Finding The First Nonzero In A Row And Then Deleting All Prior Cells
Oct 14, 2009
I'm trying to create a macro that will look in each row and find the first nonzero that it contains, and then proceed to delete all prior cells before it and shift the existing cells in that row to the left. Now I know that the formula to find a non-zero in a row is:
=(MATCH(TRUE,INDEX(B9:BE9>0,0),0)-1)
and I figured that to select all cells before it you would simply use:
Range(Selection, Selection.End(xlToLeft)).Select
Selection.Delete Shift:=xlToLeft
My problemms are:
I can't figure out how to translate that formula into a piece of the macro and also instead of having it simply calculate how many zeros there are until the first nonzero to get it to select that first nonzero
How to make the selection conditional upon the row. At first I thought maybe I could just have it paste the formula into the first cell of the row but I realized that it wasn't possible to do as the formula already has the row selected
How to have it select all the prior cells to the first nonzero, delete them and shift existing cells to the left without deleting the first nonzero.
View 9 Replies
ADVERTISEMENT
Aug 15, 2007
I am being supplied with a date (but not weekday) in a report. How do I find the date of the prior Saturday without having the weekday supplied?
View 4 Replies
View Related
Jun 15, 2014
I have a set of data:
Code Cost
A 10
B 0
C 0
D 15
E 13
How can I extract the nonzero data in the following shape:
A 10
D 15
E 13
View 6 Replies
View Related
Nov 15, 2009
range C7:AJ7 should look for a 1 in C5:AJ5 and start placing a 4 till 8 cells after the 1.
Range C6:AJ6 will be a little bit more complicated it should place a 2 in each cell, starting from 10 cells prior the 3th last number in range C5:AJ5.
View 9 Replies
View Related
Feb 10, 2009
I'm looking to do a search and delete in Excel 2007 and I'm having a great deal of difficulty trying to do this. I've attempted to modify some code I found on the internet and not having very good luck with it. Here is the scenario, I've got a spreadsheet with 5 columns (A to E). In column C, there is a product name with certain identifiers that set it apart. An example of this product name with identifier is "product XXX_type 2_attribute ". I want to search for "type 2" in Column C of each row and then delete the row.
Here is what I have written so far and I'm not having any luck.
Sub RowDel()
Dim cell As Range
For Each cell In Range(Range("c4"), _
Range("c65536").End(xlUp))
If cell = "_GPnl_" Then
Range(cell, _
Cells(Rows.Count, 1)).EntireRow.Delete
Exit For
End If
Next cell
End Sub
View 9 Replies
View Related
Jan 27, 2014
Any way of finding particular data from a data set and deleting the data from that field without using conditional formatting or remove duplicates?
I have used a vlookup to find the words that I needed I now need to find where the are located in my original data set and delete these so I am left with data that if I perform a vlookup on it will not bring back any words as they will have been deleted.
View 4 Replies
View Related
Aug 5, 2007
I deal with leads for a sales room and get sent over leads in bulk, I've created a master scrub list that I can attach to the end of a new lead file and sort by number to show which are duplicates.
When you do the: Data, Filter, Advanced Filter, select Unique Records, it hides the duplicate but what I need is not only for the duplicate to be hidden or gone but the row that it is a duplicate of, i.e. I need BOTH rows to go
Name-----number
Dave 555-1212
Dave 555-1212
John 536-2343
Smith 423-2312
needs to become
Name-----number
John 536-2343
Smith 423-2312
I would need a formula that figured out that Dave with number 555-1212 was a duplicate and delete BOTH rows,
View 10 Replies
View Related
Jul 31, 2013
I was wondering if there is a formula or command to find and delet specific rows. I want to remove people from an excel email list.
On Sheet 1, I have 500 rows with columns for first name, last name, and email.
On Sheet 2, I have 30 rows with columns for first name, last name, and email that appear on Sheet 1 but need to be removed.
Is there a way to do this without manually searching for each email and then deleting the row?
View 4 Replies
View Related
Jun 6, 2007
I have a large keyword phrase list.
In a sheet called "AllKWs".
What I would like to be able to do is find all Country and town names in that list and delete the names only in the phrase, not the whole row.
Several points though.
Can the macro (As I will assign a text button to it).
Only find and delete these words if they are either at the start or end of a phrase?
4 example phrases; ....
View 9 Replies
View Related
Jan 13, 2007
I want to delete a row in a spreadsheet by finding the row that contains a particular value. I use MATCH on spreadsheet #1 to identify the row number on spreadsheet #2 to delete. I need the macro to select the row number on spreadsheet #2 and delete it.
I don't know the syntax for the commands in VBA to write this and I'm coming to this forum for help because I'm too lazy to learn VBA. I've recorded macros to add rows, populate cells, hide sheets, etc. The following code is extracted from a macro I recorded to try to get started, and was hoping to be able to substitue a reference to sheet1 within the parentheses at
Rows("4:4").Select
but I can't make this work. The following is the code I was trying to adapt.
Sheets("Sheet2").Select
Rows("4:4").Select
Selection.Delete Shift:=xlUp
End Sub
View 4 Replies
View Related
Apr 2, 2014
I have a excel file with more then 10 sheets..Some of the sheets contains this word in some random cells" #DIV/0! " I want a macro which can find it in every sheet except parent sheet and can remove it.
View 5 Replies
View Related
Jun 17, 2014
I have a macro that when you run it, it creates a new tab with the next month on it. I.e. I'm in January 2014 and I hit the button it creates a tab for February 2014....
In a different workbook, I want to have it copy this newly created tab name into cell A1 of what we'll call Hidden_Tab.
So I want to have Hidden_tab A1 say January 2014, then I press the button to run the macro and it then copies the new tab name from the tab I just created: February 2014 and pastes it in Hidden_tab A1 and so on...
View 6 Replies
View Related
Nov 2, 2009
Could it be possible to "sequentially offset" a vlaue, say, of A1 such that, for instance, when A1 changes from "5" to "6" (via formula, not direct input), A1=6 and, say, B1=5, and so on? You know, like keeping a value record of A1, one step back, in B1.
This would be UNBELIEVABLY valuble to me. Thus, would I be in eternal debt to he/she who would resolve this here.
View 9 Replies
View Related
Aug 15, 2007
The loop cycles through my sheet correctly but wont delete any cells.
View 10 Replies
View Related
Jun 18, 2014
I am mailing a letter on the 15th day and the 45th day after a hire date. The effective date will be the 1st of the month following 60 days. A meeting will be held every 3rd Thursday of the month for all new hires. What I am trying to accomplish is calculating the 3rd Thursday of the month PRIOR to the 1st of every month.
i.e. hire date is 3/11/14 - 1st letter goes out 3/26/14 (15 days) - 2nd letter goes out 4/25/14 (45 days).
Their eligibility date is 6/1/14 (1st of the month following 60 days).
The meeting is held on 5/15/14 (3rd Thursday of the month prior to the first of the month (June))...
HIRE DATE LIST.xls
View 1 Replies
View Related
Apr 6, 2009
I have a need to simply rename a workbook without saving. I have a master template named "IR QT" but, within the workbook, I run a macro that saves the file with content from a cell as the filename. After the 'Save' macro is executed, the sheet stays open, as planned, but obviously the file has been renamed. What I would like to happen at the end of the 'Save' macro is for the sheet to be renamed (not re-saved) to "IR QT". I just need the VBA code to put at the end of the 'Save' macro to do the rename back to "IR QT".
View 3 Replies
View Related
Apr 25, 2008
I have a macro that selects various cells whilst it runs - nothing unusual there! What I'd like it to do is return to the activecell immediately prior to running the macro. So if cell 'B34' is active and then the Macro runs it currently returns to cell 'A12' (the last selection in the macro).
I would like it to return to cell, in this instance, 'B34'. The activecell could of course be any reference within the spreadsheet, so whatever is active prior to running macro is returned to when macro is complete.
View 9 Replies
View Related
Jul 23, 2008
My Financial year runs from Oct to Sept. My current month is June 2008 and the YTD Expenses is in Cell P2032. I have set up a formula to calculate the prior YTD Expenses as sum(AU2032:AM2032) This is for the period Oct 2006 to June 2007. When I do July 2008, I would like to the formula to caculuate the prior YTD Exp as sum(AU2032:AN2032)
How can I get the formula to Change Automatically based on the Month & Year as per the example shown above?
View 9 Replies
View Related
May 16, 2009
I have checked the following reference whithin Excel VBA's references Manually:
Microsoft Visual Basic for Applications Extensibility 5.3
BUT when I run the following Macro, once checked the prior reference:
Sub AddModuleToProject()
On Error Resume Next
Debug.Print Err ' I GET 0
Dim VBProj As VBIDE.VBProject: Set VBProj = ActiveWorkbook.VBProject
Debug.Print Err ' I GET 1004
Dim VBComp As VBIDE.VBComponent: Set VBComp = VBProj.VBComponents.Add(vbext_ct_StdModule)
Debug.Print Err ' I GET 91
VBComp.Name = "NewModule"
Debug.Print Err ' I GET 91
End Sub
View 9 Replies
View Related
Nov 23, 2009
Is there a way to do this?
For example:
I have a price value that will change constantly stored in the column/row "I45". I want to store that intial price in a cell "A67".
View 9 Replies
View Related
Jun 12, 2008
what formula should I use to refer to the last working day on the prioir month. I have trie to look up forums but no result os yet.
View 4 Replies
View Related
Apr 30, 2014
I have a data in which I have inserted a table with headers.
I then filter the type of data I want removed from the table using the drop down
Then goto special, visible cells only, press delete.
Now, the data is gone, but when I select all again to pull up the entire table, the data is gone, but rows are still there. So now I have tons of empty rows in between the rows of needed data. Any way of removing the rows in between as well as the data?
View 4 Replies
View Related
Jul 7, 2014
I need to store some numbers, all of which are prefixed by four or five zeros. When I format the cells as number, the zeros are erased. So, 0000012345 becomes 12345. The zeros are preserved when I store them as text, but I cannot do the functions that I need to do with the cells formatted as text.
How I can preserve the zeros in number format?
View 2 Replies
View Related
Feb 3, 2009
When you highlight a group of cells and give them a reference name- that name seems to be permanent. How do you delete one or add cells to the reference? Example attached book1.xls Cells A1-B3 are named "TheGroup".
View 2 Replies
View Related
Mar 29, 2009
I have a column with "1" and "0". I'd like to have something like, if the value in a cell within the column is "0", then delete the 4 cells previous to the cell that contained "0" within the row.
Instead of deleting, the values can also be replaced with anything e.g., zero or n/a etc.
View 4 Replies
View Related
Apr 14, 2009
The delete function has disappeared from my EDIT menu in excel. Delete and Insert has also disappeared when I right Click on the spreadsheet.
View 11 Replies
View Related
Dec 13, 2006
i have worksheet with peoples details in it... i have a userform with a combobox and a delete command button in it with the persons name in the combobox... and i cannot figure out how to delete the persons details with the combo box...
View 9 Replies
View Related
Sep 22, 2007
Is there a way to delete empty cells, without having to do each one individually. I have 10,000 numbers with about 500 empty cells. I did a search, but found nothing...
View 9 Replies
View Related
Sep 1, 2008
I am trying to a method to delete rows that contain EL or LE in a specific cell in a set column as this will reduce my file down by nearly a third. Currently by doing it using a autofilter it kills my computer as there is so much data. Is there an easy way to reduce this?
Trade ID456465ELColumn B456456LE Column B8454321LEColumn B456456ELColumn B5464564LColumn B4564546LEColumn B
View 9 Replies
View Related
Jun 12, 2009
I need to have my macro select a certain range of cells with a specific product code and delete them. What would be the code for it (product code 107). Here is what i have so far:
Workbooks.Open Filename:=fNameAndPath, UpdateLinks:=1
ActiveWorkbook.Save
ActiveWorkbook.SaveAs Filename:=myStrPath1 & myStrPath2 & myFile3 & myExt, FileFormat:=xlNormal, CreateBackup:=False
Windows(myFile3).Activate
Cells.Select.Range ("A78:K153")
Selection.Delete
Cells.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
Range("A1").Select
ActiveWorkbook.Save
ActiveWorkbook.SaveAs Filename:=myStrPath1 & myStrPath4 & myFile4 & myExt2, FileFormat:=xlCSV, CreateBackup:=False
View 9 Replies
View Related
