Finding All Occurrences Of Person's Name And Calculating Hours Worked
Jan 28, 2014
I'm trying to create a macro that will take name values from a list (Last name, First name) and then find these particular names in a long list of names in another sheet. Once all the occurrences of the name are found, the macro would need to add up all the hours that the person has worked during a given month. For example, I have Jane Doe and John Smith on my shortlist, the macro would have to take the name of the first person, Jane Doe, find all the occurrences of that name in the second sheet that contains names, dates and hours worked, then add up all the hours worked by that person and return the total hours worked value for that parson. Then take the name of the second person, John Smith, and do the same, and so on. Is it possible to do it with macros?
I have been working on a timesheet but the problem I have come across is calculating actual hours worked only in the core hours and any work outside the core hours is calculated in the outside hours column. A standard work day is 7.6 hours working between 8.30am and 5.00pm. However if someone was to commence work either before 6am or after 8pm this is outside of core hours. I have attached an example of my timesheet for you to see what I am talking about.
I can do the timesheet formula for adding the hours worked as follows:
Start Finish Total 08:45 17:15 8.5
However, it doesn't work when I fill in a whole week work of hours in this format:
Start Finish Total 08:45 17:15 08:30
It works on a daily basis, but when total hours exceeds 24, the formula get's all mixed up - how to I format the total column to account for every 5 minutes worked, which you can't do when converting to decimal??
I need to worked out Hours worked in a timesheet. This was the easy part, the hard part is the clause tha HR threw in, which is:
If you have worked and 8 hour day WITH 1 hr lunch then you qualify for overtime. if you work a 8 hr day and work through your lunch (1 hour) (so equivelant to 9 hrs) you still do NOT qualify for overtime there for Overtime = 0.
This is cause some people work though their lunch to get overtime, but legally they have to have a break so we are not paying overtime for it. I have basically tried in a formula to replicate this but it works with some data and not with all. attached is an example, as you'll see the formula works in some cells, but not others.
I need creating a formula that will tell me the total number of employee hours worked during a certain hour (6:00 AM) for a particular department. Some employees clock in at 6:00 AM, some clock in at 6:30. Here is the current formula I'm using which only tells me the amount of employees in the department not how many hours worked . I have three employees that clock in at 6:00AM and one at 6:30AM, the total I'm looking for is 3.5 but my formula gives me the result of 4.
C5:C1446 is a list of departments T1503 is the 6:00 AM D5:D1446 are the Clock In times K5:K1446 are the Clock Out Times
Is there a way to conver a persons time spent (given in weeks) to adjust/convert to show per month. Attached is the sheet. Do note that week 2/25 - 3/1 is a combination of Jan and Feb so hours should be logically divided into jan and feb...
Name 2/18 - 2/22 2/25 - 3/1 3/4 - 3/8 3/11 - 3/15 Feb mar Tom 40 10 0 20 ?? ?? name 2/18-2/22 2/25 - 3/1 3/4 - 3/8 3/11-3/15 Feb Mar
I have attached a worksheet that shows the last and first name of an employee along with their hire date and term date, if termed. What I am looking for is a function that will tell me if a person was active as of 12/31/08 which will read true on the side of their name under active; I also need a function that will tell me if a person worked over 6 months in 2008.
The first person John Doe was hired in 2005 and has a true on the side of his name which meant that he was active as of 12/31/08 but as you can see Jane Doe has true on the side of her hire date and false on the side of her term date and I don't want it to read the first true but the last true of someones name, but Jane Doe qualifies for working over 6 months even though she started in 2007.
Lunch is not paid. Holiday and vacation hours get calculated at the regular pay rate. Overtime is anything in excess of 8 hours per day and/or in excess of 40 hours per week and/or over 5 working days per week. Saturdays for most the employees will be overtime because it will be their 6th workday of the week; but it will be regular time for one employee as it will only be his 5th workday of the week.
For accounting and payroll purposes, we need the totals to display in both hour and decimal format.
So far, I have Lunch, Regular and Overtime hours figured out, but I still need to work with Saturday, Vacation and Holiday hours. Also, currently, the time in and out has to be typed in with the colon and AM or PM. Is there another way to input the info without having to type in those items? I'm trying to make it as user friendly as possible.
I'm attempting to make a simple time sheet for a handful of employees. I'd like to enter the clock in time and clock out time for each day. The end cell should be the running total for the week. The tricky part for me is having the formula subtract an hour for each day that is over 5 hours.
I am trying to write a formula that isn't a gigantic IF statement to calculate whether a person has upgraded their type of house or not within a time period.
The below are the names of the types of housing. I have two of these lists, the first is from the beginning of the time period and the second is from the end of the time period:
Pucca - Normal Kuchha - Strong Pucca - IAY Kuchha - Medium Kuchha - Weak
The best option on this list is Pucca - Normal and the worst is Kuchha - Weak.
A person can start at any option on this list and end on any option. I only want to measure whether their type of house has been upgraded (i.e. from Kuchha - Weak to Kuchha - Medium). I do not need to calculate whether they have stayed the same or been downgraded.
If the person has upgraded I want to display the value of 1. If they have stayed the same or downgraded I do not want to display anything.
An added complication is that if they have upgraded to Pucca - IAY I want to also do not want to show anything.
I'm trying to create a work Rota and I'm having a bit of a problem with a certain section. In Worksheet 1 I have the following headings:
Cell A - Name Cell B - Monday Cell C - Tuesday Cell D - Wednesday etc
Under these headings is each member of staff and the hours they work, IE L (Late), E (Early), SD (Short Day) etc. In the final Column, it counts the number of hours that this person works (Early is 7.5). In Rows 46, there is a section here to work out how many people are working earlys, which is where I have the problem.
The hours are worked out by doing a lookup function on the cell that says E, L etc and goes to a CODES sheet and pulls the value of that letter. What I am wanting to do is lookup that Letter, which and look in the cell next to it and count how many people would be on an early etc.
Timekeeper to tally total hours worked by employee. When doing a pivot for sum total hours worked for FY13 it does not calculate correctly. I understand they formatted that column/custom h:mm but when I change the 8:00 hours to a number I come up with 0.33 .
I am attaching a sample file : sample time.xlsx
I just want them to get a running total of hours worked/pay.
I'm trying to make a way to track if I've worked more or less than the 39 hours/week I'm paid for. At the end of each week, I have a total of how many hours and minutes that I've worked .
On column C I have what I should work.
On column D I have what I did actually work
On column E I'd like to convert automatically Columd D to minutes for calculation purposes
Column F to know if I worked more or less than what I should've subtracting C and E
Column G to have an ongoing tally to know if I need to work more or less
Column H and I could probably be the same thing. Ideally what I'd like is to have a formula pull the information from column G and put it into workdays, hours, and minutes with 1 workday being 7 hours and 48 minutes.
Since I tend to work too much, I'd like to know if I've worked 3 days too much during 1 month, I can take 3 days off the next month to get everything zeroed back to where I don't owe the company anything and vice versa.
I'm trying to calculate the total hours worked for two given periods over a shift , which can span two consecutive days ie. start 15:45 and finish at 00:15 the next day. Hours worked between 6am and 6pm are paid at standard rate, whilst hours worked between 6pm and 6am attract penalty rates. Hours are cacluated in 24hr time
I have attached a copy of the timesheet that we use so you can see exactly what I'm trying to achieve, and included most of the shifts that we have.
I am creating a spreadsheet that will track hours of overtime worked and within the spreadsheet there are several separate departments listed.
I have made it dynamic so that the summary spreadsheet will update as employees are added. I’m using a macro and some complicated helper cells to be able to sort the employees based on their total OT hours worked.
I have this spreadsheet and in it the time is changed from military time to regular and then I use a formula to calculate hours worked. On some of these the total is off by one minute. Does anyone know how to fix this?
I don't know how to paste the spreadsheet so you can see formulas,
I need to develop a work sheet for agency booked people to count the number of hours worked by them on daily basis. Agency can clock in at three different times and clock out at 6 different times. i tried but could not even develop logic to calculate the total earned hours. i attached the sheet for reference.
This is probably a very simple problem that has me going around in circles. I am attempting to set up a time roster, where I simply want to check:
If "end-time" minus "start-time" is greater than 4:00 (hrs), then deduct 00:30 (minutes) and place that result in another cell.
If it is not greater than 4:00 (hrs) then leave unchanged. I have read thru countless examples on the Forum - but I think that such great learning is driving me mad. Although I do believe that I have the correct format [h].mm - but attempts with IF's have got me confused. This is one of those "Looking down the tunnel towards the flickering light" moments.
i m trying to work out the productivity of employees based on how many hours they work (Time in Back Office). How many pieces of work they complete(Back Office items Completed) if 1 piece of work should take 7 mins. the item in red is what i cant seem to figure out.
to calculate how long a ticket is open in our system before being resolved. I don't want to count weekends, and if the ticket is 'suspended', I don't want to count that either. There is also the factor that the ticket 'un-suspend' date may be later than the ticket 'closed' date. Which is the bit that's throwing me.
So, I have the following fields
Ticket Open, Ticket Closed, Ticket Suspended Date, Ticket Unsuspended Date
A sample ticket might be (using above fields)
02/11/09 09/11/09 04/11/09 30/11/09
That 'should' equal two days (16 hours) as the Unsuspend date falls after the close date so it was suspended from the 4th until closure.
Now I want to know, in hours (8 hour day) how long that ticket took to resolve (i.e close), remembering you can't count the time it was suspended, or any time that fell over a weekend. Also not all tickets are suspended.