I am using the following code to find an emtyRow, but I actually need to find an emptyRow and test all the cells of the rows from A thru O to insure that there is nothing in any of the next emptyRow. How would I change the code?
VB:
Private Sub SubmitButton_Click()
Dim emptyrow As Long
'Make sheet1 active
Sheets(1).Activate
[Code] ......
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx
Sheet1.doc
Sheet2.doc
I can put the Data in F21, but then I need to skip a cell and put the next Data in H21 and so on, the cells are in yellow that I need to string out the data in. so every time I open the form the data skips a cell.
View 6 Replies View RelatedI have to copy and paste some datas under anothers but I don't know the code to do so; I mean, the code to paste on the first empty cell under the previously used cell.
View 12 Replies View RelatedI need to append this macro to find the next empty column to place the data in. The orignal VBA works fine, but I need to go into the editor, and repalce the offset number every time I add a new row (weekly).
Here's the orignal coding:
I want to use VBA to find the first empty cell in a colum. But I want VBA to start look for this empty cell after cell B10 and not from the top of the colum. I also want that the VBA stop looking after cell B20. The last part I already have (see below) but I don't know how to have VBA to start the search in cell B10 and not in the top.
Range("B20").End(xlUp).Offset(1#).Value = Range("C1").Value
I need code in VBA that look for empty cells at a range and return msgbox with the empty cell
View 5 Replies View RelatedThis macro
ActiveSheet.Range("A65536").End(x1up).Offset(1,0).Select
when run locates the next empty cell in Column A perfectly. But.... how can I get this to work from a button located at the top of the spreadsheet?
I am only a copy and paste man where macros are concerned!
I am trying to write a macro that looks for the first empty cell in column G, Then once that cell if found, assigns that row to be the row that other data is copied and pasted to. My code currently just finds the first empty cell in each column and copies and pastes the data and am not sure how to get it to what i need it to do.
Code:
Sub seconddatatransfer()
Dim wb1 As Workbook, wb2 As Workbook, sh1 As Worksheet, sh2 As Worksheet
Set wb1 = Workbooks("filestransfer.xlsm") 'Edit file extension
Set wb2 = Workbooks("KBCG.xlsm") 'Edit file extension
Set sh1 = wb1.ActiveSheet
Set sh2 = wb2.Sheets("Tracking Sheet")
sh2.Cells(Rows.Count, 2).End(xlUp)(2).Value = sh1.Range("B6").Value 'left
[code]....
I am using the code below to copy data from a sheet that updates externally to copy to a database. For some reason it has quit finding the next empty row to paste data. It is currently over writing the data to row 61. any help advice or suggestions will be greatly appreciated, I am an armature if there is a better way please let me know.
'Copy SUSD data to datbase
Sheets("Summary - SUSD").Select
Range("SUSD_DATA").Select
Selection.Copy
Sheets("SUSD Database").Select
Range("b6" & LastRow + 1).Select
Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats, Operation:= _
xlNone, SkipBlanks:=False, Transpose:=False
' Sort Data..............
I was wondering whether someone knows a formula that would be equivalent to WEEKNUM (excel 2003) since I will not be able to install the Analysis Toolpack because of IT validation issues?
View 4 Replies View RelatedI have a userform that has Label 1, textbox1 and textbox2 at the top. (I shall call it HEADER)
Then, arranged in a row i have combobox1, textbox4, textbox6, textbox7 and label7 (I shall call LINE1)
On a row beneath this i have combobox2, textbox12, textbox14, textbox15 and label 10 (I shall call LINE2)
I need a way of finding the first empty row on sheet 1 (easy bit) and then putting the info from the HEADER and LINE1 in the first empty row, then HEADER and LINE2 in the next empty row etc etc. There are 5 rows in total
I have two work sheets where I have data.
Sheet1 contain daily input table which as follows:
Name salaryBonusXX10002XY9001YY11002ZY15003ZZ12502AA10502AZ9501
Sheet2 have table where all the information is saved. So we can say this is database of sheet1. Which store every day information of sheet 1.
SALARY DATABASEMonth Name Salary Bonus
Problem:
I want that when I finished writing on the sheet 1(which i do manually) then with macro it go the sheet 2 and find first empty cell in the name column and past the all the data of sheet1 table. Months I will put manually. I am working on MS2003.
It is about finding the number of unique items in a range that contains empty cells.I can intuit the form of this:
Formula:
[Code]....
And many of the variations of it when there are no empty cells in the range.
For a range of that contains empty cells I've tried this:
Formula: [Code] .....
And variations of it. It does not work, and I don't know why...............however..........
I ran across this on another [SOLVED] thread and it does work:
Formula: [Code] .....
I would have never considered this plausible. What is the magic behind appending an empty string to the criteria in the COUNTIF function?
It strikes me that this strategy likely has application elsewhere, too.
maxvalue = Application.WorksheetFunction.Max(Range("D:D", "A:A", "G:G"))
This gives me 'Compile Error:Wrong number of argruments or invalid property assignment'.
If a number in cell M1 is also anywhere in column A (column A has unique numbers), then cell W1 (date) should equal the content of cell V (also date) in the row that that number appears in column A. If M1 is blank (or there is no match in column A), then W1 should equal V1.
In W1, I currently have...
I'm trying to condense my email lists in order to stop people receiving the same email having signed up to several lists. How do I compare 5 different columns to find email addresses which appear in more than one...
View 1 Replies View RelatedI need to find the which two columns that give the greatest combination.
Row 2 shows some possible combinations, a total of combinations is 21.
Attached File : test.151515.xlsx
This should be an easy one, it has slipped my mind.
I have columns A and B, I want to find any names that appear in both column A and column B. I want them to show in a certain color.
I currently have two tabs. Tab A (Error Report) spit out a bunch of records that I need to find in the raw data/remove them. The value in column C in Tab A refers to Column A in Tab B (Data), and Column D in Tab A matches with Column N in Tab B, and Column E in tab A refers to Column C in tab B.
I want to know how I can find the records that match those 3 columns in the First Error Report Tab as I need to find those records and delete them as they are, as you can see, errors!
How I can know the numbers of rows and columns in a excel sheet?
View 5 Replies View RelatedGiven that a worksheet has frozen rows and/or columns, how do you programmatically determine what they are?
There are plenty of examples around that tell you how to create frozen rows/columns by setting ActiveWindow.FreezePanes = True but, given this is only a Boolean value, reading it does not tell me where the freeze is.
I have a spreadsheet with two columns:
The first one will always have a 'W' or a 'E'.
The second one will have a three digit code. Like this:
W 507
W 507
W 507
E 504
E 504
W 505
W 505
W 504
W 504
Is it possible to have output that show how many of each combination there is? Like this(for the example above):
W 504 2
W 505 2
W 507 3
E 504 2
Hi I have a process in which I have to create a selection without bias. There are 9 categories in this selection process. The 1st and 2nd category already have code and they work differently from the rest. For the 3rd through the 8th categories I have to choose one from the 3rd category, then one from the 4th, etc. After the 8th category I start back at the 3rd and go to the 4th, ect. It ends when cell A1 reaches 30%.
Its a little difficult to explain but the process is simple enough to understand once you see it. I have attached an example of the process. I have also started the code and left explanations within the code.
Could someone please help as I need to get the totals and whether its negative or positive balance.
To be more specific in a workbook in sheet1 I have Client data columns A,B & C in A,B,& C should be match with the companys data in the next sheet.
If this both sheets sheet1 & sheet2 and columns A,B,& C is matched then in column D in both the sheets should be Matched and Column E should be 0 in both the sheets.
And,The problem starts when both the sheets are not matched if the Column A,B,C is not matched in Column D it should show as "NOT Matched " and difference in Column E in both the sheets.It may be positive figure in one sheet and Negative figure in another sheet.
Please advise If any Forumulae which can help me to sort this out or should I need to go for an Macro.
Please find an sample sheet is attahced.
I have a column with text + string (e.g., T1000, T1001, etc.)
I have another column that's the same, but sometimes this column has new codes.
Right now I have to "eye" it side by side to see if there are any new codes, but I'm sure there's a better way to do it. I'm thinking of asking Excel to compare the columns and if they aren't equal, then it would be necessary for me to eye it. If they are equal, then I dont have to bother because there are no new codes.
A
B
C
D
E
[Code]...
In the example above I am trying to look up a value from columns C-E. I need to be able to search/index using 2 criteria to figure out which row to match with the given column. for example: If I want to know the invoice qty. for R&D for Jan-2012, so the returned value would be 13. I have tried several different combinations of match and index to get this to work but have had no success. Ultimately what I want to do is have a drop down for the month and year that our VP can select and it will give him the given values for that month.
I have 2 pretty large zip code lists, we will call them columns A and B. I know that I have some from A that match to zips in B, but I have alot more zips in B that don't match to column A. I need to identify all of the zips in B that do not match a zip in column A.
View 9 Replies View RelatedI have a little problem - as you probably guessed.
I have a spreadsheet in which i need to find the value of the last used cell in a row.
e.g spread sheet uses columns "a" to "l" and rows "1" to "75".
Over time rows are filled in with text ("tom" "dick" "harry") from a to b to c, the most recent being to the right but the rows can move at different paces.
I want to count how many many times each value has come up most recently.
