Time-Week 1 Last Name..First Name..Day1..Day 2, etc. Bilson.........Bill.............12....14 Samson......John...........8.....10
Time-Week 2...
The problem comes when I try to add a row for a new employee. If I add it to the Time Summary worksheet all the data in the Weekly timesheet worksheets is thrown off.
I have the macro to insert rows every nth row, but need to be able to insert text into that nth row.
I have a list of addresses and every 10 addresses i need to insert a 'seed' which will be have the same details everytime. This is what i have so far...
Sub InsertRowsMod10() Dim r As Long r = 10 Do Until Len(Cells(r, 1)) = 0 Rows(r).Insert Shift:=xlDown r = r + 10 Loop End Sub
I have a sheet with a company name in column A, and a list of comma separated values in column B. I can easily convert column B to multiple columns with the Text to Columns function, but then I'd like to insert each individual value in a new row in column B.
So, at the moment I have data that looks like this:
Company A Value 1, Value 2, Value 3, Value 4, Value 5
build a spreadsheet that reads information off of a Master sheet onto 4 other sheets. The hope is that by making changes ONLY to the Master sheet that the other 4 will update automatically.
And then we ran into the trouble of not being able to insert new lines onto the Master sheet without throwing everything off on the other sheets.
(I've attached an example.)
For instance, if I go to the Master sheet in the Test.xlsx attachment, I've left out Lima from the alphabet. So, I insert a new row onto the Master, switch back to the Formula sheet where it should (theoretically) just update the cells to display the new data.
Not so. The Formula sheet just skips the new A13 and keeps on going.
the primary one seems to be using Offset. Well, the coworker will be adding and deleting many, many rows over the course of the year, as it is a product log and we change our products often.
I have a massive amount of data made up of values taken every five minutes over several months. I want to find the highest value in a day for every day. I'm wondering if the best method is to define each day as a dynamic range and then use the max value command to get the highest value?
I have a combo box (from the Control Toolbox toolbar). I like this to be populated with the contents of column A. however, in column A there can be duplicates. I obviously don't wan't any duplicates in the combobox.
I have a large spreadsheet of data that contains 3 columns: Columns are Name, Revision, # of items. I want to find the # of items for the highest revision for each name. List looks like this:
I have a spreadsheet with a data sheet and a second sheet. On the second sheet I want to look up the value from A2 and find the highest date associated with this value in the data sheet.
This will be used to look at a number of projects that have multiple dates, and I want the latest date i.e. the furthest into the future. To add a spanner to the works, some dates are recorded as N/A so I obviously want to ignore these. I have attached an example workbook if anyone has a couple of minutes to take a look.
Populate Adv Filter Criteria from Inputbox with valid data
I've set up a macro to extract 3 different sets of data using Advanced Filter (same data range, different criteria & extract ranges)
There are multiple options (different individual dates) to satisfy the criteria (a date) for each of the 3 extracts and I want the user to select the criteria (a specific date) from the range of unique values in the data range upon which the Advanced Filter criteria is going to be applied. (A bit like the effect provided by Autofilter)
My initial attempt was to capture the criteria date from the user and populate a cell, and then have a vlookup function in another cell check if that crieteria value exists in the specified range. I then ran a loop in the VBA code until the value is valid (ie. exists in the range). However, to streamline this I was hoping to allow the user to see a list of the valid (available) dates when they respond to my Inputbox request for the criteria.
