This macro
ActiveSheet.Range("A65536").End(x1up).Offset(1,0).Select
when run locates the next empty cell in Column A perfectly. But.... how can I get this to work from a button located at the top of the spreadsheet?
I am only a copy and paste man where macros are concerned!
I need to append this macro to find the next empty column to place the data in. The orignal VBA works fine, but I need to go into the editor, and repalce the offset number every time I add a new row (weekly).
Here's the orignal coding:
I have to copy and paste some datas under anothers but I don't know the code to do so; I mean, the code to paste on the first empty cell under the previously used cell.
View 12 Replies View RelatedI want to use VBA to find the first empty cell in a colum. But I want VBA to start look for this empty cell after cell B10 and not from the top of the colum. I also want that the VBA stop looking after cell B20. The last part I already have (see below) but I don't know how to have VBA to start the search in cell B10 and not in the top.
Range("B20").End(xlUp).Offset(1#).Value = Range("C1").Value
I am trying to write a macro that looks for the first empty cell in column G, Then once that cell if found, assigns that row to be the row that other data is copied and pasted to. My code currently just finds the first empty cell in each column and copies and pastes the data and am not sure how to get it to what i need it to do.
Code:
Sub seconddatatransfer()
Dim wb1 As Workbook, wb2 As Workbook, sh1 As Worksheet, sh2 As Worksheet
Set wb1 = Workbooks("filestransfer.xlsm") 'Edit file extension
Set wb2 = Workbooks("KBCG.xlsm") 'Edit file extension
Set sh1 = wb1.ActiveSheet
Set sh2 = wb2.Sheets("Tracking Sheet")
sh2.Cells(Rows.Count, 2).End(xlUp)(2).Value = sh1.Range("B6").Value 'left
[code]....
I was wondering whether someone knows a formula that would be equivalent to WEEKNUM (excel 2003) since I will not be able to install the Analysis Toolpack because of IT validation issues?
View 4 Replies View RelatedI have two work sheets where I have data.
Sheet1 contain daily input table which as follows:
Name salaryBonusXX10002XY9001YY11002ZY15003ZZ12502AA10502AZ9501
Sheet2 have table where all the information is saved. So we can say this is database of sheet1. Which store every day information of sheet 1.
SALARY DATABASEMonth Name Salary Bonus
Problem:
I want that when I finished writing on the sheet 1(which i do manually) then with macro it go the sheet 2 and find first empty cell in the name column and past the all the data of sheet1 table. Months I will put manually. I am working on MS2003.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I can put the Data in F21, but then I need to skip a cell and put the next Data in H21 and so on, the cells are in yellow that I need to string out the data in. so every time I open the form the data skips a cell.
View 6 Replies View RelatedFormula for this? If a cell in column T is empty, use column U (but make it negative)??
View 2 Replies View RelatedI am using the following code to find an emtyRow, but I actually need to find an emptyRow and test all the cells of the rows from A thru O to insure that there is nothing in any of the next emptyRow. How would I change the code?
VB:
Private Sub SubmitButton_Click()
Dim emptyrow As Long
'Make sheet1 active
Sheets(1).Activate
[Code] ......
I need code in VBA that look for empty cells at a range and return msgbox with the empty cell
View 5 Replies View RelatedI am using the code below to copy data from a sheet that updates externally to copy to a database. For some reason it has quit finding the next empty row to paste data. It is currently over writing the data to row 61. any help advice or suggestions will be greatly appreciated, I am an armature if there is a better way please let me know.
'Copy SUSD data to datbase
Sheets("Summary - SUSD").Select
Range("SUSD_DATA").Select
Selection.Copy
Sheets("SUSD Database").Select
Range("b6" & LastRow + 1).Select
Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats, Operation:= _
xlNone, SkipBlanks:=False, Transpose:=False
' Sort Data..............
I want to have several buttons, that put a certain value in the first empty cell in a specified column in antoher Woorksheet.
View 9 Replies View RelatedI have a userform that has Label 1, textbox1 and textbox2 at the top. (I shall call it HEADER)
Then, arranged in a row i have combobox1, textbox4, textbox6, textbox7 and label7 (I shall call LINE1)
On a row beneath this i have combobox2, textbox12, textbox14, textbox15 and label 10 (I shall call LINE2)
I need a way of finding the first empty row on sheet 1 (easy bit) and then putting the info from the HEADER and LINE1 in the first empty row, then HEADER and LINE2 in the next empty row etc etc. There are 5 rows in total
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View RelatedI putting together a spreadsheet that applies Payments (as they come in) against the oldest open invoice. As payments come in, old invoices are closed out. An aging is done and late fees are applied.
I have made a macro that inputs all of the information of the invoice in a list. However, when a payment comes in, I am trying to write a macro that:
1) in column G - Finds the first non-zero balance
2) Applies the payment amount to that open invoice. If there is additional funds left over after the satisfaction of that invoice, I would like the payment to be applied to the next open invoice until all the funds of the payment have been drained.
I am having so much trouble trying to even just locate the first nonzero balance and select it.
I have the following code. Is there any way to select a range once the last cell with data is found. I would like to be able to select whatever cell in column A is selected with the code below through E2.
View 4 Replies View RelatedHow would I do a vba for finding a blank cell in column D, and when a blank cell is found, delete and shift up cells D through N on the same line?
View 2 Replies View RelatedI'm looping through and finding a cell based on Column A, and I .resize(,5).select and from that selection I want to create a range called "LCrng"
I want to find the largest cell in a column so I can use “auto fit selection” without cutting off type.
View 9 Replies View RelatedI have written several pieces of VBA code which produce a sequence of tables on a single worksheet (with the rather original title "Tables"). The code often adds tables to the end of the current set of tables, and to do this, I need to know where the next available space is.
I have a solution which I have been using for ages now, which checks each cell in an appropriate column until a sequence of 3 blank cells has been found as I can guarentee that the tables are at most 2 cells apart. It then sets i=i-3 to give me the location of the first empty cell.
Blankcount = 0
i = 3
While Blankcount < 3
If Cells(i, 3) = "" Then
Blankcount = Blankcount + 1
Else
Blankcount = 0
End If
i = i + 1
Wend
i = i - 3
I want to hide the row when value "x" is entered in column C
I tried this code in the sheet, but nothing happens.......
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Column = 3 Then
ThisRow = Target.Row
If Not Target.Value = "" Then
ThisRow.EntireRow.Hidden = True
End If
End If
End Sub
So when a "x" is entered in cell (115,C), row 115 must be hidden. When a "x" is entered in cell((9,C) row 9 must be hidden to, and so on. When a cell in an other column is changed, the macro does not need to start.
I would like to select the next empty cell in columb A after running this macro, what code do I need to add to this to enable that.
View 2 Replies View RelatedI need the code to paste my selection in worksheet SORT, into the first available cell in column A. Intention is not to overwrite existing values in column A.
'
Sheets("tis").Select
Range("AC2").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Sheets("SORT").Select
'I need the code to paste my selection in the first available empty cell in column A, so I don't overwrite any existing values in column A
End Sub
I need a macro which will manipulate my data like this:
If a blank cell is found in column C, then I'd like to have the contents of that row in column D shifted to the right.
I have a column of data that I need to add sum total whenever there is a break in data. The row will vary on a daily basic so a set autosum will not work if I am summing 4 numbers today and 5 tomorrow.
This is what I have: the header titled Sizing is in cell C1 and the remaining data is below that, where I show a space below that is where I have an empty cell.
Column C
1
SIZING
2
320
[Code] ......
What I need is code to sum where there is a blank cell.
Column C
1
SIZING
2
320
[Code] ...........
How do I code in VBA - I need to select the next empty cell down in a column - ie blank field so that I can transfer the next set of data
I need a macro to do something very easy. I have blocks of data in an excel worksheet separated by one column. The First block begins in column B and ends in col G. Next block begins in column H and ends in L.
I'd like to copy the value from the first cell in the start of each block (b1) and paste it in the left column seperating each block (left empty column - a1) all the way down to where the data in that block ends (b60), and do this for the next column. So in the above exmaple it would populate column A (range a1:a60) with the value from cell B1.
The number of columns is the same but the number of rows vary. The value to be copied is always in the first row and first colunm of where a data block begins - so in the case above - b1, h1 etc.
I am running this macro or some variation of it, depending on the column I need the time entered into:
Sub MacroD()
Dim LR As Long
LR = Range("D" & Rows.Count).End(xlUp).Row
ActiveSheet.Unprotect
Range("D18:D" & LR).Value = Now
ActiveCell.Offset(1, 0).Select
UserForm1.ListBox1.Text = "Time"
UserForm1.ListBox1.SetFocus
' UserForm1.Show
End Sub
When I need to run the same macro again (say I've run Macro D once, and now I need to run it again to get the next time), the forumla overrides the previous timestamp. I need the macro to find the next empty cell in column D and enter the timestamp there.
Sheet1 *ABCDEFGHIJKLMN15Major EventMajor Event Clock TimePUSH#########SPREAD########OUT FWD########REV########OUT REV########Delay########1617Start10:55:09*10:55:27 *10:56:24 *10:56:26 *10:56:19 *10:56:28 ####10:55:59 18W-U10:55:180.40010:56:23 0.01710:56:24 0.03310:56:26 0.01710:56:27 0.01710:56:28 0.03310:56:30 19MTT10:55:26######*0.000*0.000*0.000*0.000*0.000*20**0.000*0.000*0.000*0.000*0.000*0.000*21****0.000*0.000*0.000*0.000*0.000*> Excel Jeanie HTML 4