I am a PhD student and have a series of coordinates for various DNA sequences. I need to generate an excel chart which will show all the sequences aligned one on top of the other, not like a stacked bar, but where no gaps are found between the bars. So that they appear as if they have ‘fallen down’ as you would see with ‘Tetris’. This would end up with a bell shaped chart, rather than a messy chart. I need to do this to demonstrate which sections of the entire sequence appear more often. Can this be done using VBA or is there a way to modify a chart? I have no previous experience using VBA so I'm close to pulling my hair out.
Following my bosses recent charting attempts involving multicoloured backgrounds, graduated bars, textured boxes, mis-matched fonts etc, etc, which frankly showed no information whatever, I was asked to simplify them.
I did so, as in the two attachments, but the response is now along the lines of "well, yes, but they aren't very exciting, are they?"
This is a pretty simple request, but i need a macro to Find Column M's Last Entry and to copy down the 3 following columns down to the value.
I need it to be dynamic in other words, The length of column M will vary depending on my file . If the macro knows Column M ends Here, then drags the boxes down starting from N3 to Q3 down to the last Entry in Column M.
I have to filter data in one column and have it align with data in another column. I need to do this because I have hundreds of product descriptions that I need to match up with the appropriate images. All of the image names will be like the first row (1244-?????.jpg) The problem I am running into the text data I am downloading is not matching up with the images. I usually have more images than text and sometimes I will have text that has no corresponding image.
1244-540299.jpg Golden Poinsettia Triple Candleabrum 1244-540299.jpg http://img.auctiva.com/imgdata/1/3/2/1/0/4/0/webimg/539293145_o.jpg 1244-540300.jpg Poinsettia and Berry Triple Candleabrum 1244-540300.jpg
In an Excel sheet; I am trying to match and align data in column C to data in column A, but it is essential that the data contained in the entire row (coln B thru to coln W) moves when Column C is matched and aligned with column A.
I have two sets of data from columns A:N (O is blank) & P:AC. Column A & P are account numbers. I want to compare columns A & P for exact matches, there will never be any duplicates in either of these columns by themselves. If there is a match I would like that entire row to align, if there is no match I would like a row to be inserted. I have attached a copy of a worksheet of what I am looking to have done.
I have list of unique numbers on Column A and names on Column B. I have another set of unique numbers on Column C and counters on Column D. I have 100 numbers on Column A and I have 10 numbers on Column C. Every numbers on Column C exists on Column A. How do I match and align the unique numbers and have Column B and D in same row? (E.g. 100000 Jones 30). This question is very similar to the one discussed at Aligning Columns With Same Data?
I have an issue with an export file which is produced in CSV format and needs to be aligned. I have attached a sample of what I refer to.
My Source excel file looks like:
ABC A-101 B - 202 DEF B-203 C - 100
The destination should align with the relevant column headers and place a blank if it doesn't match. Other have queried a similar thing, however my header and data and description is actually in the same cell with a dash separating them.
The output I want is:
A B C D ABC 101 202 DEF 203 100
There are multiple row of employees with varied column headings as its dependent on what system access the user has. The headings i.e. A,B,C for example is a fixed number of headers.
In my real data set the headers represents a 3 letter system prefix e.g. ZCR,ILP etc
Need formula to pic required data from Validation,
In the excel sheet Orange color (Data Validation) , If i select the data validation(Like, Jan-Orange- consumption) and corresponding data should display, so i required formula for that.
I have a combobox on a form that uses match required. When the user selects this box and does not type in anything then decides to change something else on the form an "Invalid Property value" pops up. Is there a way to get around this. I have tried to add "" to the combobox list but it is still not working properly.
I currently am using Data Validation drop-downs (which are identically referenced) in a number of cells (From J10 to J19). Each entry refers to a Crew departure &/or arrival time (based on an Aircraft schedule) and crew Subsistence & allowance ($17 per day). Referenced from “K10:K19” is USD currency:
I am trying to establish a way to specifically; select a particular day in the Data Validation drop-down menu (J10:J19) and a formula automatically converting the result to “USD Currency” for each of the 5 alternatives?
So in other words, each data validation cell will have 5 matching formulas pertinent to each specific orientation (Day)?
E.G.Select “FULL WEEK” from the drop-down option and “USD 120.00” is revealed / converted? Select “SATURDAY (DEPART)” from the drop-down and “USD 35.00” is revealed? ... “SATURDAY (ARRIVE)” = “USD 100.00” ... “TUESDAY (DEPART)” = “USD 85.00” ... “TUESDAY (ARRIVE)” = “USD 50.00”
The closest I have managed (with no real success) is as per the following formula: IF(T26="FULL_WEEK",X26,IF(T26="TUESDAY_(ARR)",X27,IF(T26="SATURDAY_(ARR)",X28,IF(T26="TUESDAY_(DEP)" ,X29,IF(T26="SATURDAY_(DEP)",X30)))))
I would be so incredibly grateful if somebody could help me (in laymen’s terms)?
I need to plot various data on top of stock charts.
This data could be irregular in date: it could be weekly, or simply random.
To plot this data by itself requires a Scatter Chart.
From what I know so far, you CANNOT DO THIS.
However, I suspect this could be done if I build a Stock Chart from scratch using a Scatter Chart.
Error bars can be used to make the tails, however, I don't know how they built the body bar which has the characteristics of a bar (border, and interior.)
But since I don't really need those two characteristics, I just need a wider error bar line that is provided in the chart edit window. I'm guess through a macro, there are wider line widths assignable.
I am looking for a creative way to display a pie chart within a data point marker of a line chart.
My database has 3 value columns, Type1, Type2 and the Total (Type1 + Type2) these are recorded per day (Date, in Column A)
I have a line chart that displays the total by date, but I want to find a way to display the percentage split of a particular day by type.
I was thinking to load the chart image into the Data point marker, but i don't think that is the best way as the data is updated daily and I would have to do it each day for a few line charts.
The other way I was thinking about was to have a generic Pie chat in the Line chart (Maybe in a corner) and the pie would update depending on way date series was selected or Mouseover'd)
the way that I am approaching it at the movement (Not the best way and by far not the coolest way. Is to have a list of all the dates in a column next to the Line chart and using some VBA, what ever date is selected in the column the pie chart displays the corresponding data. But eh challenge is that when there is alot of dates, I am going to be scrolling up and down.
I am using Excel 2010, but I cant not use the slicer's as the other users do not have 2010, they have 2007.
I have a spreadsheet created in Excel 2003 (which is what we use at work, unfortunately).
My employees periodically take a test to ensure they have certain items memorized (or are making progress to that end). The spreadsheet rows show all 46 of my employees, and their test scores. The columns are the dates that the tests are administered. I can create a line graph based on the chart data, and interpolate these data with no problems.
The problem is that there are 46 employees! 46 lines on the same graph make for a very cluttered, hard to understand visual. I want to simplify the view by "filtering out" some of the data.
I have an additional column in my spreadsheet for each employee's work area (Area 1, Area 2, etc), and another column with data based on first letter of last name (the values here could be "A-G", "H-M", "N-S" and "T-Z", for example). I figure i could filter my line graph based on these two columns. For example, somehow select just Area 1, and reduce the number of lines on the graph to 16. Or better yet, Choose "Area 2" AND "A-M" and end up with 7 employees (and therefore 7 lines on the graph).
Here's what i have tried:
1) Select the work area column, and use the Filter, which created a drop-down list at the column heading. When i use this drop-down list, i can easily filter the data in the worksheet by Work Area, but this is not reflected in the line graph, which still shows all 46 lines. The problem was that i forgot that i had set the Calculation Options to "Manual". Setting this to "Automatic" (or leaving it on Manual and pressing F9) solved the problem, as the chart now updates when i use the filters. Calculation options are under the "Formula" tab in 2007, or in Tools -> Options -> [either calculation or formula, i forget what it's called] in 2003.
2) Create several separate line graphs in several separate sheets. I wouldn't want to assign someone else the task of maintaining a spreadsheet of such inefficient design.
I need to merge data from sheet 2 to data on sheet1.
Sheet 1 data is in the format given below with start date in G column and campaign ID in column H.
Start Date Campaign ID
17-May-14 3834177
[Code].....
I need to look up Campaign ID of sheet 1 in sheet 2 and add all insertions and platform for that campaign to next columns i.e. I and J in sheet 1. For ex Campign ID 3834177 of sheet 1 has 5 insertions corresponding to it in sheet 2 hence the insertions and their Platform would transfer to sheet 1. Since Campign ID 3834177 is only in 2 rows on sheet 1, 3 more rows would need to be inserted in sheet 1 to accommodate 5 items and it would look like.
I am trying to combine data from multiple worksheets and make a chart. I have about 200 keywords in every worksheet (about 50), and some of them repeat themselves through worksheets and some don't. For every keyword, I have an associated value in the next column that I want to portray over time (each worksheet is for a different period).
So what I need to figure out is how to be able to pick any 10 keywords from the worksheets and put them in a line chart where I can see the associated value for each period for every worksheet so I can compare my keywords' efficiency. The tricky part is that some worksheets do not contain the keyword and other worksheets contain the keyword in a different cell than the previous wsheet.
the above information have following header ie. Location, P.O.Box, Address, Tel, Fax and Category.
every time one of the header inforamtion is missing ie. Address or P.O.Box, Or Fax, due to this problem every time cell address of information aganist header is change. supose in first copy/paste Tel inforamtion is in A15, but second time it may be on A13, and 3rd time it may be on A17 and so on.
I want to make a macro which search header ("Location", "P.O.Box", "Address", "Tel", "Fax", "Category" ) from a Range A1:A30. than down two steps to copy header information (75325412) and paste in fixed cell location C1:C5 (C1=Name, C2=Location, C3: P.O.Box, C4=Address, C5=Tel, C6=Fax, C7=Category) in same sheet. and repeat the steps to copy information aganist header from all header in Range A1:A30.
I have a chart with 3 data series. The series are located in columns A, B and C respectively. Series I is a general number anywhere from 0 to 100,000. Series 2 is also a number, but is is devided by series 1. So, if series 1 was 100,000 then series two would be 25,000/100,000 which is 0.25. Series three will always be numerator of series 2 or 25,000 in this example. The numerator, or the 25,000 will never change, so, in my example, series three will be a straight line across the chart because it is always 25,000.
In my example, the .25 is plotted on the left value axes, and series one is plotted on the right value acccess (secondary axis). Series three is just a line in the middle.
My problem is that sometimes the line, series 3, doesn't match the values in both the right and left values axes. So, if series one is 48,000, then series two would be 48,000/48,000 = 1, and series three would be 48000 - the straight line. The third series should be a line touching the 48,000 on the right and the number 1 on the left. It does touch the 48000 on the left, but is below the number 1 on the left.
I am trying to graph the following data in an area chart with line charts superimposed on the area chart. I have a lot of data (and a lot going on) so I'm trying to figure out the best way to show this in excel from a functional standpoing (i can't get this to work in excel!!) to also an asthetic standpoint (dont want it to look terrible or illegible). This is what I'm trying to chart:
1) Weather data (temperature) by region: So one region, would be: Northwest I would like the "area" (so a shaded region) to be the min/max of the temperature data for each month.
2) I would like to show the temperature for each year as a line graph on the chart - so you can see if a year falls in or out of the shaded region.
3) I would like to show a company's sales increases across the same months per year as separate line charts. I may choose to just show the biggest outlier year in the end... or to show 2006 (the latest data).
What I am trying to convery with the chart is that the company's sales is or is not tied to weather deviations. I have attached an excel file with the data. I haven't been able to use the area chart or get a two axis chart to work or get it to look even remotely professional.
I have a task that I need to perform every now and then. And even though I normally find my ways around in Excel, I can't find a working solution for this one.
I have a list of features that I need to match with another list and place them on the same rows in my sheet. The attached file contains 2 worksheets where "Before" shows my normal input, and "Wanted" shows what I need to do.
Cols A-E contains info for the first set of features, cols G and H is the cells I want to move. Please note that sometimes the G and H columns contains info that are not present in A-E, and then I need to move those features around as well. An example is present at the bottom of the "Wanted" sheet.
I have 2 columns one with blanks one without, the data can be anything. I need the 2 columns to line up, data matching up and blanks matching up. I'm attaching a spreadsheet with an example.
In the attached workbook there is a UserForm with five (5) command buttons along the bottom of the UserForm. I'm familiar with making them the same size and aligning tops. What I'm struggling with is how to distribute them horizontally. That is, to get the same amount of "white space" between them.
I've fought with this issue off and on for some time now and decided it was time to come to you for help. In the attached workbook there is a UserForm with five (5) command buttons along the bottom of the UserForm. I'm familiar with making them the same size and aligning tops. What I'm struggling with is how to distribute them horizontally. That is, to get the same amount of "white space" between them.
