What i want here is to align all the numbers considering the last used cell. In example table a; the last number is 0 (F8). Considering that, in the Result table B all the numbers are aligned in row 8 from the bottom to top giving an equal alignment to the table.
I have list of unique numbers on Column A and names on Column B. I have another set of unique numbers on Column C and counters on Column D. I have 100 numbers on Column A and I have 10 numbers on Column C. Every numbers on Column C exists on Column A. How do I match and align the unique numbers and have Column B and D in same row? (E.g. 100000 Jones 30). This question is very similar to the one discussed at Aligning Columns With Same Data?
I have searched numerous times for the answer I need, but no joy yet.
I have a spread sheet that has one column (call it 1) of data with a single entry each of 100, 200, 300, 400, 500, and so on.
I have a second column (call it 2) that has multiple entries of 100, 200, 300, 400, 500, and so on, and I want to sort so that the rows wind up with the numbers in column 1 all sorted in an accending order, but I want all the same numbers in column 2 sorted to "list" next to the same number before the next number sorts. See below for a small example of what I hope to see once it sorts. 100 100 100 100 200 200 200 200 300 300 300 300
Auto Merged Post Until 24 Hrs Passes;Unfortunately the example didn't post correctly..perhaps this will work but note that the x's are in column 1 and don't exist.
I have a macro that converts all my PDF Purchase Orders to a text file and inserts the data/text horizontally into another document. However because the PDF's or the text within the PDF can be fomatted differently (that is on different lines etc) it therefore imports the information and it looks mis-aligned.I have attached a simple spreadsheet showing some sample text as it is imported and then below this how it should look like, all in line.
The range where the highlighted text in red is, is variable (but say nothing more than a variant of 10 columns). The text can also be Uppercase or Lowercase.So, I was wondering if there is macro code to find the "text" on various rows/columns and align it all in another column?
I need find consecutive Numbers in a singles Cell but each numbers have a leading zero and "-" (Dash)
My problem is that the UDF that i found on this forum, is for numbers with out leading zero with comma ",",
So even if change the "," by "-", still getting a error Because the Code is designed to Read numbers Formats different than mine..
My Numbers are located in Cell G12 (down), and the message that i need to show in the cell result is :
If Found : 0 Consecutives --> 0 2 Consecutives --> 2 3 consecutives --> 3 4 consecutives --> 4 5 consecutives --> 5 2 Set of consecutives --> 2S
Example of 0 consecutives --> 01-04-07-12-25-30 Example of 2 consecutives --> 01-02-07-12-25-30 Example of 3 consecutives --> 01-02-03-12-25-30 Example of 4 consecutives --> 01-02-03-04-25-30 Example of 5 consecutives --> 01-02-03-04-05-30 Example of 2 sets of consecutive s --> 01-02-07-12-25-26
BTW my numbers start on Cell G12 down.. ______G12_______ 01-02-03-20-21-25
I'm faced with receiving data for time, in a text format, as follows:
Example of possible cell contents...
20secs 40m20secs 2h40m20secs
I'm not interested in the secs value but need to isolate the h (hours) and m (mins) values to use in another formula as numbers. The time could be shown in either of the above formats with either; (a) just secs, (b) mins & secs or (c) hrs, mins & secs... and of course the hours or mins values could be 1 or 2 digits in length. How can I determine (using formula only, not vba) what the values for hours and/or mins are dependent upon what is present?
I have a set of data in once cell and its strung out. I'm trying to pull the numbers that follow certain words from that data. That's easy enough with the find and mid function for the first one. But after that I have a repeating word (see below) and different numbers that follow it. So I want to pull the second number string after that word, the third and so on.
I've attached an excel file that explains this better.
I have two columns of numbers (this week - Column A and last week - Column B). What I need to do is look at the numbers and pull two lists out in Columns C and D. In columns C a list of the numbers that are missing from last week in column D numbers that are missing that were added from the previous week. The two lists consist of about ten thousand rows of data.
******** language="JavaScript" ************************************************************************> Microsoft Excel - Book3___Running: 14.0 : OS = (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCD1This WeekLast WeekMissingAdded 21002103110311002310271032103210274103310331034104051035103410361055610371036 165571038   81040   91055   101655   Sheet1 [HtmlMaker 2.42]
These are some data that I have ( inputs and outputs). I was wondering if there is anyway to find this equation. I can get more data if that helps in finding the equation.
This is a pretty simple request, but i need a macro to Find Column M's Last Entry and to copy down the 3 following columns down to the value.
I need it to be dynamic in other words, The length of column M will vary depending on my file . If the macro knows Column M ends Here, then drags the boxes down starting from N3 to Q3 down to the last Entry in Column M.
I have a task that I need to perform every now and then. And even though I normally find my ways around in Excel, I can't find a working solution for this one.
I have a list of features that I need to match with another list and place them on the same rows in my sheet. The attached file contains 2 worksheets where "Before" shows my normal input, and "Wanted" shows what I need to do.
Cols A-E contains info for the first set of features, cols G and H is the cells I want to move. Please note that sometimes the G and H columns contains info that are not present in A-E, and then I need to move those features around as well. An example is present at the bottom of the "Wanted" sheet.
I have 2 columns one with blanks one without, the data can be anything. I need the 2 columns to line up, data matching up and blanks matching up. I'm attaching a spreadsheet with an example.
In the attached workbook there is a UserForm with five (5) command buttons along the bottom of the UserForm. I'm familiar with making them the same size and aligning tops. What I'm struggling with is how to distribute them horizontally. That is, to get the same amount of "white space" between them.
I've fought with this issue off and on for some time now and decided it was time to come to you for help. In the attached workbook there is a UserForm with five (5) command buttons along the bottom of the UserForm. I'm familiar with making them the same size and aligning tops. What I'm struggling with is how to distribute them horizontally. That is, to get the same amount of "white space" between them.
I have to filter data in one column and have it align with data in another column. I need to do this because I have hundreds of product descriptions that I need to match up with the appropriate images. All of the image names will be like the first row (1244-?????.jpg) The problem I am running into the text data I am downloading is not matching up with the images. I usually have more images than text and sometimes I will have text that has no corresponding image.
1244-540299.jpg Golden Poinsettia Triple Candleabrum 1244-540299.jpg http://img.auctiva.com/imgdata/1/3/2/1/0/4/0/webimg/539293145_o.jpg 1244-540300.jpg Poinsettia and Berry Triple Candleabrum 1244-540300.jpg
I am trying to get two shapes to butt up to each other. Unfortunately the shapes either leave a small gap or a slight overlay. I have tried using Ctrl + arrow key to move in small increments, but that didn't work. I have also tried adjusting the width of the rows, but the rows jump backwards or forwards to a number instead of staying with the number I entered. I want to create a seamless shape out of many different shapes.
Here's a weird one: I can't get some of my cells to align to center/left/right. Both the buttons on the toolbar and Format->Cells->Alignment won't work. The kicker is that other cells on the same sheet will center/left/right just fine. Is there some kind of formatting protection I inadvertently set?
I am trying to create a data sheet to simplify the filling of corporate documents on our company computer systems. I have a working system, flawed, but working. What I want is to simplify it and correct some mistakes I made when I first made it. At the moment the priority is the field for our serial numbers. They vary from 1 to 10 digits in length with a alpha-numeric system. Some serial numbers even include hyphens, but the hyphens need to be removed for the forms. My system uses a modified form to allow for hyphens, but my boss wants them removed. ^^'
Anyways, the serial number of an item is entered into the data sheet field and my macro breaks down the serial number piece by piece. On the form the there are ten blocks for each digit of the serial number and I have coded the macro to put one digit per box. The trick is that the serial number must be right aligned and any empty fields must stay empty. This is where my request comes into play. I have already programmed the macro to do everything required except remove hyphens. The problem is that it is a REALLY long macro using If Then End statements to to compensate for the varying lengths of a serial number. Is there anyway to simplify this task?
Public Sub SerialNo() Sheets("Data").Select
Dim SerialNo As String Dim SerialNo1 As String Dim SerialNo2 As String Dim SerialNo3 As String Dim SerialNo4 As String Dim SerialNo5 As String Dim SerialNo6 As String Dim SerialNo7 As String Dim SerialNo8 As String Dim SerialNo9 As String Dim SerialNo10 As String
I am a PhD student and have a series of coordinates for various DNA sequences. I need to generate an excel chart which will show all the sequences aligned one on top of the other, not like a stacked bar, but where no gaps are found between the bars. So that they appear as if they have ‘fallen down’ as you would see with ‘Tetris’. This would end up with a bell shaped chart, rather than a messy chart. I need to do this to demonstrate which sections of the entire sequence appear more often. Can this be done using VBA or is there a way to modify a chart? I have no previous experience using VBA so I'm close to pulling my hair out.
