I have a set of data:
Code Cost
A 10
B 0
C 0
D 15
E 13
How can I extract the nonzero data in the following shape:
A 10
D 15
E 13
I'm trying to create a macro that will look in each row and find the first nonzero that it contains, and then proceed to delete all prior cells before it and shift the existing cells in that row to the left. Now I know that the formula to find a non-zero in a row is:
=(MATCH(TRUE,INDEX(B9:BE9>0,0),0)-1)
and I figured that to select all cells before it you would simply use:
Range(Selection, Selection.End(xlToLeft)).Select
Selection.Delete Shift:=xlToLeft
My problemms are:
I can't figure out how to translate that formula into a piece of the macro and also instead of having it simply calculate how many zeros there are until the first nonzero to get it to select that first nonzero
How to make the selection conditional upon the row. At first I thought maybe I could just have it paste the formula into the first cell of the row but I realized that it wasn't possible to do as the formula already has the row selected
How to have it select all the prior cells to the first nonzero, delete them and shift existing cells to the left without deleting the first nonzero.
I am looking for VBA code to extract data from each tab into master tab based on data.
I have 3 tabs (inputs)
Tab1 (Dept A-NAME) (RANGE B4:I7)
SL NO
ID
Date
Customer
Start Time
End Time
Trucks
Supervisor
1
A
2/25/2014
Customer 1
10
1
3
ABC
[Code] .....
Tab 2 (Dept B-NAME) (RANGE B4:I11)
SL NO
ID
Date
Customer
Start Time
End Time
Trucks
Supervisor
1
B
2/25/2014
Customer 3
10
1
3
RTY
[Code] .......
Tab 3 (Dept C-NAME) (RANGE B4:I7)
Is it possible to run vba code to get below result in new tab
SL NO
ID
Date
Customer
Start Time
End Time
Trucks
Supervisor
Result
1
A
2/25/2014
Customer 1
10
1
3
ABC
Dept A
[Code] ......
Condition here is date 2/25/2014, is possible when running code message box pops up to ask date, when we give conditional date it extracts those dates.
Excel -2007 & Windows 7
So I have this problem in excel with comparing 2 columns.
Basically, I have 2 columns(a &B) that I need to compare with one another and find out the matching data. I am trying to use that matching data to enter in our reports.
Both columns might have duplicate items because I am dealing with premium numbers.
Formula to compare these 2 columns and find the matching data and extract it to a separate column. Keep in mind, i am dealing with almost 20,000 lines of data.
I am trying to extract unique Data from the information in the output data in the file attached after i have extracted data based on criteria from the database sheet. i have noticed that because i extract data from the database sheet and from there i perform the extraction of the of the unique data , it is not able to extract unique isser name form the output sheet.
View 1 Replies View RelatedI have a workbook that has ben imported into excel and I need to extract the Cabinet sizes (red text) from ColumnC On Sheet2 leaving out the rest of the info. I have a button on the home sheet that has the code that I am running to generate this report it will do most of what I want but I am stuck at extracting the cabinet sizes.
The data is coming from the SheetComponetListing worksheet and going to Sheet2. I have manually created the end result that I am looking for on the CabinetSize worksheet. [URL]....
I have a table: A1: K28879
I need only certain rows to be extracted and placed on same worksheet or a seperate one BUT
The rows to be extracted are under a heading above it which that says 9 number and Count eg: 123456789 Count. (Count is alwatys there the number vary however its always in column A)
EG:
45621234 Count
data data etc..... (i need this row)
...another row
...another row
..etc
456345678 Count
data data etc.. (this one)
more data... (not this row)
etc..
The first row under that heading needs to be extracted only.. some under that heading might have 1-15 rows it varies...
I have 4 columns of numbers. How to randomly extract a certain set numbers from each column. Then display the results from smallest to largest. I provided a sample worksheet..
View 3 Replies View RelatedI'm running a small messenger company and I've got a geographic area divided into five zones: 1,2,3E,3W,& 4
Deliveries within 1 zone will be charged for one zone.
Deliveries from Zone 1 to Zone 2 will be charged for 2 zones. Etc.
I've got a list of zones in my From column and also in my To column.
I need to write a formula that will give my customers the Zones Charged in a seperate cell.
I learned how to do something like this back in school, but don't even know what to call it anymore. Maybe it's some kind of comples IF function.
FREE Deliveries to anyone in Long Beach, CA to the winner!!!
how to extract all members of group of data (column) - for example data is (2,4,2,5,6,6,2,6,5,5,2) and to get as result only members of group (2,4,5,6)?
View 6 Replies View RelatedI have a string (as below - Call them A1:A4) which I would like to seperate into 4 columns (Call them B1:E4).
I have successfully seperated the first part using MID (It's always 5 digits) but the second part has a varing length which then impacts on the third and fourth parts of the string.... Any ideas?
87261 WIMBLEDON 10:08 10:10
87169 NEWMALDEN PASS 10:13
87171 SURBITON PASS 10:15
87177 HMPTNCTJN PASS 10:16
To add to this I am using the POCKET PC version of Excel which does not have all functions so at the moment I am limited to which functions I can use (Can you add functions to the PPC?).
I want to extract data from Serrial number 2 columnwhich are not match to Serrial number 1 column and past into in third column
View 5 Replies View RelatedI have 2 columns. One is the years and one is the the associated data.
I need the associated data(BP values) to be sorted in years like shown in excel sheet attached.
I have data in ms excel and in column "F" is the Qty
If the Qty is Less then 40 then extract the data and put into the sheet "Less then 40"
I have attached sample excel file : Extr.xls‎
I would like to create a macro so that it will pull all the data from the worksheet "Data" and put it onto worksheet "Extracted Data". However I only require the rows which have Booking Office No SU17.
View 3 Replies View RelatedI have some code that is importing data from a text file that contains ~35,000 line items and is ~50 columns wide (this part of the code is working fine).
Once the file has been imported, I need to copy certain line items to a sheet called “output”. The code would be something like this if reading line by line:
If the value in row x, column 5 (it is always in the 5th column) in “AccountList” then
copy entire row and to next empty row in sheet(“output”)
The “AccountList” is separate sheet with a list of account numbers in column A with ~250 items.
I am not sure if the code to extract this data should occur while I am importing the data or if I should do it after and run through the data again.
I have a report that is downloaded off a company database and creates a report that is attached.
Is there a way to create a macro to extract some data that I need and leave the rest:
I need to keep and everything in the assigned column
PB ID (A3), Issue (B3), Group Code (J3), Group Name (K3), Sub group id (L3), Sub Group Name (M3),Subject ID (L3), Subject Group Name (M3), Subject ID (N3), Subject (O3), PB Status (P3), CPM Report Name (T3), CPM Profile Name (U3), Profile State (V3).
The worksheet's name changes so I can't reference the worksheet. Attached is a copy of what I get when downloaded.
I have an excel work sheet with 2 columns and hundreds of rows. The first column is time in minutes over a number a years and the second is a list of corresponding data readings (numbers). I want to only select on the hour data from the list however I cannot seem to do it. The times vary in the sense that they are not all just 1 minute apart, some are every minute, then there might be a 10 minute gap in data, a few more minutes, then another gap etc.. All I want to be able to do is to select all the on the hour data from the list and its corresponding data value.
View 6 Replies View RelatedI built an estimating spreadsheet for the electrical construction industry and am trying put together a "Materials List" on another worksheet. I want the materials list to display materials which have a value greater than zero.
Example, the 1st worksheet is my estimating worksheet which contains a list of 30 materials. The 2nd worksheet is a "Bill of Materials" that I would like to display in a proposal format to the customer. I only want to show them materials that have a quanitity of more than zero from the estimating worksheet.
how to use COUNTIF to count up the number of times something appears. What I want to do is add up values if an H is present in the cell with the value eg. if 3 cells contained:
H, 3.5
7.5
H, 3
...then 6.5 would be returned.
I have a sheet of data where I need to extract data from between 2 dates, if the result of the 2 dates are
View 1 Replies View RelatedIn column M I have data that lists a number, then number of metres between brackets. For instance
Column M
11 (79m)
1 (5m)
22 (123m)
Basically what I want to do is to always return the number of metres without m, so the data between "(" and "m".
I tried to do this using the find and mid formulas, but I either haven't got it quite right. I'm only after a spreadsheet solution (not VBA).
I am trying to extract the ounces (OZ) data from a string: example, BOX 15OZ 1819106287, CONTAINER 12.3OZ 1818176234. I need everything from OZ prior until there is a space.
I.e.
15OZ
12.3OZ
I have a file which contains one field showing all of the changes to our data. It shows the Field Name followed by a colon: then the Before value followed by a line | then the After value. If multiple fields changed then they are separated by a semicolon;.
I am interest in extracting the Before and After values for changes to the MP.COST field only. Here are examples of the data:
A1 = "MP.COST :4.00|3.50;MP.FLAG :Y|N;"
A2 = "MP.COST :4.25|4.12500;"
A3 = "MP.CODE :125064|200009;MP.COST :4.79|4.66000;"
For A1 I want to pull back 4.00 and 3.50
For A2 I want to pull back 4.25 and 4.12500
For A3 I want to pull back 4.79 and 4.66000
These are all of the Before and After values associated to MP.COST.
Kow I can accomplish this either through an excel formula or piece of code?
Example: Milburn Corp- -Invalid date range
Desired outcome: Milburn Corp
Lets say Milburn is in cell A1. I used the following formula which did not work. I kept getting a Value error message
=a1,find("- -",a1,1)-1)
I have data for the distances of cars journeys. I'm looking to extract the 1st journey distance for each date for each car. The car registration number is in column A.
This is an example:
Sheet1  ABCDEF1Reg number Date distance  1st Journey distance
210D1449904/01/20119.271Â Â 9.271310D1449904/01/201110.016Â Â 1.876410D1449905/01/20119.292Â Â Â
510D1449905/01/20119.629Â Â Â 610D1449906/01/20119.327Â Â Â 710D1449906/01/20113.185Â Â Â
810D1449906/01/201110.163Â Â Â 910D1555506/01/20111.876Â Â Â 1010D1555612/01/20119.534Â Â Â
1110D1555712/01/20111.48Â Â Â 1210D1555812/01/20115.628Â Â Â 1310D1555912/01/20115.356
I have a long list beginning either with 4 numbers or 4 numbers followed by parentheses and a single number between them. I have this formula to extract the data between parentheses:
Code:
=MID(A7,FIND("(",A7)+1,SUM(FIND({"(",")"},A7)*{-1,1})-1)
What can I do to eliminate a "#VALUE!" result for cells that do not contain parentheses?
I got a data consists of Invoice number (Cell A2), Invoice date (Cell B2), customer name (Cell c2), Invoice Amount (Cell D2). The data range is about A2 to D 128 have records of 3 months with several customer names. I need every customers details as individual. For example any where i am typing one particular customer name means it should bring that particular customer's entire details alone. Simply as the following table i need the details of particular customer details alone.
7670
25.09.13
23000
7677
25.10.13
45000
7680
2.11.13
50000
7690
25.11.13
15000
if I had cells that contained values:X220 Lecture 1 [800]
X220 Lecture 2 [75.0] Is there a way to copy the value within each cell between the [ ] and paste that into another cell? As an example:
A
B
Lecture 1 [75.0]
75.0
Lecture 2 [100.0]
100.0
extracting data from a table.
team 01
team 02
team 03
[Code]....
I want to know what are the teams in which sam a member. Peoples' names should be selected from a dropdown menu and names of the teams should be displayed below the menu.