Finding Dynamic Cells
Jan 24, 2007
I'm working on a code that uses in conjunction with Dave Hawley's Kickbutt VBA. What I want to do is for Excel to find a range in Sheet1 after a cell that contains the word "Master Profiles". For example, cell A10 contains "Master Profiles", cell A12 contains "Apples". I want Excel to start finding from A10 for "Apples" instead of a define used range, since "Master Profiles" is not always on A10. Here is the code that I started working with. But somehow, I can't get it working.
Sub FindCell()
Dim rngFindRange
Dim rngFoundCell
Dim rngFirstFound
Set rngFoundCell = Sheet1.Cells.Find(what:="Master Profiles", LookAt:=xlWhole)
If Not rngFoundCell Is Nothing Then
Set rngFirstFound = rngFoundCell.Rows
'Search 50 rows after the cell contains "Apples"
Sheet2.[A1] = Find_Range("Apple", range("rngFirstRound:rngFirstRound+50"), xlFormulas, xlWhole).Offset(0, 0)
End If
Exit Sub
View 2 Replies
ADVERTISEMENT
Dec 28, 2011
I have a column that updates automatically by placing a value in in the next blank cell in the column. I am trying to write two formulas to identify the highest and lowest values in the preceding 10 cells of each update in the column but seem to be stuck in MIN/MAX/OFFSET hell.
View 8 Replies
View Related
Jul 9, 2014
=IF(COUNTIF('Deal Calculations'!E4:E30,"Pandy Mandy"),'Deal Calculations'!B4,"£0")
Above is one of the formulaes that I am using and I tried editing, to no avail.
Anyway here it is, I need to search E4 - E30 for a particular name, lets say Pandy. Now if pandy is found, then a cell on another tab has to equal a cell which is 2 cells on the left. from which the cell which contains the name is located.
here is a psuedo version of it...
Search E4-E30 Find a cell which contains 'Pandy' If pandy is found, 2 cells to the left then a cell on another tab is equal to that.
View 8 Replies
View Related
Sep 16, 2008
I have a row of cells with names. Alex, John, Martha, Jim, etc.
Each person has a list of data under them. I have a master column of data. Depending who is on duty today, I want the macro to find the person and then copy paste special the master column over the person column.
Thus, in the macro code where it says
Find(What:="John",
I want it to refer to a specific cell. I.e. what:=$E$4.
Then it must go to the cell it found and copy paste the info in.
View 14 Replies
View Related
May 14, 2009
If I want to find the Maximum value of the cells in A1 through A3 I'd do =MAX(A1:A3).
How do I do the same thing if the 3 cells I want to check are all in cell A1 in 3 different worksheets named 01, 02 and 03?
View 9 Replies
View Related
Feb 24, 2014
I'm looking for a formula in relation to the calculation of time.What I'm looking for is a way of finding the difference between the time two cells and it displaying it in the number of hours e.g.:
Cell 1__Cell 2__Cell 3
12:00 + 18:30 = 6.5 (it is 6 hours 30 mins but I want it displayed as a number.
View 5 Replies
View Related
Mar 28, 2014
I am trying to solve problem with finding cells (all searching cells are in 1 column ) witch contains only recurring characters like : 00, aaaaa, 444444444 , etc.
View 3 Replies
View Related
Feb 6, 2009
I want to create a conditional formatting formula, which marks products currently in stock.
Lets say that I have the following setup:
View 11 Replies
View Related
Feb 12, 2014
provide me a macro to give a particular message or Cell Name when the cell is blank. I have to check around Eight columns and the starting row is A10. Moreover the sheet can have different numbers of row at different time like some time only 50 persons data will be there and some times 60 or 85 like this but the maximum will be 300. So if the 50 persons data is there than it should not warn about row 51 onwards.
View 1 Replies
View Related
Apr 7, 2009
I need code in VBA that look for empty cells at a range and return msgbox with the empty cell
View 5 Replies
View Related
Jan 21, 2010
I'm working on a macro that's supposed to copy certain cells from a sheet, and paste them in another. But the problem is that I can't find a way to get them all in one go. The sheet that I am copying from has a mile-long list that looks something like this:
OR0220018NO-RING 21,95 x 1,78 N270 BS-0205,00
OR0220018N90O-RING 21,95 x 1,78 N290 BS 02022,00
OR0220018VO-RING 21,95 x 1,78 V275 BS-02010,00
OR0220018V90O-RING 21,95 x 1,78 V290 BS 02013,00
OR0220020NO-RING 22,00 x 2,00 N2709,00
OR0220020VO-RING 22,00 x 2,00 V28024,00
OR0220025NO-RING 22,00 x 2,50 N2705,00
It goes over 3 columns. I want to select column A, B and C in every row that contains the letters "N270".
View 2 Replies
View Related
Oct 26, 2008
I have a sheet that returns 4 numbers where 2 will match. Is there a command that will return that matching value?
For example:
cell 1 = 5
cell 2 = 9
cell 3 = 4
cell 4 = 9
something to return the value 9
View 2 Replies
View Related
Nov 19, 2013
I am looking to set up an excel doc with 2 sheets.
In sheet 1, I am would like to be able to enter a series of words of interest/criteria to be met (in column D).
In sheet 2, I would like to paste in the text from an individual's CV. The text would be entered en masse, meaning that some cells would be empty and others would have whole sentences/paragraphs of text.
I would like a formula to enter in column A of sheet 1 which would search all of the cells in sheet 2 for the word/words in column D of sheet 1 and return either a positive or negative value.
I had tried the following:
=(COUNTIF(Sheet2!1:1048576,Sheet1!D2)>0)
This formula, however, is not capable of extracting the desired text from a string/sentence, and so only returns a positive result if the desired text is in a cell by itself.
View 3 Replies
View Related
Feb 4, 2009
I’d like to return the range (or cells address) that includes text formatted in Bold and Arial font, this is always in Column “B”, so I’m actually behind the rows number....
View 9 Replies
View Related
Feb 20, 2009
I've got a very large spreadsheet wherein I need to write a formula for each row to find the first cell with any entry greater than 0 and then add to that cell the contents ONLY 5 cells contiguious to it.
For example data set is this (in .csv format for you)
(column headers)
Name, Jan01, Feb01, March01, April01, May01, June01, July01, Aug01, Sept01, Oct01, Nov01, Dec01, Jan02, Feb02, March02, April02, May02
Jones,0,0,0,0,5,2,7,9,3,10,13,4,8,9,22,7,9
Smith,0,0,3,8,17,23,9,3,16,28,44,7,6,9,10,5,12,19,10
I need formula to find first instance in each row of entry greater than 0 and then add to that the contents of next 5 cells.
Jones would find the 5 and then add the 2,7,9,3,10 to it for formula result of 36
Smith would find the 3 and then add the 8,17,23,9,3 to it for formual result of 63
View 9 Replies
View Related
Jul 7, 2009
I have 2 pretty large zip code lists, we will call them columns A and B. I know that I have some from A that match to zips in B, but I have alot more zips in B that don't match to column A. I need to identify all of the zips in B that do not match a zip in column A.
View 9 Replies
View Related
Aug 6, 2009
I'm having the following little problem, and i'm hoping that
someone here can help me solve it.
I have a number of rows containing data starting at row 1.
I already made VBA code which finds the last row containing data.
That row number is stored in the variable "LastRowWithData".
What i want to do now is the following.
In column B (in row 1 to the row number stored in "LastRowWithData"),
there are long code's which all have to be checked for unwanted characters.
Some of these unwanted characters are the "I" and "O" characters both in
upper case and lower case.
If these characters are found a messagebox has to appear, saying something
like "Illegal character found in cell ____".
If more than one cell containing unwanted characters are found, either more
messageboxes with the cell coordinates have to be displayed or one messagebox
displaying all the cell coordinates in which the unwanted characters are found.
Im planning to use a while - wend statement to check all cells for unwanted
characters. (While ActiveCell.Row LastRowWithData)
Is there a simple way to do this in (Excel 2003) VBA ?
View 9 Replies
View Related
Sep 3, 2009
Is there a way to return not only one cell but two with LARGE?
I'm still working on my top 5 sellers list and trying to generate the list correctly. As of now when I have multiples of the same value I get the same name. Here's what I have now:
Name---Sales
Bob---75
Sue---68
Tim---66
Tim---66
Tim---66
What I'm trying to do is this:
Name---Sales
Bob---75
Sue---68
Tim---66
Jane---66
Dave---66
View 9 Replies
View Related
Apr 18, 2006
I'm using this formula (in conditional formatting) to compare a cell with the previous cell (e.g. E11 compares to D11). If it is higher/ lower/the same, E11 is coloured accordingly.
=MATCH(E11,Grades,0)<MATCH(D11,Grades,0)
=MATCH(E11,Grades,0)>MATCH(D11,Grades,0)
=(D11)
However…. sometimes the data is not in D11 but C11 or B11. How do I tell excel to first of all look in D11 and only if the data is not there, to look in C11, then B11?
View 2 Replies
View Related
Jun 21, 2006
I am building an inventory simulation and have run into a problem. What i want is, when i change a number in cell H4, i want excel to find the sum of C25 and the cells "H4" up. If H4 is 5 then i need the sum of C20:C25...if H4 is 10 i need C15:C25. Does anyone have any thoughts on how to do this? I have attached a sample sheet to make it more clear.
View 2 Replies
View Related
May 10, 2014
I have value of 26 in Cell A1, for example and I want to find
whether or not that value falls with a range of cells B1:C2 (which is in another sheet) and if so return the value in D Range.
A1 B C D
26 20 30 100
How would my formula look?
View 6 Replies
View Related
Mar 21, 2014
I am writing a formula for finding a maximum out of three average values. The cells that will be populated with data are A1 to A5; B1 to B5; C1 to C5. The final cell where I want to write the formula needs to show the maximum of the three averages (average of data in each row).
The difficulty is that sometimes only the A and B rows are populated (and sometime only A row is populated) and if B and/or C are blank, the formula fails and shows "#DIV/0!".
How can I write so that if C is blank, then evaluate only A and B data. And If both B and C are blank, then just display the average of row A.
View 3 Replies
View Related
Nov 15, 2009
At my work we use excel to keep a large number of labels done in one day, those labels are then added up to give our weeks total, running total and average by day.
What i am looking to do though on a seperate sheet though is find out which day we had the most, an example of what it looks like
View 2 Replies
View Related
Nov 3, 2009
So this is something that I'm not sure is possible in Excel. I would like to use an "if,then" statement to see if a number is in multiple cells. I know this is usually very simple except there's a catch here. In each cell there's a number range using a "-". So in a single cell a range would be 301-305. I am open to having the range done a different way like 301,302...etc. I just decided this would be an easy way to look at it and was hoping to find a way to solve this problem with leaving in the dash. Whatever is practical is fine with me.
Using Example A in the attached file I want to use this statement, =IF(308 is in any of the ranges in A3:A6, TRUE, FALSE).
So, for me, the alternative I want to avoid is Example B where I would have to list every single number and then check the whole range. I would like to avoid this because these examples, as you can imagine, are on a much smaller scale then what I will actually be dealing with.
View 11 Replies
View Related
Nov 5, 2007
What I have is a massive table of data (15k+ entries), which consists of 4 different tables merged together. I have a lot of duplicate entries. However, most of these entries have information in one or another columns that its duplicate does not.
What I need to do is:
Identify the duplicate entries (by part number, which is one of the columns).
Merge the duplicate entries. In the merging process, I need to carry information over, taking data that is currently in 2 or more rows and merging it into one row.
Here's an example:
column1 column2 column3 column4
row1 a . . d
row2 . b
row3 . . c
needs to turn into:
column1 column2 column3 column4
row1 a b c d
If I'm not explaining this well, I will do my best to clarify. My main question is, is there any way to automate this process (even partially)
View 14 Replies
View Related
Nov 17, 2009
I have a pretty big worksheet (230 columns x over a thousand rows). Any given column might have 3-4 nonblank cells; the rest are blank. What I want to do for each column is obtain the address of each nonblank cell, then grab the contents of the corresponding cell in the B column and concatenate the results. In the attached example, I want to put the function in d2, and the expected result would be ar 001, fc 001, hw 003.
View 4 Replies
View Related
Dec 5, 2011
I have a list of about 100 cells that's going to have user-inputed data for varying cells that could repeat. For example:
AAA
(blank)
BBB
(blank)
(blank)
AAA
(blank)
CCC
etc.
I need a formula(s) for a second list that can find the non-blank cells and put them in order (not necessarily alphabetical).
View 9 Replies
View Related
Jan 9, 2012
I am trying to work out the 'Upper Percentile' of some donations we have received.
To do this I thought it would be rather simple, I just used
Code:
=LARGE(A1:A100,ROW(INDIRECT("1:9")))
This worked but obviously puts the values in 9 different cells, my work would like it shown as 1,2,3,4,5,6,7,8,9 in one cell.
View 7 Replies
View Related
Dec 15, 2006
I have a step in a very long macro to populate a sheet (SheetMaster) with the course completion status based on another sheet (SourceData) in the same workbook.
On "SheetMaster" Col E starting with row 2, I want to look at whether a concatenated value of E1 + A2 is in Col G in "SourceData". The macro should run until it gets to a blank row in Col A.
Here is an example to help illustrate the logic:
E1 = Ethics101
A2 = 123456
A3 = 654321
If Col G in "SourceData" contains "Ethics101-123456", E2 = "Complete", if not "Incomplete"
If Col G in "SourceData" contains "Ethics101-654321", E3 = "Complete", if not "Incomplete"
...and so on until it gets to a blank row in Col A...
View 9 Replies
View Related
Jan 9, 2007
My excel file was imported from a 3rd party and has many blank rows across the entire sheet.
I want to delete these rows if every cell across is blank.
How is this accomplished?
I tried the formula "=isblank(C2:C18)" however I get a "False response on those rows that are completly blank.
View 9 Replies
View Related