I have a list of 30 numbers representing receipts due. I have one receipt which I know must represent the sum of some of these numbers. Is there anyway in Excel that I can highlight the range of 30 numbers and ask Excel to sample all possible combinations to find which numbers add up to my total receipt?
View 9 Replieshow do I find the non zero minimum in a column of figures, I want the figure that is greater than 1 returned?
View 7 Replies View RelatedI need to transfer "total" figures from Pivots to a table.
In the Pivot take I can filter by country, buy/sell, front/back.
At the moment I am selecting the combination I want and manully keying in the total. Is there an auto way of doing this?
Things were so simple with Subtotal, where it allow me to add anything that has US on it, but what I want to total US, FRONT, BUY?
I do a lot of work in excel to do with accounts and this often needs checking against sage. When the invoices/petty cash sheets are put into sage the total amount is put in, but in my spreadsheets I need to split the reciepts. So I was wondering if there was a formula/VBA code, that if I only knew the total of the invoice would find which cells added up to this total?
View 4 Replies View RelatedI have this formula below which works for finding the Volume Total in range C7:E7...it displays the volume for that date in G7
Code:
=SUMIF(INDIRECT("'"&E$6&"'!B7:B10000"),$G$7,OFFSET(INDIRECT("'"&E$6&"'!B7:B10000")
,,MATCH($E10,INDIRECT("'"&E$6&"'!$C$7:$E$7"),0),,))
but when I use the formula for finding the PLanned Stops - Time in the range G7:H7 it gives the Volume Total from Column D...I want the Planned Stops -Time from H7.....
Code:
=SUMIF(INDIRECT("'"&E6&"'!B7:B10000"),G7,OFFSET(INDIRECT("'"&E6&"'!B7:B10000")
,,MATCH(E13,INDIRECT("'"&E6&"'!G7:H7"),0),,))
In column A I have a list of 5 Auditors labelled Q1 - Q5, 5 Coolum’s across in column F I enter in their scores as a % e.g. 80%. ...So Q1 - 50%, Q2 - 60%. In column A37-A41 I have Q1-Q5 listed, in Column B37-B41 I need to calculate the average deviation per Auditor eg. If Q1 has 2 entries of 50% and 75% return average value in cell A37 which should be 62.50%. I am trying to calculate the average for each Auditor. find attached example.
View 2 Replies View RelatedBasically, I'm doing a recorded macro for work where I take an export and manipulate the data to show differences between sales from last year and this year. Also comparing this months projected sales to avg of last 6 months and also against last years this month.
The problem I'm running into is in automating the this month sales for mid-month exports. I can do it individually but I can't find a formula that will do it. Data is in one cell per month, so ex. 130 sales this month so far. I need to have it convert that to projected sales for total month based on what day it currently is.
I have a report which has a list of customers, each customer has 24 columns which represent the payment history over 24 months. If a payment has been made for that month the date and time (formatted correctly) will be populated in this cell.
Each customer has a product name attached to it so a product can appear several times. I need is a formula that shows the total payments recieved for a particular month for a particular product. For example.
I have managed to create the following flag which works a treat, it picks up a date an account was set up but looks at 1 column.
This may not be the best way to do this, but I don't know Macros or Pivot Tables.
I am looking for a way with formulas to do the following:
Within a workbook the 1st sheet is the data entry.
In another sheet that will total data from the data sheet is where I want to be able to total columns of data, depending on what is entered in one specific column:
Example:
Data Sheet, E2:E2999 is a unit number selcted by pull down tab entry.
G2:G2999 in the same sheet is where the data is.
Q: What formula would allow to total the data on the Total Sheet depending on what unit number is selected in column E on the Data Sheet and the data amount in column D from Data Sheet?
I need to set up an easy to use spread sheet for my office. It needs to be able to calculate the running total spent of fuel, as well as include any discounts we get and then calculate our total savings.So basically, total spent and total saved.
View 3 Replies View RelatedI'm sure this can be done but I don't think I have the formula correct. What I am trying to do is add each day's total while displaying a positive number if the total exceeds 6000.
View 5 Replies View Relatednumber for item detail level from category standpoint. For example, in the category sheet has total number per category and per month and in the item detail sheet has a list of item number with category. I want a formula to recognize which item belongs to which category then use the total number of category by month to multiply with % of total in column D from Item Detail Spreadsheet.
View 2 Replies View RelatedI am trying to create a very basic workbook that has 2 worksheets. one is a daily input for tonnes, that then just gets cut and pasted to a different program, and the other worksheet is the running total. i.e., it adds up every time you update it.
been trying to figure out a macro so when you press the update button it then just updates the monthly total.
Colac Production.xls
I need to indicate if the figures for this week has gone up or down compared to last weeks figures.
So looking at the attached, I need to add a column (I5) to sheet Admitted Patients WE 20081005, so it compares the % treated in <18 wks figure by specialty to previous weeks figures on sheet Admitted Patients WE 20080921.
Ideally I would love an arrow either point up if the figures has increased or down if they have reduced.
I need to produce three different formats of accounts data monthly. I attached a file with each accounts description in Columns A, E and G. Is there a way to match the data with those accounts name in a faster way than manual linking?
I would like the last 6 figure in cell a1 to be highlighted cut and pasted into B1 - the amount to be cut will vary
View 4 Replies View RelatedI am trying to make an inventory cover page - that shows data of separate products on different sheets with the following;
Product
Date
Previous Total
Amount Taken
New Total
and occasionally there is a Re-issue of stock to the previous total.
This is at the moment an historical record as anyone can see the usage across the dates for any particular product by looking at the sheet. Each time there is a change to the inventory it is recorded on a new row. But what I am trying to do is to copy the last row of data from each sheet to the cover page to show an overall inventory.
The part where I get stuck is making the selection of the last entered row of data [from each sheet] automatically updating the coverpage, when each sheet will get new data added frequently.
I thought about somehow making a duplicate of the last row and locking it in place and linking that to the coverpage - but I still do not have a clue on how to get it to automatically select the last row of the data.
Dim figure from the cell b4,b5,c4,c5 to accumulate add total b11,b12,c11,c12, respectively.
View 5 Replies View RelatedHow to make space between the figures ex:11480831525 i want like: 11480 831525
because i want to do it for thousand of transactions in one time by using only one formula.
I have the following ...
.Offset(3, 0).Value = "For " & P & " numbers there are " & Format(tly, "###,###,##0") & " x different values of " & cmb & " numbers. "
... which includes figures upto and including millions.
The thing is that the above code ONLY produces figures that are relevent.
I want to calculate the sum of a column but I have 4 lots of figures going down the column and I only want it to calculate the some of 2 of those 4.
The 4 figures: £4.80, £3.80, 31 & 25.
These 4 figures are within the column multiple times and I just want to have one cell that sums up the £3.80's and £4.80's within the column and then another cell to do a separate sum of the 25's and 31's.
Is this possible, if so how? Does it require an IF SUM formula of some sort?
I have a large number that has 6 figures.I want to display this number to 3 significant figures on the spreadsheet, but I have more formulas that need to use the unrounded number.So is there a way to DISPLAY the number to 3 sig figs whilst keeping it as the complicated number for the rest of the formulas?
View 6 Replies View Relatedhow can I total three columns together, one with the value of #N/A, and two with figures in, without the total coming back as #N/A ?
View 10 Replies View RelatedI'm wanting to Rank a set of figures in one column but use criteria in another column to pick up the array which is used. I don't want any figures to be ignored so will have multiple rank 1's 2's etc. Would also be handy if I could use multiple criteria.
View 9 Replies View RelatedI am using a Hlookup to retrieve Words and Figures but when retrieve words it is failed and output is figures ONLY while I need the same word to be shown in the cell value?
View 2 Replies View RelatedDATE
PRODUCT
BALANCE
1/2
KEY CHAIN
4
1/2
KEY CHAIN
8
1/2
KEY CHAIN
27
[code]....
How to get final figure each product from sample data above:
the result:
Key chain = 27
Gift = 4
Hamper = 1
I have 2 spreadsheets, one is on crew costs and the other one is a summary page. On "crew cost" worksheet, say A1= IBM, B1 =Microsoft, C1=HP and D1=Pioneer. I want to link A1 to D1 to cells A1 to D4 on "summary page".
However, I do not want to use "paste special", "transpose" function as I may need to add in columns to "crew cost" spreadsheet.
Instead I hope that I could link A1 on "crew cost" spreadsheet to A1 on "summary page" spreadsheet. Then I hope to drag the formula from A1 down to D4. The result will be A1= IBM, B2 =Microsoft, C3=HP and D4=Pioneer on "summary page" spreadsheet.
However, it does not work as dragging only occurs through columns or through rows. Is there any formula that I can use?
I am working with percentages, and trying to avoid #DIV/0! Errors at the same time.
Lets assume column A holds last years figures, and column B holds this years figures, column C calculates the difference in percentages.
I am having dificulty where say A1 = 0 B1 = 10 (C1 Should be 100%)
then what happens if A2 = 5 and B2 = 0 (C2 Should be - 100%)
Is there a common formula that will account for all possible + or - figures in A and/or B that will also suppress #DIV/0! Errors?
I have an excel database with about 5 columns and 150 rows whose cell data I want to display to 2 significant figures. Almost all the data is numeric, but there are one or two cells with text in them, and the numeric data varies between 1 and 4 significant figures at the moment, some >1, some
View 9 Replies View RelatedIm trying to find a way to script a button to delete entire rows from a selection that contains rows which total 0. It seems like an easy task but ive drawn a blank.
View 5 Replies View Related