Update Cell Based On Finding Value From Another Column
Aug 27, 2013
I am attempting to update a column of numeric values based on finding and validating record IDs in two different worksheets. So for example if in worksheet1 in column 'C' the ID is 1234ETC and in worksheet2 1234ETC is found then I want to update worksheet2 in the corresponding cell for that record ID in column 'J' with the information from worksheet 1. So far I have been using a routine like the following to go through and compare the ID's but now I need to update the other cells in column 'J' reveiw the following and see if there is a way to improve upon this.
Sub UpdateCommitmentAmtsFromImport()
Application.ScreenUpdating = False
Dim bottomC1 As Integer
[Code]....
View 1 Replies
ADVERTISEMENT
Jul 24, 2009
I'm looping through and finding a cell based on Column A, and I .resize(,5).select and from that selection I want to create a range called "LCrng"
View 9 Replies
View Related
Dec 11, 2008
I have a basic formula =C17+'Asset Depreciation 2008 Onwards'!C24, and I want to copy it down just using the drag function. Problem is that the second reference range of cells are in rows and hence when I copy it down it doesn’t automatically update the cell references because it want to update them by column number instead of row number. IE I want it to display =C17+'Asset Depreciation 2008 Onwards'!
D24, instead of C25. Do you know if there is any way of telling Excel that I want it to increase the column number by 1 every time, instead of the row number for this part of the formula?
View 5 Replies
View Related
Nov 7, 2008
This should be simple to do but I can't figure it out. I have a database that lists operating room numbers in one column and the length of the surgeries performed in those rooms in another column.
I need a formula that will give me the longest OR time for a given room. For example the room numbers are in column A and the OR times are in Column B. I've tried something like
View 6 Replies
View Related
Apr 24, 2014
I have 2 columns of data in Excel which I have brought a small section of it below. As can be seen the values in the left column have a large spike (difference of more than 10) at certain points (in this case at 34). I wan to find the average of the numbers in the right column but only till the point where the large spike happens (in this case the average of the first 5 numbers). I've tried AVERAGEIF but it's not what I want. I want this to repeat for the entire column and give me the averages of each of these groups.
10
32.4
11
38.6
12.5
23
[Code] .........
View 2 Replies
View Related
Jun 15, 2006
I have a main soure data which consist of row & column information. What i want to do is search the data from the source data into my result data as per the attachment file. Example: I want to information of Jan & banana from the main source file to appear in the XXXX
Result data(criteria base on Month & type)
JanApril
BananaXXXX
Apple
Orange
View 4 Replies
View Related
Feb 22, 2014
In my table I want to create a user form where the individual would enter a number which would correspond for the Header Row.
and
The user would also enter a Number that would correspond for the first main column (Column B).
Based on the numbers entered, I want to find the next highest number.
For example if 61 is entered 66 would be chosen.
-Same would be for the numbers entered to find the column.
Based on the numbers entered I would like to find the intersecting cell.
Basic code I can embed in a user form?
View 1 Replies
View Related
Jan 2, 2013
This formula allows me to find the lowest value in column U where column N contains the text "NO".
{=MIN(IF($N$2:$N$10000="NO",$U$2:$U$10000))}
I want to add another condition so that the formula only returns the lowest value in column U where (i) column N contains the text "NO" and also (ii) column F contains the text "YES".
View 11 Replies
View Related
Sep 4, 2008
What I've got is 2 worksheets. One is updated every month with new data and therefore the style of the new worksheet is likely to change.
The other one is static and needs to take the data from the updated one. I can't just use a basic =sheet1!A1 because the data will get moved around.
I need to be able to tell it to: look in the new sheet, based off the column heading and row heading find the cell and copy it to the same place on the static sheet. e.g.
In G14, I need it to find on the second sheet "Apr 08" as the column heading and "Yell.com" as the row heading and put it in G14.
It would be easy to do it manually, but as the spreadsheet grows, it'll be harder and harder.
View 9 Replies
View Related
Apr 30, 2009
I am trying to find some VBA that will allow protected cells to be updated when a user enters or selects data in other cells.
For example:
Cell 'A1' starts out blank.
Cell 'B1' has a drop down to select specific items.
Cell 'C1' is the date of the order and is a locked cell.
Cell 'D1' is the date of completion and is a locked cell.
The worksheet is protected to prevent direct changes to cells C1 and D1.
If a user enters any information in A1, then C1 displays the current date.
If a user selects 'Complete' from the drop-down list in B1, then D1 displays the current date. Both of these actions are independant of one another. This format is the same for every cell in the 4 columns indicated above. I thought I was able to do this in another spreadsheet I created a year or so ago but I have not been able to figure out what I did and I do not have the spreadsheet to look at.
View 5 Replies
View Related
May 21, 2014
I have a macro written that pulls data off another workbook and places it on a sheet on the my main workbook. The macro is set to auto filter based on whats in Column 1. The code for this is below:
ActiveSheet.Range("$A$1:$AE$46303").AutoFilter Field:=1, Criteria1:= _ "201504"
Now what I was wondering is there a way for it reference say cell I12 on sheet2 in the main workbook and pull that data instead when the macro is run via a button. The number listed is a date code so say we change it too "201503". I would like to pull all those dates instead of the ones for "201504".
View 3 Replies
View Related
Apr 4, 2008
I have an update summary macro which takes certain cells from certain sheets and displays this data in a summary workbook.
One of the columns, called status runtime pulls cell J5 of each of the sheets which is a formula =TODAY()-J4 for example.
The problem I am having is that when I open the summary sheet from one day to the next, this particular column is not updating. To update the column I have to go into each individual sheet and save so that the TODAY formula updates the value of the cell, and then thus the summary sheet value.
Perhaps I should avoid putting the formula in each sheet and make a formula behind the summary sheet which takes the value in the status runtime column and subtracts TODAY() from it, then it would update as and when the summary sheet is opened.
View 9 Replies
View Related
Jan 12, 2007
I`m trying to work out the best way to propogate a cell's format accross an entire range. What I ultimately want is for a user to only have to change the text colour of one cell, and for the entire row to immediately change to the same colour with it. Even if this means always having to update for example the cell in column A to change the text colour accross that row.
View 2 Replies
View Related
Jun 1, 2006
I need to find the row number of a cell based on a particular value. I am populating a row within a spreadsheet with a value (the columns have unique identifiers). After that is done, I need to go to a different spreadsheet, grab different values, and place them in a different column in the above referenced spreadsheet. So, what I want to do is find the row number for the unique identifier, then place the value in the column.
View 3 Replies
View Related
May 2, 2012
I am creating a macro to automate data analysis for work, but I've become stuck.
I need to find the coordinate of the first cell in a column with word "reserved" or "extended" contained in the cell, and then assign the row number of that coordinate as a variable to use for moving data around. Basically, I want something like VLOOKUP, but instead of returning a value, I want it to return the coordinate.
View 1 Replies
View Related
Mar 5, 2009
In sheet 1, there are two columns, Category and Subgroup. The cell validation for Category is pulled from the category list on sheet 2. Basically, what I want to happen is depending on what is selected as the category, only the related sub-groups would be populated in the sub-group validation dropdown list. In other words, if Fruit is selected as the category, I only want Apple, Orange, Pear, Banana, etc to be in the validation drop down list for the sub group. If vegetable, then only Corn, Green Bean, Cucumber, and Peas should be shown.
I've included two options for the relationship list as I'm not tied to either style and not sure which would be easier to work with.
View 9 Replies
View Related
May 30, 2007
I have a spreadsheet with 2000 rows, and I need to add one column with the IF function that looks at the cell in the column to the left for each row, all the way down. How do I do that without typing in the specific different cell references for each row in my IF column?
View 4 Replies
View Related
Jan 25, 2012
Macros question - The user enters a word, e.g. Malaysia in a particular cell (always the same location) and I want the macro to be able to find the next cell with that word in it, but it appears that when using macros you can't paste anything into the find function, so was just wondering what to do!
View 1 Replies
View Related
Nov 17, 2011
I want to color a cell based upon finding a corresponding value from a table.
Ex: In Cell B3: If B4 Value is in the Scorecard Table Then B3 will be a certain color.
This is for highlighting critical fields.
The Table name is Scorecard and I also have a named range of Scorcard_Fields within the Scorecard Table that holds the Lookup Values.
View 4 Replies
View Related
Jul 24, 2013
i want to update values fon an excel sheet on a month by month basis. So i have jan to dec folders and excel sheets under each folder , i want to update my monthly forecast sheet based on the numbers in the folder I want to just change the cell in my monthly forecast sheet to Jan or Feb and the values should be pulled from the closed excel files in the monthly folders. I tried concatenation but it gave me #REF .. Is there a way to do it other than using "pull" ??
View 1 Replies
View Related
May 20, 2014
I putting together a spreadsheet that applies Payments (as they come in) against the oldest open invoice. As payments come in, old invoices are closed out. An aging is done and late fees are applied.
I have made a macro that inputs all of the information of the invoice in a list. However, when a payment comes in, I am trying to write a macro that:
1) in column G - Finds the first non-zero balance
2) Applies the payment amount to that open invoice. If there is additional funds left over after the satisfaction of that invoice, I would like the payment to be applied to the next open invoice until all the funds of the payment have been drained.
I am having so much trouble trying to even just locate the first nonzero balance and select it.
View 13 Replies
View Related
Oct 20, 2009
I have the following code. Is there any way to select a range once the last cell with data is found. I would like to be able to select whatever cell in column A is selected with the code below through E2.
View 4 Replies
View Related
Mar 23, 2012
This macro
ActiveSheet.Range("A65536").End(x1up).Offset(1,0).Select
when run locates the next empty cell in Column A perfectly. But.... how can I get this to work from a button located at the top of the spreadsheet?
I am only a copy and paste man where macros are concerned!
View 4 Replies
View Related
Jun 29, 2012
How would I do a vba for finding a blank cell in column D, and when a blank cell is found, delete and shift up cells D through N on the same line?
View 2 Replies
View Related
Aug 17, 2009
I want to find the largest cell in a column so I can use “auto fit selection” without cutting off type.
View 9 Replies
View Related
Jul 15, 2006
I have written several pieces of VBA code which produce a sequence of tables on a single worksheet (with the rather original title "Tables"). The code often adds tables to the end of the current set of tables, and to do this, I need to know where the next available space is.
I have a solution which I have been using for ages now, which checks each cell in an appropriate column until a sequence of 3 blank cells has been found as I can guarentee that the tables are at most 2 cells apart. It then sets i=i-3 to give me the location of the first empty cell.
Blankcount = 0
i = 3
While Blankcount < 3
If Cells(i, 3) = "" Then
Blankcount = Blankcount + 1
Else
Blankcount = 0
End If
i = i + 1
Wend
i = i - 3
View 2 Replies
View Related
Jul 4, 2012
I can easily use VBA to update a column's next cell with a value from a static cell. As easy as this may be for most, I seem to be struggling!
For example, I would like cell B3 (then B4, B5, B6 etc) to update, according to a value (time frame in seconds) in cell C3, with a value from the cell D3.
View 1 Replies
View Related
Feb 7, 2014
I'm working on a workbook where I'm linking data from a bunch of spreadsheets to a summary page. I have the first column (A) set up. I dragged the data across several more columns. Now I need to change reference to the tab in each column. Is there a quick way to do this without copying and pasting the tab name into each row (about 30 rows)?
(Each column represents a tab, the rows are the same type of data in every tab.)
View 1 Replies
View Related
Aug 22, 2014
I do data entry for a driveway company. I get addresses and phone numbers, and then call the people to offer services. I keep track of my calls on the spreadsheet, color coded for my results, green for leads, yellow for voicemail/no answer, and red for not interested.
I have formulas in cells M2 through M8 to give me my overall stats for the calls I have made, it filters them by color for leads, missed calls, and rejections, and a couple other stats (mostly for my own curiosity)
What I'm trying to add is the cells L10 to M13, I want to be able to input a date, for instance 8/15, and have it run the same stats, just for that day essentially. So, I need it to search the last 2 columns in the table for the text that I input into cell M10, and then run the color based formula on those cells, and total them up in the appropriate cells, M11, M12, and M13.
The 2 Stats tables are the same at the moment in the sample, as I only included one particular street that I have mapped, my actual table is nearly 3000 rows.
View 3 Replies
View Related
Jan 6, 2009
Is it possible to have a marco that will look at the data in a cell/multiple cells and search a network drive for a folder named with the same data in a cell? For example, I used a marco to create a folder from the contents in cell A2. Can a macro be reversed in that if I have a spreadsheet with a list of data in A2,A3, A4 and so on, can it check a network drive to see if a folder has been created with the same data?
View 10 Replies
View Related
