I have a table that has:
in column a an number 1,2,3,4,5,6
in column b I have a code against each number
in column e I have numbers , 1,1,1,1,1,2,2,2,2,3,3,3,4,4,4 etc ....
What I would like to have is the code from column c replicates in column d that's matches the code from column c
I have attached a sample of what I need : Product Detail - Copy.xls‎
I am trying to use a PRODUCT formula to return the product of a list of numbers in a column, between 2 specified dates. The spreadsheet is arranged as follows:
Column BA list of dates
Column C & DNumerical data not used in any calculations
Column EThe numbers to multiply together
Cell A1Start date to be used in the PRODUCTformula
Cell A2End date to be used in the PRODUCT formula
The formula I have to multiply the data in column E, subject to the start and end dates in Column A is:
{=PRODUCT(IF(B15:B1000>A1,IF(B15:B1000<=A2,INDEX(B15:E1000,0,4))))}
This returns zero though works appropriately if I replace “PRODUCT” with a “SUM”.
Example Table A:
*ABCDEFGHIJKL1No. 1No. 2No. 3No. 4No. 5No. 6No. 7No. 8No. 9No. 10No. 10No. 10221418269124333324171165141728884321000125067775100860615906015712170712180910
Result Table B:
*ABCDEFGHIJKL1No. 1No. 2No. 3No. 4No. 5No. 6No. 7No. 8No. 9No. 10No. 10No. 10263214854241121253210609433610178011412288370151076151767788070121206015907910
What i want here is to align all the numbers considering the last used cell. In example table a; the last number is 0 (F8). Considering that, in the Result table B all the numbers are aligned in row 8 from the bottom to top giving an equal alignment to the table.
I have list of unique numbers on Column A and names on Column B. I have another set of unique numbers on Column C and counters on Column D. I have 100 numbers on Column A and I have 10 numbers on Column C. Every numbers on Column C exists on Column A. How do I match and align the unique numbers and have Column B and D in same row? (E.g. 100000 Jones 30). This question is very similar to the one discussed at Aligning Columns With Same Data?
View 6 Replies View RelatedI have searched numerous times for the answer I need, but no joy yet.
I have a spread sheet that has one column (call it 1) of data with a single entry each of 100, 200, 300, 400, 500, and so on.
I have a second column (call it 2) that has multiple entries of 100, 200, 300, 400, 500, and so on, and I want to sort so that the rows wind up with the numbers in column 1 all sorted in an accending order, but I want all the same numbers in column 2 sorted to "list" next to the same number before the next number sorts. See below for a small example of what I hope to see once it sorts.
100
100
100
100
200
200
200
200
300
300
300
300
Auto Merged Post Until 24 Hrs Passes;Unfortunately the example didn't post correctly..perhaps this will work but note that the x's are in column 1 and don't exist.
100
xxx100
xxx100
xxx100
200
xxx200
xxx200
xxx200
300
xxx300
xxx300
xxx300
See attached spreadsheet. I am trying to create one formula that will take the product of numbers in column B based on criteria in column A (want the product of %s in each year). Product if formula.xlsx
View 7 Replies View RelatedI got some functions from some of you to spot duplicate bar codes
the first function was this =IF(ISERROR(MATCH(D5;$D6:D$65536;0));"";D5)
the second next to it this =COUNTIF($D:$D;$D5)
and the third: =IF(COUNTIF(D:D;D5)>1;"DUPLICATE";"")
well fine but now I dlike to add the numbers of the 2 cells of those duplicate codes. In some cases I have more than 2 identical bar codes.
Example
4905524490831DPFV900B.CEU0649055244908312DUPLICATE
4905524490831DPFV900B.CEU502DUPLICATE
I have a column full of 10 digit pone numbers. All different numbers and many different area codes (No dashes):
Example:
3305555555
4583651586
4128563254
Is there a way to remove the three leading numbers from all of the numbers at once for the whole column?
I have a large list of phone numbers & some of the numbers do not have area codes. The area code is the same for all numbers. Is there a way to add the area codes to all of these numbers without keying all in manually
View 9 Replies View RelatedIf n = 5, then I want to generate a string like this: "1+2+3+4+5". Similarly, if n = 7, I want the string "1+2+3+4+5+6+7".
I can generate the consecutive numbers, but have not figured out how to generate the required string.
I am creating a billing sheet that has a column where charges are coded (to determine what they are for) and I want a "Grand Total" for everything followed by a breakdown "Total" for things with the same code. Is there a way to set SUM code to grab all numbers next to codes?? (EX. Column A is Billing Code, column B is Cost in $$; I want a total at the bottom that takes the different amounts in column B based on the various information/codes from column A).
View 2 Replies View RelatedI'm working on a order spreadsheet system, and I have one sheet called Product Details, where the product name, list price and product code are found, these link to the Sales order page, and I need them so that they can be added to.
So far, I have created a dynamic named range for the Product name on the Product details sheet, and linked the the range via a list validation on the Sales order sheet.
The drop down list displays the products and can be added to by typing new product names on the other sheet.
What I need now is that when a product on the sales order page is selected, it draws the the list price and product code data automatically from the sheet, I tried using a normal vlookup, but I couldn't get it to work. I also need the list price and product code columns to be 'dynamic' so new values can be added further along.
I would like to have a Macro to go from the first tab called "Start" and end up with the second tab "End" automatically. BAsically I need to take the product on each line under Tab Start and reproduce it for sizes 35-41 always ending with "-(size)". Then this new Product with Size needs to be multiplied one below the other for as many times as I have pictures (number shown under column B of the tab Start). Next to this value in column B of tab End I'd like the same name listed again but with the number 1, then 2, then 3, etc. as needed and the extension .jpg.
View 4 Replies View Relatedi need to look up a product based on the number and the qty. see the example attached.
On tab "Printer - S" 1 need to lokup the costs based on the product code 8 and the qty 100. How do i do this and make it adjustable for any range of priduct codes and qtys. Again, becuase this will be used on a Mac Office, i cannot use macros.
In the first sheet I have two columns, one for the product_id and one for the name of the product. So the Sheet1 is like a small database. The second sheet is for the orders.What I want is when I type the product id in the A column of the orders sheet(Sheet2) to auto insert the product name in the B column so i dont have to write it every time.
View 2 Replies View RelatedI'm creating a worksheet that gives a list of part numbers based on the product part code. In most cases I can use the following.
=LOOKUP(O6,{0,1,2,3,4},{"NONE (M25)","SMP-55-001","SMP-55-004","SMP-55-008","SMP-55-014"})
so this gives a part number depending on what number is placed in O6. What I need to do know is look at 2 different cells and for each combination of numbers give a different part number. so if A1 is 2 and B1 is 3 give a certain result.
I'm trying to convert various codes from one column of an excel spreadsheet into different codes in another column. I was able to accomplish this with "If" statements, however I'm only able to string together seven of these statements in one command. Is there a better way to add formulas for more than seven conversions? Below is a copy of what I've done so far with the seven converts:
=IF(ISNUMBER(SEARCH("WARN",J2)),"Warning",IF(ISNUMBER(SEARCH("PSSNAP",N2)),"Sales",IF(ISNUMBER(SEARCH("WARN",L2)),"Warning",IF(ISNUMBER(SEARCH("2699",L2)),"Warning",IF(ISNUMBER(SEARCH("4004",L2)),"Warning",IF(ISNUMBER(SEARCH("2036",L2)),"Warning",""))))))
I want to add about 15 more codes to convert within this formula but it's maxed out in the format I'm using.
I have a large dataset (24000 rows) that requires me to multiply two different columns of integers. In some cases, the two integers are both negative and multiplying them results in a product that is positive. I actually need that product to be negative rather than positive. I can't quite seem to figure out the best way to accomplish this.
View 5 Replies View RelatedI'm trying to create a supply order form. Is it possible to enter a product name in one cell and have the price for that product automatically appear in another cell? Is there a formula that I can use to make this happen?
View 2 Replies View RelatedI have several lines of code written in VBA without any tabs. All the lines of code are starting in same column.
I need to align the code, so that it is easy to understand.
Using VBA, how would I move an existing shape object over to the righthand margin?
I suppose what I need is something like:
VB:
ActiveSheet.Shapes("Picture 1").Left = activesheet.margin.right - ActiveSheet.Shapes.("Picture 1").Width
But how do I find "activesheet.margins.right"?
I would like to align a group of columns against another group of columns.
Columns G-L will not be changing. They have a certain amount of info I want to align with columns A-F
There are 30000 items in G-L and only around 3000 so far in A-F
Weekly I will import and reorder A-F and then want to realign them with G-L
This is a link to a sample of the original file: [URL] .....
This a link to how I wan the order to be : [URL] .....
As you can see there are many more rows in columns G-L
I will update columns A-F weekly and then want to realign G-L
I need a single cell to contain two elements, one left aligned and the other right aligned.
Result would look something like this, LeftText aligned to the left side of the cell and RightText aligned to right side of the same cell.
LeftText {all of the white space here between two text values} RightText
Merging columns is not an option; both values must be in same cell. Both text values vary in length with each run of the code.
All I can do as of now is plug in a bunch of spaces that will approximate the open space between the two values.
This is a pretty simple request, but i need a macro to Find Column M's Last Entry and to copy down the 3 following columns down to the value.
I need it to be dynamic in other words, The length of column M will vary depending on my file . If the macro knows Column M ends Here, then drags the boxes down starting from N3 to Q3 down to the last Entry in Column M.
I have a task that I need to perform every now and then. And even though I normally find my ways around in Excel, I can't find a working solution for this one.
I have a list of features that I need to match with another list and place them on the same rows in my sheet. The attached file contains 2 worksheets where "Before" shows my normal input, and "Wanted" shows what I need to do.
Cols A-E contains info for the first set of features, cols G and H is the cells I want to move. Please note that sometimes the G and H columns contains info that are not present in A-E, and then I need to move those features around as well. An example is present at the bottom of the "Wanted" sheet.
I have 2 columns one with blanks one without, the data can be anything. I need the 2 columns to line up, data matching up and blanks matching up. I'm attaching a spreadsheet with an example.
View 3 Replies View RelatedIn the attached workbook there is a UserForm with five (5) command buttons along the bottom of the UserForm. I'm familiar with making them the same size and aligning tops. What I'm struggling with is how to distribute them horizontally. That is, to get the same amount of "white space" between them.
View 9 Replies View RelatedI've fought with this issue off and on for some time now and decided it was time to come to you for help. In the attached workbook there is a UserForm with five (5) command buttons along the bottom of the UserForm. I'm familiar with making them the same size and aligning tops. What I'm struggling with is how to distribute them horizontally. That is, to get the same amount of "white space" between them.
View 8 Replies View RelatedI need to shift all the cells in columns B, C, D, E & F up a row to align with the names in column A.
I have code to delete the empty rows.
Start:
Bank Holiday 1 on a Week End
ABCDEF1YASMIN AKHTAR (YA1) 2 59038.753MARINA BELAIDI (MB2) 4 12325.55MARGARET CANT (MC6) 6 33002.25
Result Required:
Bank Holiday 1 on a Week End
ABCDEF1YASMIN AKHTAR (YA1)59038.752 3MARINA BELAIDI (MB2)12325.54 5MARGARET CANT (MC6)33002.25
I have to filter data in one column and have it align with data in another column. I need to do this because I have hundreds of product descriptions that I need to match up with the appropriate images. All of the image names will be like the first row (1244-?????.jpg) The problem I am running into the text data I am downloading is not matching up with the images. I usually have more images than text and sometimes I will have text that has no corresponding image.
1244-540299.jpg Golden Poinsettia Triple Candleabrum 1244-540299.jpg
http://img.auctiva.com/imgdata/1/3/2/1/0/4/0/webimg/539293145_o.jpg
1244-540300.jpg Poinsettia and Berry Triple Candleabrum 1244-540300.jpg
[Code] ...........