Finding The Last Filled Cell In A Column
Jul 15, 2006
I have written several pieces of VBA code which produce a sequence of tables on a single worksheet (with the rather original title "Tables"). The code often adds tables to the end of the current set of tables, and to do this, I need to know where the next available space is.
I have a solution which I have been using for ages now, which checks each cell in an appropriate column until a sequence of 3 blank cells has been found as I can guarentee that the tables are at most 2 cells apart. It then sets i=i-3 to give me the location of the first empty cell.
Blankcount = 0
i = 3
While Blankcount < 3
If Cells(i, 3) = "" Then
Blankcount = Blankcount + 1
Else
Blankcount = 0
End If
i = i + 1
Wend
i = i - 3
View 2 Replies
ADVERTISEMENT
Oct 18, 2009
I have data entered in rows 2:10. The amount of data is variable for each row. For example, in row 2, columns A:F are filled out, and the rest (G:P) are blank. In row 3, columns A:J are filled out and K:P are blank. The data is always entered from left to right, and to a maximum up to column P. Hope this makes sense.
In column Q, I want to write a formula that will tell me the last filled column of that row (A=1, B=2, C=3, etc.). So in Q2 would display 6. Row 3 would display 10. And so on.
View 3 Replies
View Related
May 4, 2009
Is there any formula or macro that can be used to detect the value of the last filled in cell in a column or row? For example, I fill in column B each day with a new numerical variable, so on day one B1 = 100, on day 2 B2 = 200, on day 3 B3 = 150 and so on. I would like the last variable entered in column B to appear in, for example, cell A1. Is there any way to do that?
View 9 Replies
View Related
Aug 22, 2006
My is updated very frequently and i just wonder if it is possible to display the last filled cell of a certain column in another cell.
Imagine column B (B5:B1253) is filled with average sales values by using formula "B$5:B5" and i want to display the most uptodate average value in cell B1.
View 3 Replies
View Related
Mar 15, 2007
I need a formula or macro to fill a cell with the last entry in a given column.
Anyone have any advice?
View 9 Replies
View Related
Jun 20, 2008
I want a macro to be able to select & highlight (ready for copy/paste) all cells in the column range "A2" to the last populated cell in column A.
View 3 Replies
View Related
Dec 1, 2007
I did find information from other posts but with my mininal knowledge of VBA, I am not able to apply the macros for my need. I have an order form. Row 1 to 10 contain personal information. Column A is the "quantity" and Column E is the " total" with a formula. If cell of column E is filled (contain the $ amount), I want the whole row copied to another sheet. I also want row 1 to 10 to copy to the other sheet as well.
View 3 Replies
View Related
Jun 1, 2012
I am trying to work out some code that will allow me to search worksheet2 to find the last filled cell in column A.
I would then like to copy the contents of the cell.
Then past this data into the first empty cell in a column in worksheet2
View 1 Replies
View Related
Apr 24, 2009
I think I am working all around this in Excel 2003 and feel like I am in the neighborhood, but can't seem to quite get there. On sheet1 I have 2 columns of 100s of rows. All of the cells in column A will be filled in with a date as time goes by (1-May-09 for example). Several of them may be 1-May-09 as a matter of fact. In column B, some of the cells will have a number in them and some of them will be empty. On sheet2, I want to construct a formula that returns a count of cells in column B that have a number in them based on a specific date in column A. For example:
AB
1-May
1-May777
1-May
1-May
1-May
2-May999
3-May
2-May
1-May
2-May111
1-May
If I could get the formula right, it would return an answer of 1 for 1-May in the example, because only 1 of the 1-May entries in column A has a number in the adjacent cell in column B. A formula for 2-May would return an answer of 2 since only 2 of the 2-May entries in column A have numbers in the adjacent cell in column B, and so on for the month. If I understand things right, there are too many arguments for COUNTIF. It seems that SUMPRODUCT should work, but I can't make it so.
View 2 Replies
View Related
Feb 14, 2013
Right now the code below reference AI on sheet BOM. However, I need it to be either referenced by being the last filled row on sheet BOM or by having the word "rounded" on row 4 --what which over column on row 4 that has the word "rounded".
Current code:
Range("J2").Select If Sheets("BOM").Range("C4") = "" Then
ActiveCell.FormulaR1C1 = "=BOM!R[3]C[25]"
Else
ActiveCell.FormulaR1C1 = "=BOM!R[4]C[25]"
End If
View 1 Replies
View Related
Jul 17, 2014
Currently, I have a standard vlookup forumla that looks like =Vlookup(B2,Sheet2!A:G,5,false)
However, the data on sheet two is ever expanding--each month, specifically. And I need to return the most recent (so, rightmost filled) column. Right now, the column is 5, but next month it will be 6 and so on and so forth.
View 7 Replies
View Related
May 20, 2014
I putting together a spreadsheet that applies Payments (as they come in) against the oldest open invoice. As payments come in, old invoices are closed out. An aging is done and late fees are applied.
I have made a macro that inputs all of the information of the invoice in a list. However, when a payment comes in, I am trying to write a macro that:
1) in column G - Finds the first non-zero balance
2) Applies the payment amount to that open invoice. If there is additional funds left over after the satisfaction of that invoice, I would like the payment to be applied to the next open invoice until all the funds of the payment have been drained.
I am having so much trouble trying to even just locate the first nonzero balance and select it.
View 13 Replies
View Related
Oct 20, 2009
I have the following code. Is there any way to select a range once the last cell with data is found. I would like to be able to select whatever cell in column A is selected with the code below through E2.
View 4 Replies
View Related
Mar 23, 2012
This macro
ActiveSheet.Range("A65536").End(x1up).Offset(1,0).Select
when run locates the next empty cell in Column A perfectly. But.... how can I get this to work from a button located at the top of the spreadsheet?
I am only a copy and paste man where macros are concerned!
View 4 Replies
View Related
Jun 29, 2012
How would I do a vba for finding a blank cell in column D, and when a blank cell is found, delete and shift up cells D through N on the same line?
View 2 Replies
View Related
Jul 24, 2009
I'm looping through and finding a cell based on Column A, and I .resize(,5).select and from that selection I want to create a range called "LCrng"
View 9 Replies
View Related
Aug 17, 2009
I want to find the largest cell in a column so I can use “auto fit selection” without cutting off type.
View 9 Replies
View Related
Sep 8, 2009
I am looking for a formulas to first find the middle number in a column of numbers eg 1,2,3,4,5 3 is the middle (similar to median) thats where the calculations start...
it then assigns values of minus to the numbers above the middle and plus values to the numbers below the middle
1 -50
2 -50
3 0
4 +50
5 +50
now when it comes to even numbers eg 1,2,3,4,5,6 if i use median it divide 3 & 4 and comes up with 3.5 ........ i want it to recognize 3 and 4 as the middle numbers
and assign plus and minuses above and below the middle numbers
1 -50
2 -50
3 -25
4 +25
5 +50
6 + 50
View 14 Replies
View Related
Jul 21, 2009
I have a column array with various cells in that array populated. In every subsequent cell in that array I want a formula that finds the previously populated cell and that value added a cell that is in the same row but two columns to the left.
View 13 Replies
View Related
Aug 27, 2013
I am attempting to update a column of numeric values based on finding and validating record IDs in two different worksheets. So for example if in worksheet1 in column 'C' the ID is 1234ETC and in worksheet2 1234ETC is found then I want to update worksheet2 in the corresponding cell for that record ID in column 'J' with the information from worksheet 1. So far I have been using a routine like the following to go through and compare the ID's but now I need to update the other cells in column 'J' reveiw the following and see if there is a way to improve upon this.
Sub UpdateCommitmentAmtsFromImport()
Application.ScreenUpdating = False
Dim bottomC1 As Integer
[Code]....
View 1 Replies
View Related
Jul 23, 2014
I have two columns that are the same field, both Middle Name. The first column does not have every single row filled and the second column has every row the first column does not have and vice versa. I want to merge them to one filled column.
View 2 Replies
View Related
Jan 15, 2009
Is there any way to a column be filled automatically by what is written on others columns.
Example: If one of the cells A2 or B2 and C2 are Nonblank, fills automatically the cell H2 with "ABC2" And If some of the cells D2 and E2 are Nonblank fills the cell H2 with "DE2"
View 2 Replies
View Related
Sep 18, 2013
I have a column in excel sheet of more than 1000 different names. I want to add S/o with each name how can I do that ?
View 4 Replies
View Related
Oct 29, 2013
I created a lab result page for long term patients. thus, they may have 1 to 1000 lab results. so i need to create an infinite print range, but just printing the filled ones.
Right after column J, print 2nd page if filled, if not, dont. And printing A1:J6 to every page is a good solution to not to lose data in long term.
[URL]
View 3 Replies
View Related
Jan 7, 2014
I would like to figure out a formula that will calculate what percentage of a column is filled based on the total number of rows.
For instance if I have Column K and that will have delayed savings by sales pursuit, I want to be able to calculate the percentage of what is being delayed from a total number of pursuits (basically the count of rows in column A). Ideally this would be a dynamic range (offset).
Ex. Say I have 25 rows in column A, but I only have 2 rows in column K filled. How can I calculate that there is a 8% (2/25) delay?
View 2 Replies
View Related
Apr 15, 2009
I have to convert a excel workbook I have into a csv for import into a database. The workbook contains multiple worksheets that are named individually. What I would like to do is get a way or code to add a column to the beginning of each worksheet and then populate each cell of that new column (column A) with the name of the worksheet (of course only up to the range of the data). I already have a macro that can copy and consolidate the contents of all the sheets into a single sheet.
View 2 Replies
View Related
Nov 15, 2008
I am making a worksheet that I intend to use to track my money. When I first open the worksheet, it opens on a tab where I can click a button to report a type of transaction. For example, if I make a withdrawl from the bank for $50, I click the button, it takes me to the sheet that tracks my bank-related stuff, selects a cell and opens up a form, at which point I type in what the transaction consisted of. However, the sheet also tracks what is in my wallet, so I'd like to finish reporting the bank transaction in the form, and have a button to click that reports the wallet part automatically.
So, essentially what I need to do is select several non-contiguous cells that are in the last row of the bank sheet, copy them, switch to the wallet-tracking sheet, and paste them in a row that is one past the last row of that sheet. The paste should keep the cells next to each other, even if they were non-contiguous when they were being copied.
View 10 Replies
View Related
Dec 19, 2012
I have this data lets say id denotes a particular house and the multiple entries of the same house are for different members of a house. Now i want to calculate the total no of people who earn in a particular household i.e if a cell is filled or not.
idB C
00118000040000
001
001
001
002170000
[code].....
View 2 Replies
View Related
Oct 28, 2013
I just had an employee come to me and ask to take a look at his Excel spreadsheet. One of the columns auto filled the word General all the way down. I tried to do a find and replace but it did not work. Then I tried to just delete the cell and noticed that the text disappears when you click into the cell. This "ghost" text is frustrating me and I can not get it removed
View 1 Replies
View Related
Aug 15, 2009
A column (A1:A60) is being progressively filled in with numbers, and occasionally some blank cells are between.
I need a formula to work out the number of the remaining cells (that are yet to be filled in) from the last entry till the last cell (A60) of the column.
View 7 Replies
View Related
