If I want to find the Maximum value of the cells in A1 through A3 I'd do =MAX(A1:A3).
How do I do the same thing if the 3 cells I want to check are all in cell A1 in 3 different worksheets named 01, 02 and 03?
How would you search multiple hidden sheets named JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Using a textbox to return a value to find on these multiple hidden sheets. The code must find Orange, Oranges Orange BLossom by typing in "Ora".
It then moves to the first value found on the first worsheet found and mekes it the active cell, asks with a msg box to find the next value and so on. This code works but it only finds the value on the sheet THAT userform was designed for in the sheet code page:
[code]
Private Sub CommandButton1_Click()
Dim ws As Worksheet
Dim MyValue, MyFindNext, FirstFound, LastFound
MyValue = Me.TextBox1
If Len(MyValue) = 0 Then Exit Sub
StartSearch:
On Error GoTo err_Trap
Cells.Find(What:=MyValue, After:=[A1], LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False).Activate
FirstFound = ActiveCell.Address
MyFindNext = vbYes
Do Until MyFindNext vbYes
I have a master project worksheet that has projects on it and costs it looks like the following.
Master Project Sheet
ABCDEFG1
Plumbing
Plumbing Invoice
Electrical
Electrical Cost
Flooring
Flooring Invoice
2Project 001
ContractorName
Invoice Amount
ContractorName
Invoice Amount
ContractorName
Invoice Amount
3Project 002
ContractorName
Invoice Amount
ContractorName
Invoice Amount
ContractorName
Invoice Amount
Individual Contractor Invoice ABCD1Project 001Job PerformedContractor NameAmount
** Note all invoices are in the same folder
I essentially would need the Master Project Sheet, to have instructions to say. Research the folder of invoices, when you find project number 001 and plumbing (job performed), then grab C1 and D1 off of the contractor invoice and place it into the corresponding project name on the master, in the case above B2 and C2. Is that possible?
Using 2003...
NameAverageLowHighAveFirstsSecondsThirds1Fuller2Krause3Huttenburg4Minter
I'm struggling to find 3 formulas/solutions for the table above:
1) I'm looking for a way to find the people's names from column B in all 10 worksheets on the doc. and average the values associated to that name. These values are found in column D on each of the worksheets.
2) I would also like to be able to find the lowest and highest values that are entered in column D from the 10 worksheets for each person.
3) I would like to count the number of 1's for each person in column F from the 10 worksheets. I would do the same for the number of 2's and 3's, as you can see from the table above.
I have 12 worksheets, each with a list of email addresses in the 2nd column. These are all email addresses that did not respond by opening/clicking our newsletters. I'm trying to find how many times each person did not respond in the last 12 emails sent. I will delete those that consistently do not respond to our newsletters. I know how to do a simple vlookup but have never tried across multiple sheets.
So I guess I want it to check all sheets for each email address and count how many times it appears on these No Response email lists.
Column 1 is an email ID, Column 2 is an email address.
Let's say I have a workbook with 7 worksheets named, for example, "Instruction", "Begin", "Worksheet 1", "Worksheet 2", "Worksheet 3", "End", and "Data". (in that order)
What I want to do is run a macro to go to whatever worksheet that is in between "Begin" and "End" and copy, for example, cells $C$1:$D$10; then paste as formula into worksheet "Data" starting from cell C1 and then down a list (i.e., copied cells from "Worksheet 1" get pasted as formula into "Data" cells C1:D10; then copied cells from "Worksheet 2" get pasted as formula into "Data" cells C11:D20, and so on and so forth).
But if I were to add more worksheets (e.g., "Recipe" and "ToDo") positioned in between "Begin" and "End" and run the macro again, it'll either 1) re-copy all the formulas from the included worksheets back into "Data" including the formulas from the newly added/placed worksheets or 2) it'll add the formulas from the newly added/placed worksheets and paste into "Data" at the end of the list.
Can create the macro to run based on the position of worksheet, and not based on the name of worksheet, since ultimately there will probably be over 10 worksheets between "Begin" and "End".
=IF(COUNTIF('Deal Calculations'!E4:E30,"Pandy Mandy"),'Deal Calculations'!B4,"£0")
Above is one of the formulaes that I am using and I tried editing, to no avail.
Anyway here it is, I need to search E4 - E30 for a particular name, lets say Pandy. Now if pandy is found, then a cell on another tab has to equal a cell which is 2 cells on the left. from which the cell which contains the name is located.
here is a psuedo version of it...
Search E4-E30 Find a cell which contains 'Pandy' If pandy is found, 2 cells to the left then a cell on another tab is equal to that.
I have a row of cells with names. Alex, John, Martha, Jim, etc.
Each person has a list of data under them. I have a master column of data. Depending who is on duty today, I want the macro to find the person and then copy paste special the master column over the person column.
Thus, in the macro code where it says
Find(What:="John",
I want it to refer to a specific cell. I.e. what:=$E$4.
Then it must go to the cell it found and copy paste the info in.
I'm working on a code that uses in conjunction with Dave Hawley's Kickbutt VBA. What I want to do is for Excel to find a range in Sheet1 after a cell that contains the word "Master Profiles". For example, cell A10 contains "Master Profiles", cell A12 contains "Apples". I want Excel to start finding from A10 for "Apples" instead of a define used range, since "Master Profiles" is not always on A10. Here is the code that I started working with. But somehow, I can't get it working.
Sub FindCell()
Dim rngFindRange
Dim rngFoundCell
Dim rngFirstFound
Set rngFoundCell = Sheet1.Cells.Find(what:="Master Profiles", LookAt:=xlWhole)
If Not rngFoundCell Is Nothing Then
Set rngFirstFound = rngFoundCell.Rows
'Search 50 rows after the cell contains "Apples"
Sheet2.[A1] = Find_Range("Apple", range("rngFirstRound:rngFirstRound+50"), xlFormulas, xlWhole).Offset(0, 0)
End If
Exit Sub
1.I need to protect certain locked cells from editing and allow certain unlocked cells to be changed on multiple worksheets.
2.When all of the changes are made to the unlocked cells, I need to password protect the entire workbook (except one worksheet) from any changes. (i.e. Prevent even the unlocked cells from being edited)
3.I also need a password to un-protect the workbook and return it to the state described in # 1. above .
I'm looking for a formula in relation to the calculation of time.What I'm looking for is a way of finding the difference between the time two cells and it displaying it in the number of hours e.g.:
Cell 1__Cell 2__Cell 3
12:00 + 18:30 = 6.5 (it is 6 hours 30 mins but I want it displayed as a number.
I am trying to solve problem with finding cells (all searching cells are in 1 column ) witch contains only recurring characters like : 00, aaaaa, 444444444 , etc.
View 3 Replies View RelatedI want to create a conditional formatting formula, which marks products currently in stock.
Lets say that I have the following setup:
provide me a macro to give a particular message or Cell Name when the cell is blank. I have to check around Eight columns and the starting row is A10. Moreover the sheet can have different numbers of row at different time like some time only 50 persons data will be there and some times 60 or 85 like this but the maximum will be 300. So if the 50 persons data is there than it should not warn about row 51 onwards.
View 1 Replies View RelatedI need code in VBA that look for empty cells at a range and return msgbox with the empty cell
View 5 Replies View RelatedI'm working on a macro that's supposed to copy certain cells from a sheet, and paste them in another. But the problem is that I can't find a way to get them all in one go. The sheet that I am copying from has a mile-long list that looks something like this:
OR0220018NO-RING 21,95 x 1,78 N270 BS-0205,00
OR0220018N90O-RING 21,95 x 1,78 N290 BS 02022,00
OR0220018VO-RING 21,95 x 1,78 V275 BS-02010,00
OR0220018V90O-RING 21,95 x 1,78 V290 BS 02013,00
OR0220020NO-RING 22,00 x 2,00 N2709,00
OR0220020VO-RING 22,00 x 2,00 V28024,00
OR0220025NO-RING 22,00 x 2,50 N2705,00
It goes over 3 columns. I want to select column A, B and C in every row that contains the letters "N270".
I have a sheet that returns 4 numbers where 2 will match. Is there a command that will return that matching value?
For example:
cell 1 = 5
cell 2 = 9
cell 3 = 4
cell 4 = 9
something to return the value 9
I am looking to set up an excel doc with 2 sheets.
In sheet 1, I am would like to be able to enter a series of words of interest/criteria to be met (in column D).
In sheet 2, I would like to paste in the text from an individual's CV. The text would be entered en masse, meaning that some cells would be empty and others would have whole sentences/paragraphs of text.
I would like a formula to enter in column A of sheet 1 which would search all of the cells in sheet 2 for the word/words in column D of sheet 1 and return either a positive or negative value.
I had tried the following:
=(COUNTIF(Sheet2!1:1048576,Sheet1!D2)>0)
This formula, however, is not capable of extracting the desired text from a string/sentence, and so only returns a positive result if the desired text is in a cell by itself.
I’d like to return the range (or cells address) that includes text formatted in Bold and Arial font, this is always in Column “B”, so I’m actually behind the rows number....
View 9 Replies View RelatedI've got a very large spreadsheet wherein I need to write a formula for each row to find the first cell with any entry greater than 0 and then add to that cell the contents ONLY 5 cells contiguious to it.
For example data set is this (in .csv format for you)
(column headers)
Name, Jan01, Feb01, March01, April01, May01, June01, July01, Aug01, Sept01, Oct01, Nov01, Dec01, Jan02, Feb02, March02, April02, May02
Jones,0,0,0,0,5,2,7,9,3,10,13,4,8,9,22,7,9
Smith,0,0,3,8,17,23,9,3,16,28,44,7,6,9,10,5,12,19,10
I need formula to find first instance in each row of entry greater than 0 and then add to that the contents of next 5 cells.
Jones would find the 5 and then add the 2,7,9,3,10 to it for formula result of 36
Smith would find the 3 and then add the 8,17,23,9,3 to it for formual result of 63
I have 2 pretty large zip code lists, we will call them columns A and B. I know that I have some from A that match to zips in B, but I have alot more zips in B that don't match to column A. I need to identify all of the zips in B that do not match a zip in column A.
View 9 Replies View RelatedI'm having the following little problem, and i'm hoping that
someone here can help me solve it.
I have a number of rows containing data starting at row 1.
I already made VBA code which finds the last row containing data.
That row number is stored in the variable "LastRowWithData".
What i want to do now is the following.
In column B (in row 1 to the row number stored in "LastRowWithData"),
there are long code's which all have to be checked for unwanted characters.
Some of these unwanted characters are the "I" and "O" characters both in
upper case and lower case.
If these characters are found a messagebox has to appear, saying something
like "Illegal character found in cell ____".
If more than one cell containing unwanted characters are found, either more
messageboxes with the cell coordinates have to be displayed or one messagebox
displaying all the cell coordinates in which the unwanted characters are found.
Im planning to use a while - wend statement to check all cells for unwanted
characters. (While ActiveCell.Row LastRowWithData)
Is there a simple way to do this in (Excel 2003) VBA ?
Is there a way to return not only one cell but two with LARGE?
I'm still working on my top 5 sellers list and trying to generate the list correctly. As of now when I have multiples of the same value I get the same name. Here's what I have now:
Name---Sales
Bob---75
Sue---68
Tim---66
Tim---66
Tim---66
What I'm trying to do is this:
Name---Sales
Bob---75
Sue---68
Tim---66
Jane---66
Dave---66
I'm using this formula (in conditional formatting) to compare a cell with the previous cell (e.g. E11 compares to D11). If it is higher/ lower/the same, E11 is coloured accordingly.
=MATCH(E11,Grades,0)<MATCH(D11,Grades,0)
=MATCH(E11,Grades,0)>MATCH(D11,Grades,0)
=(D11)
However…. sometimes the data is not in D11 but C11 or B11. How do I tell excel to first of all look in D11 and only if the data is not there, to look in C11, then B11?
I am building an inventory simulation and have run into a problem. What i want is, when i change a number in cell H4, i want excel to find the sum of C25 and the cells "H4" up. If H4 is 5 then i need the sum of C20:C25...if H4 is 10 i need C15:C25. Does anyone have any thoughts on how to do this? I have attached a sample sheet to make it more clear.
View 2 Replies View RelatedI have value of 26 in Cell A1, for example and I want to find
whether or not that value falls with a range of cells B1:C2 (which is in another sheet) and if so return the value in D Range.
A1 B C D
26 20 30 100
How would my formula look?
I am writing a formula for finding a maximum out of three average values. The cells that will be populated with data are A1 to A5; B1 to B5; C1 to C5. The final cell where I want to write the formula needs to show the maximum of the three averages (average of data in each row).
The difficulty is that sometimes only the A and B rows are populated (and sometime only A row is populated) and if B and/or C are blank, the formula fails and shows "#DIV/0!".
How can I write so that if C is blank, then evaluate only A and B data. And If both B and C are blank, then just display the average of row A.
At my work we use excel to keep a large number of labels done in one day, those labels are then added up to give our weeks total, running total and average by day.
What i am looking to do though on a seperate sheet though is find out which day we had the most, an example of what it looks like
So this is something that I'm not sure is possible in Excel. I would like to use an "if,then" statement to see if a number is in multiple cells. I know this is usually very simple except there's a catch here. In each cell there's a number range using a "-". So in a single cell a range would be 301-305. I am open to having the range done a different way like 301,302...etc. I just decided this would be an easy way to look at it and was hoping to find a way to solve this problem with leaving in the dash. Whatever is practical is fine with me.
Using Example A in the attached file I want to use this statement, =IF(308 is in any of the ranges in A3:A6, TRUE, FALSE).
So, for me, the alternative I want to avoid is Example B where I would have to list every single number and then check the whole range. I would like to avoid this because these examples, as you can imagine, are on a much smaller scale then what I will actually be dealing with.
What I have is a massive table of data (15k+ entries), which consists of 4 different tables merged together. I have a lot of duplicate entries. However, most of these entries have information in one or another columns that its duplicate does not.
What I need to do is:
Identify the duplicate entries (by part number, which is one of the columns).
Merge the duplicate entries. In the merging process, I need to carry information over, taking data that is currently in 2 or more rows and merging it into one row.
Here's an example:
column1 column2 column3 column4
row1 a . . d
row2 . b
row3 . . c
needs to turn into:
column1 column2 column3 column4
row1 a b c d
If I'm not explaining this well, I will do my best to clarify. My main question is, is there any way to automate this process (even partially)
