Here's a weird one: I can't get some of my cells to align to center/left/right. Both the buttons on the toolbar and Format->Cells->Alignment won't work. The kicker is that other cells on the same sheet will center/left/right just fine. Is there some kind of formatting protection I inadvertently set?
fyi, Excel 2003 on XP Pro, all fully updated.
I know how to center text from left to right, but how about from top to bottom?
View 3 Replies View RelatedI think I did something but I don't know What. I select a cell that has a 20 font Size I enter a number it show at the 20 Font. Now when I go some ware else in the work unselecting that cell the number went to font 10 and droped to the left bottom of the cell. When I select the cell again and select the the left middle and right to move the number it does not responed. It happens everyware in the worksheet.
View 14 Replies View Relatedraw data
(format number general & center align)
desired result
(keep format number & keep center align)
0
-
1
1
2
2
0
-
0
-
it's possible without VBA Coding?? assuming mark "-" is not text but instead number "0"...
I have the following code,
i would like to select columns A:W and center the text
Private Sub Workbook_NewSheet(ByVal Sh As Object)
Sh.Range("A1") = "W/O"
Sh.Range("B1") = "CUSTOMER"
Sh.Range("C1") = "DETAILS"
Sh.Range("D1") = "CUST PART NO"
Sh.Range("E1") = "STATUS"
Sh.Range("F1") = "NOTES"
Sh.Range("G1") = "DEPARTMENT"
Sh.Range("H1") = "DATE"
Sh.Range("I1") = "CUST ORDER NO"
Sh.Range("J1") = "DEL NO"
Sh.Range("K1") = "QTY"
Sh.Range("L1") = "SALE PRICE"
Sh.Range("M1") = "CARRIAGE OUT"
Sh.Range("N1") = "TOTAL SALES"
Sh.Range("O1") = "INT CODE"
Sh.Range("P1") = "SUPPLIER"
Sh.Range("Q1") = "COST PRICE"
Sh.Range("R1") = "CARRIAGE IN"
Sh.Range("S1") = "TOTAL HRS"
Sh.Range("T1") = "LABOUR COST".......................
I'd like to align the text in comboboxes to be centred vertically - purely cosmetic I know, but "pretty = better" in my book!
View 3 Replies View RelatedI need a single cell to contain two elements, one left aligned and the other right aligned.
Result would look something like this, LeftText aligned to the left side of the cell and RightText aligned to right side of the same cell.
LeftText {all of the white space here between two text values} RightText
Merging columns is not an option; both values must be in same cell. Both text values vary in length with each run of the code.
All I can do as of now is plug in a bunch of spaces that will approximate the open space between the two values.
I would like to know that if i have seat count available according to floor and weekly off are planned according to team, also seat allocations is given floor wise, however i want to know how many seats are available on each floor or any given day.
I have attached excel sheet : Seat Allocation.xlsx
I have a worksheet in excel that I have hidden columns from AA right to the end. Which gives the user a nice worksheet with everything to the right of AA hidden in blue. What I would like to do is now centre the worksheet in the screen and have the same hidden blue effect to the Right of the worksheet in this blue.
View 1 Replies View RelatedMy current spreadsheet shows text that's aligning just slightly to the left of center. In the Format Cells menu under Alignment, I have selected Center for both Horizontal and Vertical. There is no indent. Orientation is 0 degrees. Text is set to wrap. Merge cells is unchecked. Text direction is Context.
When I double click a cell to change the text, it centers correctly as the cursor blinks. But when I click somewhere else and it stops blinking and allowing me to type in the cell, it aligns slightly to the left of center.
I'm using Excel 2010. When I type 'true' or 'false' in any cell, Excel automatically changes to CAPITAL and Align Centre. I have to use the function 'lower' to change to lower case and manually to align to the left.
How to change the default setting.
Following is what I want to do:
Draw a line from the center of the first cell to the center of another cell.
I have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like
Variable 1
Variable 2
Variable 3
[Code].....
I have a task that I need to perform every now and then. And even though I normally find my ways around in Excel, I can't find a working solution for this one.
I have a list of features that I need to match with another list and place them on the same rows in my sheet. The attached file contains 2 worksheets where "Before" shows my normal input, and "Wanted" shows what I need to do.
Cols A-E contains info for the first set of features, cols G and H is the cells I want to move. Please note that sometimes the G and H columns contains info that are not present in A-E, and then I need to move those features around as well. An example is present at the bottom of the "Wanted" sheet.
I am trying to use Range.Find in a named range that has some areas where two cells are merged using the format "Center Across Selection"
Set rngTemp = wbMaster.Range("PnLDateRow").Find(what:=dDate)
I get a run time error 438 "Object doesn't support this property or method"
Is it not possible to use this method to find the cell in this range? I tried iterating through the range but that errors also.
I need to shift all the cells in columns B, C, D, E & F up a row to align with the names in column A.
I have code to delete the empty rows.
Start:
Bank Holiday 1 on a Week End
ABCDEF1YASMIN AKHTAR (YA1) 2 59038.753MARINA BELAIDI (MB2) 4 12325.55MARGARET CANT (MC6) 6 33002.25
Result Required:
Bank Holiday 1 on a Week End
ABCDEF1YASMIN AKHTAR (YA1)59038.752 3MARINA BELAIDI (MB2)12325.54 5MARGARET CANT (MC6)33002.25
Is there a way where i can have the figures in Red align with the corresponding description.
As it is when i run my report the account code will come on top of the description and i want to find a way to align them in the yellow cells.
I have a list similar to the one below. I need to compare four columns against each other and align matches alphabetically.
This is the data:
Nov
Dec
Jan
Feb
[Code].....
I tried using VLOOKUP but I can't figure out how to get it to return what I want in the format I want it.
I'm using the following code (found here: [URL]......) populate dates in row 13 for a dynamic Gantt Chart...
[Code] ....
It works perfectly to display daily dates in the mm/dd format. Now I want to have an overarching month/year displayed over the entire range for any particular month by merging and centering the cells above the month's dates the above code populates, and pull in the month/year formatted as mmm-yyyy. I've attached a mock up I did manually to convey the desired result.
MergePic.JPG
I have 10 columns that are as follows. Name, rank 04, name, rank 05, name, rank 06, name, rank 07, name, rank 08. The longest name and rank list is over 1200 names long. What I need to do is create 1, 3, and 5 year averages based on rank.
My question is, is there a way to sort alphabetically that will automatically align column a,c,e,g,and i alphabetically that will also align each row by name.
example:
name 04 05 06
joe 75 72
paul 82
carl 72 48
Joe isn't present in 05, Paul isn't present in 04 or 06, and Carl isn't present in 06.
Basically I need excel to add blank cells for people not on each years list so all names align.
I've got the following code and have been trying to make the cells in column 1 align TOP LEFT but haven't been able to.
[Code] .......
I'm trying to go down column a, look for a certain word, let's say 'excel', then return the value in the cell four cells to the right.
My best guest was
=offset(search("excel",a:a),0,4)
But the search function and the find function really aren't built for that.
how can i get this
Sheet1
ABCDEFGHIJKL7WTXMF31326154RIO TINTOAUDMLWSINBFSALE 258414.13 ML W/S INT BD FD 16-Mar-0917-Mar-09-251307.75N
how to set up a formula that would count the number of numbers in a column, only if the cells before those cells are blank. In plain English: total the number of occurences in each column, provided the value in cellrow is the first occurence in that row starting at column A. E.G
A
B
C
D
John
x
x
Dave
x
x
Kyle
x
x
Bob
x
x
Count would return under Column A, 1; under Column B, 1; (because row John has a value in AJohn it is ignored), under Column C, 2; under Column D, 0.
I am trying to count the # of empty cells to the left. I trying to work out how many days since an employee has missed. In this worksheet, a letter is placed in the cell corresponding to the day they missed. And I need to count backwards from a date (say: July 31st) to the last day with a letter in it.
View 13 Replies View RelatedMy question requires me to do a Vlookup question that needs to get the information in the next two cells over from the left most cell. In short I need to put info from two different cells from the same row and look up value into one cell.
View 2 Replies View RelatedI have a macro that activates a cell on row 30. The active cell could be either E30, F30, G30 ... etc.
I need a macro that sums all values from cell D30 to (and included) the active cell and returns this value to cell B1.
In my column B, I have different words like Balance, Notes, Expense, etc. Is there anyway I can look into column B, and if I get the word Expense, then take the number directly to the right of it (from column C) and SUM it? Not sure if it matters, but let's say I want to put it in cell C2. I figure this will allow me to do this like insert, delete rows in the future, but my equation in cell C2 will still add up what I need.
View 2 Replies View RelatedI'm trying to do is check each Row and move the last 3 Columns of data in each Row to the left so they fall under the headings NHA2, NHA1, and OEM PN (Columns U, V, and W). Columns A and B are temporary. Column A utilizes the formula "= COUNTA(B2:AG2)" to count the number of cells in the row that contain data. Column B utilizes the formula "=COUNTA(C:C)" to count the total rows of data in the active worksheet. Columns A and B will be deleted at the end of the Macro.
The GOAL (END RESULT) is for Columns A through W (and ONLY these Columns) to contain data (keeping in mind that Columns A and B will be deleted at the end). If some rows have Column W (and beyond) blank, then I want to MOVE data from Columns U & V over to V & W and then COPY data from Column T into the [currently] blank Column U.
I've been trying to get the Macro to start in the last row and, using CASE Statements, delete the proper range of cells and SHIFT LEFT as it counts backwards towards the first row. I'm not too sure this is the best approach and could really use some advice from the experts! I can provide a "test" file if necessary ... the test file I've been working with is approximately 6.5MB, but I can delete most of the 14,287 rows and still give a good representation of how the data varies.
Sub b_DeleteCellsShiftLeft()
' DeleteShiftLeft Macro
' Macro recorded 3/14/2007 by George Nicholaou
' Need to assign variable for current row (?)
' r=ROW()
' Columns A and B are temporary
' Column A utilizes the formula "=COUNTA(B2:AG2)" to count the number of cells in
' the row that contain data
' Column B utilizes the formula "=COUNTA(C:C)" to count the total rows of data
' in the active worksheet
' They will be deleted at the end of the Macro
' What I want the Macro to do from this point is:
' 1. Check each Row and move the last 3 Columns of data in each Row to the left so
' they fall under the headings NHA2, NHA1, and OEM PN (Columns U, V, and W)
' 2. The GOAL (END/RESULT) is for Columns A through W (and ONLY these Columns)
' to contain data (keep in mind, Columns A and B will be deleted at the end)
' 3. If some rows have Column W blank, then MOVE data from Columns U & V over to V & W............
I am having trouble filling a formulae series to the left on one spreadsheet, the fomulae being references to another sheet.
For example, I have two sheets 'Mtce Options' and 'Base Case'. In 'Mtce Options' I have the following formulae
A B C
1='Base Case'!A15='Base Case'!D15='Base Case'!G15
I want to fill to the left, incrementing the column references by a factor of 2 each time, eg. next two should be ='Base Case'!J15 and ='Base Case'!M15.
However, if I autofill to the left by highlighting A1, B1 and C1 or just B1 and C1 all I get is an inappropriate reference such as ='Base Case'!D15 or ='Base Case'!F15, respectively, in D15.