How To Paste Figures From Column To Row

May 7, 2007

I have 2 spreadsheets, one is on crew costs and the other one is a summary page. On "crew cost" worksheet, say A1= IBM, B1 =Microsoft, C1=HP and D1=Pioneer. I want to link A1 to D1 to cells A1 to D4 on "summary page".

However, I do not want to use "paste special", "transpose" function as I may need to add in columns to "crew cost" spreadsheet.

Instead I hope that I could link A1 on "crew cost" spreadsheet to A1 on "summary page" spreadsheet. Then I hope to drag the formula from A1 down to D4. The result will be A1= IBM, B2 =Microsoft, C3=HP and D4=Pioneer on "summary page" spreadsheet.

However, it does not work as dragging only occurs through columns or through rows. Is there any formula that I can use?

View 9 Replies


ADVERTISEMENT

Cut And Paste Last 6 Figures?

Jul 1, 2013

I would like the last 6 figure in cell a1 to be highlighted cut and pasted into B1 - the amount to be cut will vary

View 4 Replies View Related

SUM Formula For Certain Figures In A Column?

Jul 28, 2014

I want to calculate the sum of a column but I have 4 lots of figures going down the column and I only want it to calculate the some of 2 of those 4.

The 4 figures: £4.80, £3.80, 31 & 25.

These 4 figures are within the column multiple times and I just want to have one cell that sums up the £3.80's and £4.80's within the column and then another cell to do a separate sum of the 25's and 31's.

Is this possible, if so how? Does it require an IF SUM formula of some sort?

View 5 Replies View Related

Finding Non-Zero Minimum In Column Of Figures

May 21, 2013

how do I find the non zero minimum in a column of figures, I want the figure that is greater than 1 returned?

View 7 Replies View Related

Round Up The Sum Of A Column Figures To The Next Nearest Quarter

Apr 2, 2009

I need to round up the sum of a column figures to the next nearest quarter. For example: $1.11 would be rounded to $1.25, or say $1.83 would be rounded to $2.00. What formula would I need to do this? I'm using Excel 2000

View 2 Replies View Related

SUMIF Formula - Drag Out Figures From Column In Tab Of Workbook

Jun 17, 2014

In the attached workbook, see the "P & L" tab, cells I30 to I48. The idea of the formula I have placed into these cells is to drag out the figures from column I in the "Trial Balance" tab of the workbook. A similar formula is used succesfully in the "balance sheet" tab in Column B. I don't understand why the formula doesn't work in the cells i've specified in in the " P & L" tab it seems to work for I8 and the rows immediately below it "revenue".

UK Trial Balance May 2014 V2.xlsx‎

View 5 Replies View Related

One Column In Spreadsheet Doesn't Save Entered Figures All The Time

Apr 16, 2014

I have a spreadsheet for payroll. The last column is for net pay. I enter this by hand when I get it back from the payroll tech. There are no formulas in this column. When done entering these figures, I click on "save". Then I close the file. From past experience with this sprdsht, I have found that it doesn't always save this column. It saves all the other info. I have entered in the sprdsht, but not this column. So, I have to re-enter everything in this column and "save" again. Close the sheet, then re-open it to be sure it got saved. Why won't it save this column of info. the first time?

View 4 Replies View Related

Copy / Paste Every Sheet Single (P Column) And Paste To Notepad

Sep 6, 2012

copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.

View 1 Replies View Related

Pull Column Data (Sheet3) From Master.xls And Paste To Column 4, Sheet4 Of WorkingSS.xls

Feb 16, 2008

Pull Column Data (Sheet3) from Master.xls and past to Column 4, Sheet4 of WorkingSS.xls

I'm assuming this would be done with VBA or a really exotic macro.

The Funky Part would be that the WorkingSS.xls file column data is being copied/pasted too (WorkingSS1.xls or WorkingSS2.xls ect) the file may be different every time so I would need an insert in macro or VBA to "Choose File Please..." then continue.

The Master.xls workbook has spreadsheet lets say "Sheet1" in which I need all the data in Column A (except the header or cell A:1) copied TO WorkingSS1.xls on Sheet4, Column B, but Column B already has about 6000 rows of info, so I need it copied to the very end of (A:6001 although it will be different everytime) or the first empty cell at the bottom of that column.

next another Column from Master.xls workbook lets say "Sheet1" again in which I need all the data in lets say "Column B" copied to the WorkingSS1.xls on Sheet4, Column F. Caveat this time is that the data needs to copied to the same row as the first copy/past. So it would be pasted into F:6001. Double caveat is that the Column F contains no other data except for what we are about to paste in.

I have several more steps of automation to be done here but this is the beginning and a big hump I need to get past. The rest I think I can do.

View 9 Replies View Related

Macro - Select Last Non Empty Column And Paste Information In Another Column?

Mar 25, 2013

I am trying to find a macro that look for last non empty cell in column A and them paste a formula/comment in all cells of column B.

View 3 Replies View Related

Cut And Paste Single Column Data In Different Column According To Year

Dec 5, 2012

I have a file which is divided into 2011, 2012, 2013 and 2014 years in column A. I want these data in different column according to year. For example, Column E(2011), Column F(2012), Column G(2013) and Column H(2014).

Attaching sample a file with sample data to be converted.

It is also to be in consideration that data in column B and C should not be repeated and all year data should come in front of it.

I want this by coding or formula only. I dont want to use pivot table for this.

Expecting Result.jpg

View 7 Replies View Related

Copy From One Column And Paste To Another Column By (alt + Enter) Function

Nov 22, 2008

i attach the testing2.xls attachment here. from the sheet 1 "original", how to copy from 1 column, column"B" and then paste to column "A" by clicking function "alt + enter" at the same row but different row in the same cell. Output result can refer to the sheet 2 "output".

View 4 Replies View Related

Macro To Find End Of Column And Paste Contents In Column 1

Mar 11, 2009

I have the file here i work with, basically the first column is a legend and the column to the right of it is a pointer column to help me find out where a legend is located in another file. So i was wondering if a macro could be made to basically find where the "legend column" A, C, E ect ends ( every other column is a legend column , one next to it is a pointer column ). and then combine the ends all of the columns contents and put them into 1 column.

In the file with this question i have showed you what i start off with, i highlighed in yellow where each column legend ends, ( normally these are not highlighted and i find them manually ). In the 2nd tab i show what the end result should be. All the columns are now consolidated into 1 column. 1 after the other.

View 4 Replies View Related

Condition Paste Formula In Column N Based On Column A

Sep 7, 2009

I am wanting to paste formula from N1 till N X (X = varaiable row) where X reliant on Column A Row X. If Column A Row X has character "=====" it should paste N1 Formula all the way down till N Row X which is equal to A Row X containing "=====" .

I might be sounding complicated over here but it is a simple equation.. I have tried to approach this in the capacity i could by condition if Column A row x is blank delete the row.

View 2 Replies View Related

VBA To Copy Non-blank Cells From Column And Paste Into Another Column

Oct 4, 2013

In sheet "diary" I have data in certain rows in column A8:C10000 that contains values if a certain condition is met. I need a vba to copy and past only non blank cells in column D8:F10000. I first wrote a formula with index but it takes too long to caculate.

View 9 Replies View Related

Copy From Column Some Cells And Paste It In Another Column

Apr 16, 2013

Code:
Range("a" & Cells.Rows.Count).End(xlUp).Select
Range(Selection, "a1").Select
For Each cell In Selection
If Not IsEmpty(cell.Value) Then
If cell.Value "2012*" Then
cell.Copy
cell.Offset(0, 5).PasteSpecial
End If
End If
Next cell

I have a to copy from column A some cells ( e.g "000005PR RODI T.R, S.L.") and paste it in column F. The problem is that in column A i have as well empty cells and cells that have date (e.g "2012 02 14-OCT-2011 CN 100725") . Neither the IF/AND nor the "double" if constructs are working .

View 3 Replies View Related

VBA Code To Paste From Last Column With Data In It To Next Column

Oct 8, 2013

The data exists in a spreadsheet that has Data from Column B2:CQ18, but it needs to be dynamic and update anytime someone clicks the button (the button is fine and works with all the other Macros)

Here is the code I have so far.

Code:
Dim LastCol As Range
Dim NextColPaste As Range
With Worksheets("Run Hours")
Set LastCol = Range("M3:M18").End(xlToRight)
Set NextColPaste = LastCol.Offset(, 1)
LastCol.Select
End With

That Code will Select the data in row 3 only and not the whole range of 3:18

I have tried Range (LastColData & "3:18").Select and that selects everything on the whole page from row 18 down.

I have done a lot of searching and for some reason this dynamic selection and pasting of data is escaping me this morning

View 1 Replies View Related

Copy Cell From Column And Paste It To Next Column And Up One Row?

Nov 15, 2013

I want to copy a cell from a column and paste it to next column and up one row. My current data looks like this:

DATA
1234

I want to make it look like: DATA 1234

View 5 Replies View Related

How To Show If The Figures Have Gone Up Or Down

Oct 9, 2008

I need to indicate if the figures for this week has gone up or down compared to last weeks figures.

So looking at the attached, I need to add a column (I5) to sheet Admitted Patients WE 20081005, so it compares the % treated in <18 wks figure by specialty to previous weeks figures on sheet Admitted Patients WE 20080921.

Ideally I would love an arrow either point up if the figures has increased or down if they have reduced.

View 8 Replies View Related

Matching The Figures

Feb 10, 2010

I need to produce three different formats of accounts data monthly. I attached a file with each accounts description in Columns A, E and G. Is there a way to match the data with those accounts name in a faster way than manual linking?

View 13 Replies View Related

Duplicating The Last Row Of Figures?

Jul 15, 2009

I am trying to make an inventory cover page - that shows data of separate products on different sheets with the following;

Product
Date
Previous Total
Amount Taken
New Total
and occasionally there is a Re-issue of stock to the previous total.

This is at the moment an historical record as anyone can see the usage across the dates for any particular product by looking at the sheet. Each time there is a change to the inventory it is recorded on a new row. But what I am trying to do is to copy the last row of data from each sheet to the cover page to show an overall inventory.

The part where I get stuck is making the selection of the last entered row of data [from each sheet] automatically updating the coverpage, when each sheet will get new data added frequently.

I thought about somehow making a duplicate of the last row and locking it in place and linking that to the coverpage - but I still do not have a clue on how to get it to automatically select the last row of the data.

View 7 Replies View Related

Dim Figures From Cell

Nov 26, 2012

Dim figure from the cell b4,b5,c4,c5 to accumulate add total b11,b12,c11,c12, respectively.

View 5 Replies View Related

How To Add Space Between The Figures

Jul 28, 2013

How to make space between the figures ex:11480831525 i want like: 11480 831525

because i want to do it for thousand of transactions in one time by using only one formula.

View 1 Replies View Related

Alignment Of Figures

Sep 17, 2007

I have the following ...

.Offset(3, 0).Value = "For " & P & " numbers there are " & Format(tly, "###,###,##0") & " x different values of " & cmb & " numbers. "
... which includes figures upto and including millions.

The thing is that the above code ONLY produces figures that are relevent.

View 9 Replies View Related

Rounding To Significant Figures?

Mar 31, 2014

I have a large number that has 6 figures.I want to display this number to 3 significant figures on the spreadsheet, but I have more formulas that need to use the unrounded number.So is there a way to DISPLAY the number to 3 sig figs whilst keeping it as the complicated number for the rest of the formulas?

View 6 Replies View Related

Summing Figures Which Include #N/A

Feb 3, 2010

how can I total three columns together, one with the value of #N/A, and two with figures in, without the total coming back as #N/A ?

View 10 Replies View Related

RANKING Set Of Figures Using Criteria

Jul 11, 2012

I'm wanting to Rank a set of figures in one column but use criteria in another column to pick up the array which is used. I don't want any figures to be ignored so will have multiple rank 1's 2's etc. Would also be handy if I could use multiple criteria.

View 9 Replies View Related

HLookup For Words Not Figures

Jul 15, 2012

I am using a Hlookup to retrieve Words and Figures but when retrieve words it is failed and output is figures ONLY while I need the same word to be shown in the cell value?

View 2 Replies View Related

How To Get Final Figures From Raw Data

Feb 13, 2014

DATE
PRODUCT
BALANCE

1/2
KEY CHAIN
4

1/2
KEY CHAIN
8

1/2
KEY CHAIN
27

[code]....

How to get final figure each product from sample data above:

the result:

Key chain = 27
Gift = 4
Hamper = 1

View 7 Replies View Related

Formula Account For All Possible + Or - Figures

Nov 23, 2007

I am working with percentages, and trying to avoid #DIV/0! Errors at the same time.
Lets assume column A holds last years figures, and column B holds this years figures, column C calculates the difference in percentages.

I am having dificulty where say A1 = 0 B1 = 10 (C1 Should be 100%)
then what happens if A2 = 5 and B2 = 0 (C2 Should be - 100%)

Is there a common formula that will account for all possible + or - figures in A and/or B that will also suppress #DIV/0! Errors?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved