I have the following code. Is there any way to select a range once the last cell with data is found. I would like to be able to select whatever cell in column A is selected with the code below through E2.
View 4 Replies
I have a table (Sheet 1) with four columns data, A,B,C and D. There are about 60,000 entries in them. In Sheet 2, I wish to enter a value in A1 which will be from A OR C columns of Sheet1 and get its corresponding value from B or D (Sheet1) in B1 (Sheet2) with the help of a formula. i.e. IF(A1, Sheet1!A60000:C60000, then B1 = B or D of Sheet1).
View 2 Replies View RelatedAny way to search for a value down column A, another value across roW 1, and tells what value lies in the cell at their meeting point. 4 example, I'm looking For "47" somewhere in column a, and also the number 53 somewhere in row 1, and I need to know what value is in the cell where those to meet.
View 1 Replies View RelatedI have a main soure data which consist of row & column information. What i want to do is search the data from the source data into my result data as per the attachment file. Example: I want to information of Jan & banana from the main source file to appear in the XXXX
Result data(criteria base on Month & type)
JanApril
BananaXXXX
Apple
Orange
Any quick way to extract data from a table. I need to extract a value from a column that meets criteria from two different columns. I thought I could get this to work with vlookup, but have had no success. Sample data below in table 1 and I would like to get my data into table 2.
elevation
type
grade
percent
weight
5000
5000
5000
5020
[Code] ..........
I putting together a spreadsheet that applies Payments (as they come in) against the oldest open invoice. As payments come in, old invoices are closed out. An aging is done and late fees are applied.
I have made a macro that inputs all of the information of the invoice in a list. However, when a payment comes in, I am trying to write a macro that:
1) in column G - Finds the first non-zero balance
2) Applies the payment amount to that open invoice. If there is additional funds left over after the satisfaction of that invoice, I would like the payment to be applied to the next open invoice until all the funds of the payment have been drained.
I am having so much trouble trying to even just locate the first nonzero balance and select it.
This macro
ActiveSheet.Range("A65536").End(x1up).Offset(1,0).Select
when run locates the next empty cell in Column A perfectly. But.... how can I get this to work from a button located at the top of the spreadsheet?
I am only a copy and paste man where macros are concerned!
How would I do a vba for finding a blank cell in column D, and when a blank cell is found, delete and shift up cells D through N on the same line?
View 2 Replies View RelatedI'm looping through and finding a cell based on Column A, and I .resize(,5).select and from that selection I want to create a range called "LCrng"
I want to find the largest cell in a column so I can use “auto fit selection” without cutting off type.
View 9 Replies View RelatedI have written several pieces of VBA code which produce a sequence of tables on a single worksheet (with the rather original title "Tables"). The code often adds tables to the end of the current set of tables, and to do this, I need to know where the next available space is.
I have a solution which I have been using for ages now, which checks each cell in an appropriate column until a sequence of 3 blank cells has been found as I can guarentee that the tables are at most 2 cells apart. It then sets i=i-3 to give me the location of the first empty cell.
Blankcount = 0
i = 3
While Blankcount < 3
If Cells(i, 3) = "" Then
Blankcount = Blankcount + 1
Else
Blankcount = 0
End If
i = i + 1
Wend
i = i - 3
In my table I want to create a user form where the individual would enter a number which would correspond for the Header Row.
and
The user would also enter a Number that would correspond for the first main column (Column B).
Based on the numbers entered, I want to find the next highest number.
For example if 61 is entered 66 would be chosen.
-Same would be for the numbers entered to find the column.
Based on the numbers entered I would like to find the intersecting cell.
Basic code I can embed in a user form?
I am looking for a formulas to first find the middle number in a column of numbers eg 1,2,3,4,5 3 is the middle (similar to median) thats where the calculations start...
it then assigns values of minus to the numbers above the middle and plus values to the numbers below the middle
1 -50
2 -50
3 0
4 +50
5 +50
now when it comes to even numbers eg 1,2,3,4,5,6 if i use median it divide 3 & 4 and comes up with 3.5 ........ i want it to recognize 3 and 4 as the middle numbers
and assign plus and minuses above and below the middle numbers
1 -50
2 -50
3 -25
4 +25
5 +50
6 + 50
I have a column array with various cells in that array populated. In every subsequent cell in that array I want a formula that finds the previously populated cell and that value added a cell that is in the same row but two columns to the left.
I am attempting to update a column of numeric values based on finding and validating record IDs in two different worksheets. So for example if in worksheet1 in column 'C' the ID is 1234ETC and in worksheet2 1234ETC is found then I want to update worksheet2 in the corresponding cell for that record ID in column 'J' with the information from worksheet 1. So far I have been using a routine like the following to go through and compare the ID's but now I need to update the other cells in column 'J' reveiw the following and see if there is a way to improve upon this.
Sub UpdateCommitmentAmtsFromImport()
Application.ScreenUpdating = False
Dim bottomC1 As Integer
[Code]....
I am making a worksheet that I intend to use to track my money. When I first open the worksheet, it opens on a tab where I can click a button to report a type of transaction. For example, if I make a withdrawl from the bank for $50, I click the button, it takes me to the sheet that tracks my bank-related stuff, selects a cell and opens up a form, at which point I type in what the transaction consisted of. However, the sheet also tracks what is in my wallet, so I'd like to finish reporting the bank transaction in the form, and have a button to click that reports the wallet part automatically.
So, essentially what I need to do is select several non-contiguous cells that are in the last row of the bank sheet, copy them, switch to the wallet-tracking sheet, and paste them in a row that is one past the last row of that sheet. The paste should keep the cells next to each other, even if they were non-contiguous when they were being copied.
assist me with editing this code so that even though my range may be set from A1:A3000 it would stop after finding and completing its task in the last cell in column A with data. This code will put dashes in a set of numbers and there is no certain amount of account numbers that could end up being in column A on any given month.
View 3 Replies View RelatedI have a simple problem and I'm sure someone out there has the simple answer i'm looking for. Here's my problem:
I have a column of cells with data in them (no formulas, just "hand-written" data). I would like to find the last cell in the column that has data, but without using VBA.
I tried to find help, and I thought I might be able to use the LOOKUP formula, but since I never used it before, I kinda hit a wall... is there any other formulas that might do the job? or do I absolutely have to use VBA?
After I find the last cell with data, I will use it in another formula in another cell... nothing too complicated, but I need (if possible) the data in the cell to be returned to the other cell for the other formula.
I know this will tell me how many rows I have:
[Code] .....
But I have a column of data with empty cells interspersed. How do I find the first cell in the column with data in it?
Is it possible to have a marco that will look at the data in a cell/multiple cells and search a network drive for a folder named with the same data in a cell? For example, I used a marco to create a folder from the contents in cell A2. Can a macro be reversed in that if I have a spreadsheet with a list of data in A2,A3, A4 and so on, can it check a network drive to see if a folder has been created with the same data?
View 10 Replies View RelatedI have two columns. One column has UPCs - some of which are duplicates. The second column just has number values. I'm trying to add the sum of all of the numbers in column two which are attached to their respective UPC. For example,
COL A///// Col B
11111111111///// 10
00000000000///// 15
11111111111///// 10
11111111111///// 4
00000000000///// 2
So, I need a third and fourth column to give me the total value for a single SKU(col A) of all the values in col B. In this example the Third column would contain the SKU, and the fourth column would contain the sum of all values in column B that are associated with the single SKU in column three. The third and fourth column would look like this:
COL C///// COL D
11111111111///// 24
00000000000///// 17
Here is what I am trying to accomplish.
I have to columns.
I have copied column A from a PDF file. It contains entries like this, all in the same column:
5 0.002HP Direct- 26845 7/1959 Airesearch
This column contains an ID # (5), a description (0.002HP Direct), a part # (26845), a date (7/1959), and a manufacturer (Airesearch). All this info is in one column. This column is 11,000+ entries long.
I have column B which is 45,000+ entries long, and contains ONLY part numbers, like this:
325111
I would like to compare column B to find the matching results from within the text of column A, and put these matches into column C.
augmenting current code to select the column after a column. Current code is:
Code:
If Sheets(data_sheet1).Cells(2, iCol).Value = "Stations" Then TargetCol = 1
If Sheets(data_sheet1).Cells(2, iCol).Value = "Agency" Then TargetCol = 2
If Sheets(data_sheet1).Cells(2, iCol).Value = "Advertisers" Then TargetCol = 3
If Sheets(data_sheet1).Cells(2, iCol).Value = "Product Code" Then TargetCol = 4
The next line should find the column after "Product Code".
I have a working formula that gives me the last value in a column using Index formula below. How can i slightly adapt the formula to find the maximum value in that column instead?
=LOOKUP(10^99,INDEX('Data Drop'!$A$15:$AZ$10000,,MATCH($H$9,'Data Drop'!$A$15:$AZ$15,0)))
How can i know name of the column.
Example:
want to look at a row and find out what column has a Y in it
View 10 Replies View RelatedUsing and array to go through a series of sheets and do stuff (Thanks Gerald and Von Pookie BTW). I have used code which finds the last row (varies from sheet to sheet), but not the last column (which also varies sheet to sheet).
Finding Last row
LastRow = Range("A" & Rows.Count).End(xlUp).Row
However this code doesn't seem to work for last column...sample...
LastCol = Range("A" & Columns.Count).End(xlLeft).Column
Is there a trick I'm not seeing? Does this only work using the 'Cell' function in VBA? If so, how would the line of code look? I'd really prefer finding the column letter as opposed to using the 'Cell' method if possible.
I am currently using the following code to find the last cell in a column that contains data.
lLastRow = ActiveSheet.Cells(Rows.Count, "a").End(xlUp).Row
Can anyone give me the version of this that would find the last cell in a row that contains data. The code would be used in a loop so I would need the row reference to be a variable.
I need to append this macro to find the next empty column to place the data in. The orignal VBA works fine, but I need to go into the editor, and repalce the offset number every time I add a new row (weekly).
Here's the orignal coding:
I have a large list of numbers in two columns. I need to know what numbers are in column A but don't appear in column B. For example if the numbers are 1 2 and 3 in column A but column B only has 1 and 2 I need to know that 3 is missing.
the only thing I can think of is doing =IF(A1=B1,"TRUE","FALSE") however typing this a thousand times would not be practical.
Is there a macro that can check column A against column B and tell me which ones are missing?
