I am using the code below to copy data from a sheet that updates externally to copy to a database. For some reason it has quit finding the next empty row to paste data. It is currently over writing the data to row 61. any help advice or suggestions will be greatly appreciated, I am an armature if there is a better way please let me know.
I have in my Workbook_open a macro,called Workbook_SheetActivate with a line : Msgbox ActiveSheet.Name ....
In a sheet I have a macro SortWorksheets ....
My problem is , when I run the macro SortWorksheets it always stopped by each worksheet until the macro is ended, this because the macro by opening workbook.
How can I make the macro SortWorksheet in one run?
I can put the Data in F21, but then I need to skip a cell and put the next Data in H21 and so on, the cells are in yellow that I need to string out the data in. so every time I open the form the data skips a cell.
I am using the following code to find an emtyRow, but I actually need to find an emptyRow and test all the cells of the rows from A thru O to insure that there is nothing in any of the next emptyRow. How would I change the code?
VB: Private Sub SubmitButton_Click() Dim emptyrow As Long
I have to copy and paste some datas under anothers but I don't know the code to do so; I mean, the code to paste on the first empty cell under the previously used cell.
I need to append this macro to find the next empty column to place the data in. The orignal VBA works fine, but I need to go into the editor, and repalce the offset number every time I add a new row (weekly).
I want to use VBA to find the first empty cell in a colum. But I want VBA to start look for this empty cell after cell B10 and not from the top of the colum. I also want that the VBA stop looking after cell B20. The last part I already have (see below) but I don't know how to have VBA to start the search in cell B10 and not in the top.
I am trying to write a macro that looks for the first empty cell in column G, Then once that cell if found, assigns that row to be the row that other data is copied and pasted to. My code currently just finds the first empty cell in each column and copies and pastes the data and am not sure how to get it to what i need it to do.
Code: Sub seconddatatransfer() Dim wb1 As Workbook, wb2 As Workbook, sh1 As Worksheet, sh2 As Worksheet Set wb1 = Workbooks("filestransfer.xlsm") 'Edit file extension Set wb2 = Workbooks("KBCG.xlsm") 'Edit file extension Set sh1 = wb1.ActiveSheet Set sh2 = wb2.Sheets("Tracking Sheet") sh2.Cells(Rows.Count, 2).End(xlUp)(2).Value = sh1.Range("B6").Value 'left
I was wondering whether someone knows a formula that would be equivalent to WEEKNUM (excel 2003) since I will not be able to install the Analysis Toolpack because of IT validation issues?
I have a userform that has Label 1, textbox1 and textbox2 at the top. (I shall call it HEADER)
Then, arranged in a row i have combobox1, textbox4, textbox6, textbox7 and label7 (I shall call LINE1)
On a row beneath this i have combobox2, textbox12, textbox14, textbox15 and label 10 (I shall call LINE2)
I need a way of finding the first empty row on sheet 1 (easy bit) and then putting the info from the HEADER and LINE1 in the first empty row, then HEADER and LINE2 in the next empty row etc etc. There are 5 rows in total
Sheet1 contain daily input table which as follows: Name salaryBonusXX10002XY9001YY11002ZY15003ZZ12502AA10502AZ9501
Sheet2 have table where all the information is saved. So we can say this is database of sheet1. Which store every day information of sheet 1.
SALARY DATABASEMonth Name Salary Bonus
Problem:
I want that when I finished writing on the sheet 1(which i do manually) then with macro it go the sheet 2 and find first empty cell in the name column and past the all the data of sheet1 table. Months I will put manually. I am working on MS2003.
I have made a series of of udf's and used them without a problem in my worksheet. One of the variables used by udf's, " commission " is a named range on the "vrs" sheet in my book. All was working fine, all the udfs updated whenever i changed the value of "commission" by directly entering a new value in the cell referenced by "commission" I then wrote sub to call an input box wich collected a value for commission and put it in the ranged cell. Since then, of the 4 columns of data that commission acts on only 3 now update automatically. The recalcitrant 4th column will only update if I select the cell, place the cursor anywhere in the formula and press enter.
I have a list of 500 values calculating when a plane will stop on a carrier deck, i have IF formulas for each row saying whether the plane has stopped or is slowing. At some point the plane stops then this column reads "stopped". However i would like to see when this point is without having to scroll down 400 rows to find where this column changes, basically i want this:
=IF(L8="Stopped",D8,IF(L9="Stopped",D9,IF(..... 500 times over, however this wont fit in the box!.
What i need is a cell that says when the force stopping the plane is greater/equal to the total energy of the plane, the plane has stopped.
I am working on trying to make a macro I wrote run faster, and I understand that one way to do this is to stop certain actions from occurring. However, I am having a hard time understanding what stops what, specifically among these:
I recently got a new laptop. I now have excel 2007 and vista. The debug step key, F8, does not work. It toggles out of excel when pushed. If I start the procedure in the debug menu, the SHIFT - F8 will step through though. Is there a setting I am missing? It must have somehting to do with VISTA since in the debug section it says to use F8.
I have been working on a workbook, and all of a sudden, my keyboard no longer worked in Excel. No shortcuts, no CTRL+C, no CTRL+V, no CTRL+S, no CTRL+A, no F12 to save, no letters, no numbers.... The only button that is working is my ALT key, and I use the other letter keys just fine to navigate after pressing ALT.... But that's it!
I have still been able to work on it because I can still write in Word, and I can still write more code in the Visual Basic window, and I can still click the buttons I create under the Developer... but it's still frustrating to not be able to type a thing in any of the cells, formula bar, or be able to use any of the shortcuts. And now when I tried to close it, I can still select everything else, and I can close this workbook, but it won't close Excel.
Yesterday I needed to install some new software that required at the end reinstalling of Microsoft Redistributable 2005. Not sure if for that reason but now the last line (the SendKeys) is not sending the email automatically anymore. What happens is: -the email message windows pops up but is not being sent unless i do it manually (if i get rid of the two seconds pause ahead of that) -have a VB error message that takes me before the SendKeys line (if I keep the two secs wait ahead of that)
It looks to me that either: -the pc is not active anymore on the email message therefore the SendKeys doesnt work -somehow the instruction finds the "door" shut by something else -worse of all, the software has messed up with those send keys commands (tried to reinstall it but to no avail)
All my macros have suddenly started crashing Excel 2007 when I try to run any one of them. I can record a new macro but even that newly recorded macro will crash Excel.
Service Pack 1 was downloaded and installed by Windows Update two days ago and I had successfully run macros after SP1 was installed.
Today, it's a no go and I'm at a loss as to what may have caused this problem. I have not installed any software lately, other than the Windows updates on patch Tuesday.
This is on a Vista Home Premium machine.
When I try to run a macro, Excel crashes with this info:
What could make this line of code stop working. It has worked for weeks, and just yesterday it stopped working. :x
ActiveWorkbook.Sheets("Email").UsedRange.AutoFilter Field:=2 The sheet is unprotected, and events are enabled. I don't know of anything different than before. What do I look for that would not allow this code to run?
I made a spread sheet last year that used various COUNTIF formulas that referenced other cells. =COUNTIF(I40:ER40,"A") It worked perfect.
I copied that spreadsheet to use for this year. I cannot get this formula to work. I have reentered in various locations and forms, but to no avail. If I enter the data and then enter the formula, it works.
However, if I enter the formula first and then enter the data (which I will do over the course of the year) it does not work. I even tried to reconstruct all of this in a brand new spread sheet and it still is not working, although last year's spread sheet still works.
I've got a spread sheet at work that is shared between 4 people. It's password protected and its been protected so only four of us can edit it. It was working fine until yesterday for no reason the auto filter stopped working. The drop down arrows are still there but nothing happens when you click on them?
The sheet was made on excel 2003 but one of the users uses the newer excel which we will all eventually get.
This vlookup has been in this workbook for years. All of a sudden any of the cells that have formulas won't work without placing the cursor after the formula in the bar and hitting enter.
